Replacement Part List

8c
8b
8a
10
11
8g
12a
5
12b
6e
6d
6c
7
6b
5(4x)
4(4x)
6a
2
1
8d
8e
9(4x) 8f
14
15a
18d
13a
13b
15b
23d
23c
23b
23a
18c 18b(4x) 18a
21
25
3
19
18a 18b
18c 18d
18
12a 12b
5
12
Rotor Holding Service Fixture
Cat. No. 61-30-0050
(For use in a vise)
Use as an aid for
the removal of the
M5 Hex Nut #10
from the rotor spindle
while preventing
damage to Rotor #13b.
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
0
00
*LUBRICATION NOTE:
When servicing the Gears
(6e & 11) or Gearcase (8d),
90-95% of old grease must
be removed prior to new
grease being added.
FIG. LUBRICATION*
6e,11 Type "Y" Grease,
No. 49-08-5270,
Must Be Applied To
All Gear Teeth.
8d Place 19g ± 0.5
(approx. 5/8 oz) of
“Y” grease in gear
cavity of gearase.
10
11
13b
13a
13b
13
15a
15b
15
23a 23b
23c 23d
23
8a 8b 8c 8d
8e 8f 8g
8
6a 6b 6c
6d 6e
6
22
26b 26c
26e 26f
26
M18 FUEL™ Braking Grinder w/ Paddle Switch & Lock-Off
2783-20
G48A
54-38-7020
SEE PAGE 2
July 2015
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 05-59-0015 5/8"-11 Fixtec Nut 1
2 43-34-0935 Flange Disc 1
3 14-32-0215 5" Type 27 Guard Assy. (Shown, Standard) 1
3 14-32-0210 4.5" Type 27 Guard Assy. (Optional) 1
4 05-88-1210 M4 x 14mm Pan Hd. T-20 Screw 4
5 05-90-0225 Spring Washer 6
6 14-73-0310 5/8"-11 Spindle Hub Assembly 1
6a --------------- 5/8"-11 Spindle Shaft 1
6b --------------- Spindle Hub 1
6c --------------- Ball Bearing 1
6d --------------- Retaining Ring 1
6e --------------- Bevel Gear 1
7 34-40-0180 O-Ring 1
8 14-30-0160 Gearcase Assembly 1
8a --------------- Needle Bearing 1
8b --------------- Spindle Lock Pin 1
8c --------------- O-Ring 1
8d --------------- Gearcase 1
8e --------------- Spindle Lock Spring 1
8f --------------- Spindle Lock Button 1
8g --------------- Ball Bearing 1
9 05-88-1300 M4 x 28mm Pan Hd. ST T-20 Screw 4
10 05-55-0620 M5 Hex Nut 1
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 1
STARTING
SERIAL NO.
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
11 32-60-0165 Pinion Gear 1
12 44-86-0195 Bearing Retaining Plate Assembly 1
12a 44-66-0450 Bearing Retainer 1
12b 05-88-1280 M4 x 10mm Pan Hd. T-20 Screw 2
13 42-14-0040 Baffl e Assembly 1
13a --------------- Fan Baffl e 1
13b --------------- Fan Baffl e Foot 1
14 45-88-0406 Washer 1
15 16-07-2690 Rotor Assembly 1
15a --------------- Rotor 1
15b 02-04-0033 Ball Bearing 1
18 31-44-1415 Housing Kit 1
18a 06-82-7236 4-20 x 5/8" Pan Hd. Plastite T-10 Screw 1
18b 05-88-1200 M4 x 16mm Pan Hd. Plastite T-20 Screw 4
18c --------------- Housing Cover - Right Housing Halve 1
18d --------------- Housing Support - Left Housing Halve 1
19 14-20-2783 Electronics Assembly
Consisting of: Stator, Switch, PCBA and
Battery Terminal Connector Block 1
21 31-15-0275 Dust Cover 1
22 43-84-0205 Logo Plate 1
23 14-78-0530 Paddle Trigger Assembly 1
23a --------------- Lock-Off Lever 1
23b --------------- Lock-Off Spring 1
23c --------------- Lock-Off Pin 1
23d --------------- Paddle Trigger 1
25 42-62-0125 Side Handle Assembly 1
26 14-46-0097 Spindle Lock Kit 1
27 12-20-2685 Service Nameplate (Not Shown) 1
56 42-55-2683 Blow Molded Carrying Case 1
NOTE:
When replacing bevel gear #6e because of damage, it is important
to inspect the mating pinion gear #11 for damage also.
It is recommended that gears be replaced in sets.
56