Service Parts List S/N 697A

MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. Lisbon Road, Brookfi eld, WI 53005
Drwg. 1
FIG. PART NO. DESCRIPTION OF PART QTY.
1 43-40-0310 Frame (1)
2 42-52-0370 Tube Cap (16)
3 45-60-0550 Support (1)
4 06-75-0345 5/16"-18 x 2-1/2" Hex Hd. Cap. Bolt (8)
5 06-57-5037 5/16"-18 Nylock Nut (5)
6 44-60-1340 Lock Pin (1)
7 43-40-3020 Support Base (1)
8 45-76-0400 1-1/2" Square Tube (1)
9 45-76-0410 1-3/8" Square Tube (1)
10 45-76-0390 Guide Tube Assembly (1)
11 45-88-8405 3/8" x 1-5/8" Square Washer (2)
12 06-55-1985 5/16-18 Heavy Hex Nut (4)
13 43-54-0720 Rear Guard (1)
14 06-85-5336 10 x 3/4" Self-Drilling / Tapping Screw (10)
15 43-72-0190 Cord Keeper Assembly (1)
16 45-22-0510 Sleeve (1)
17 42-87-0110 Counter Balance (1)
18 06-10-0460 1/4"-20 x 5/8" Carriage Bolt (6)
19 06-55-1525 1/4"-20 Hex Nut (17)
20 45-88-5220 1/4" I.D. Washer (2)
21 42-70-5130 Cable Clip (1)
22 42-20-1025 Saw Base (1)
23 43-98-0450 Torque Knob (3)
24 43-54-0710 Pressure Guard (1)
25 43-54-1025 Upper Blade Guard Assembly (1)
26 42-24-0580 Bearing Assy. w/ Hdw. (Sold in sets of 4) (4)
27 40-50-1025 Pressure Guard Spring (1)
28 06-55-1987 5/16"-18 Std. Hex Nut (1)
29 44-66-5960 Right Plate (1)
30 44-66-5970 Left Plate (1)
31 06-10-0650 1/4"-20 x 1" Carriage Bolt (8)
32 06-57-4510 1/4"-20 Nylock Hex Nut (10)
33 44-20-0270 Rip Lock Assembly (1)
34 43-98-0420 Rip Lock Knob (1)
35 06-75-0357 5/16"-18 x 4" Hex Hd. Cap Bolt (1)
36 06-75-0335 5/16"-18 x 1-1/2" Sk. Hd. Cap Bolt (1)
37 44-66-5980 Mounting Plate (1)
38 06-75-0080 1/4"-20 x 1/2" Hex Hd. Cap Bolt (9)
39 06-75-0076 1/4"-20 x 3/8" Hex Hd. Cap Bolt (1)
40 44-60-1330 Index Pin Assembly (1)
41 43-98-0430 Index Pin Knob (1)
42 43-56-0480 Rip Ruler Guide (1)
43 06-12-0010 1/4"-20 x 2-1/4" Eye Bolt (2)
44 43-82-0130 Vertical Indicator (Scale) (1)
45 06-55-1515 1/4"-20 Heavy Hex Nut (3)
46 43-82-0120 Horizontal Indicator (Scale) (2)
6480-20
54-40-0825
697A
PANEL SAW
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
REVISED BULLETIN
DATE
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
CATALOG NO.
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
STARTING
SERIAL NUMBER
Mar. 2002
0
0
0
FIG. PART NO. DESCRIPTION OF PART QTY.
47 43-72-0200 Holder (2)
48 44-96-0140 RED - Original Equipment Roller (8)
44-96-0160 CLEAR - HD Replacement Roller (8)
49 45-88-8460 5/16" I.D. Washer (4)
51 06-08-0040 Hardware Kit (Roller) (8)
53 42-24-0560 End Bearing (2)
54 42-24-0570 Cam Bearing (6)
55 44-66-5990 Face Plate (2)
56 42-36-1750 Support Bracket (2)
57 06-75-0494 3/8"-16 x 5/8" Hex Hd. Cap Bolt (2)
58 6486-20 8" Motor (1)
60 06-08-0075 Rear Bolt (1)
61 45-36-0070 Mounting Spacer (1)
62 06-57-0015 Rear Nut (1)
63 45-88-0675 Front Mounting Washer (2)
64 06-57-0010 Front Mounting Nut (2)
65 45-88-0670 Rear Washer (1)
66 06-85-0010 Jack Screw (1)
12-20-0196 Nameplate Kit (not shown) (1)
FIG. NOTE:
51 Torque to 200 in./lbs. minimum
10 Apply Tefl on dry spray lubricant to guide tube rails
See Bulletin No. 54-40-0451
for the following Panel Saw Accessories:
Hold Down Bar Kit
No. 49-22-8100
Quick Stop Kit
49-22-8102
Dust Collection Kit
49-22-8105
Wheel Kit
49-22-8106
Extension Kit
49-22-8108
Midway Fence Kit
49-22-8110