HD18 AG115 HD18 AG125 Original instructions
10 12 15 4 14 START STOP 8 7 6 16 2 Text section with Technical Data, important Safety and Working Hints and description of Symbols 3
1 Remove the battery pack before starting any work on the machine.
1 1 2 click 2 0° 3 6 30° 60° 30° 60° 7
1 1 2 2 1 2 2 3 8 3 1 9
Use only spindle nuts as provided by the manufacturer.
1 Accessory Accessory 2 12 1 2 13
START 1 30° 2 STOP 14 15
TECHNICAL DATA Angle Grinder Production code HD18 AG115 HD18 AG125 4675 90 02... ...000001-999999 18 V 10000 min-1 115 mm 22,2 mm 4675 95 02... ...000001-999999 18 V 10000 min-1 125 mm 22,2 mm b=Grinding disk thickness max.. 6 mm (1/4") 6 mm (1/4") b=Cutting disk thickness min. / max. 1,0 / 3 mm 1,0 / 3 mm D=Grinding surface diameter max. 115 mm 125 mm D=Wiring brush diameter max. 75 mm 75 mm Battery voltage Rated speed D=Grinding disk diameter max.
Safety Warnings Specific for Sanding Operations: a) Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback. Safety Warnings Specific for Wire Brushing Operations: a) Be aware that wire bristles are thrown by the brush even during ordinary operation.
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (10.
