OPERATOR'S MANUAL Cat. No. M18B2 Cat. No. M12-18AC M12-18FC Cat. No. M18BX M18B4 M18B5 M18B6 M18B9 Cat. No. M12B2 M12B3 Cat. No. M12B4 M12B6 New batteries must be M12™ / M18™ MULTI VOLTAGE CHARGERS M12™ AND M18™ LI-ION BATTERY PACKS WARNING To reduce the risk of injury, user must read and understand operator's manual.
IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all SAVE THESE INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS - THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE MILWAUKEE® LI-ION COMBO CHARGERS AND MILWAUKEE® M12™ AND M18™ LI-ION BATTERIES. 2. BEFORE USING THE BATTERY PACK AND CHARGER, READ THIS OPERATOR’S MANUAL, YOUR TOOL OPERATOR’S MANUAL, AND ALL LABELS ON THE BATTERY PACK, CHARGER AND TOOL. CAUTION 3.
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE. V SYMBOLOGY Volts Direct Current Alternating Current Rated voltage Rated capacity Cell type M12B2 12V ≤ 2.0 Ah Li-ion M12B3 12V ≤ 3.0 Ah Li-ion 3 M12B4 12V ≤ 4.0 Ah Li-ion 2x3 M12B6 12V ≤ 6.0 Ah Li-ion 2x3 M18BX 18V ≤ 3.0 Ah Li-ion 2x5 M18B2 18V ≤ 2.0 Ah Li-ion 5 M18B4 18V ≤ 4.0 Ah Li-ion 2x5 M18B5 18V ≤ 5.0 Ah Li-ion 2x5 M18B6 18V ≤ 6.0 Ah Li-ion 2x5 M18B9 18V ≤ 9.
MILWAUKEE® LI-ION BATTERY PACKS 12V AND 18V WARNING To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack 18V or charger in fluid or allow a fluid to flow inside Fuel Gauge them. Corrosive or conductive fluids, such as Use the Fuel Gauge to determine the battery pack's seawater, certain industrial chemicals, and remaining run time. Press the Fuel Gauge button to display the lights.
MILWAUKEE® LI-ION COMBO CHARGER •If the light indicator does not come on, check that the battery pack is fully seated into the bay. Remove the battery pack and reinsert. If the light indicator still does not come on, remove pack(s) and unplug charger for at least 2 minutes. After 2 minutes, Charge only MILWAUKEE® 12V plug charger back in and insert pack.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.