HD18 JSB Original instructions
16 18 Text section with Technical Data, important Safety and Working Hints and description of Symbols 14 START 9 STOP 17 4 10 8 6 2 15 11 12 13 3
1 Remove the battery pack before starting any work on the machine.
1 2 3 TEST Press the saw blade into the Fixtec holder up to the stop.
1 + - MIN 2 click MAX 8 9
1 1 In case the base plate can't be tensioned anymore after frequent adjusting, the base plate setting mechanism can be re-adjusted.
2 3 4 12 13
START Startup protection: When switched on, the machine will not start up after the battery is inserted again. To continue working, switch the machine off and then on again.
1 2 1 Load-dependent motor protection: If the motor is overloaded, the overload protection will trip. To continue working, switch the machine off and then on again.
TECHNICAL DATA CORDLESS JIGSAW HD18 JSB Production code .................................................................................................... .......................... 4030 38 04.. ...000001-999999 Battery voltage ...................................................................................................... ................................18 V Stroke rate under no-load 1st gear ........................................................................................................
l x (mm) (mm) 4932... Id.-No.
22 23
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (10.
