Service Parts List S/N H59A

EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
00
REVISED BULLETIN DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
SERVICE PARTS LIST
WIRING INSTRUCTION
54-05-2770
May 2018
BULLETIN NO.
H59A
STARTING
SERIAL NO.
2771-20
CATALOG NO.
M18™ TRANSFER PUMP
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 06-82-0048 M5 x 30 Screw Kit (Set of 4) (1)
2 14-38-0018 Impeller Window Kit (1)
3 --------------- Front Cover (1)
4 --------------- Lens (1)
5 --------------- Window (1)
6 49-16-2771 Flexible Impeller Kit w/ Grease (1)
7 --------------- O-Ring (1)
8 --------------- Impeller (1)
9 43-33-0026 Brass Fitting 1/2" NPT x 3/4" GHT (2)
10 31-21-0021 Battery Door Kit (1)
11 --------------- Battery Door (1)
12 --------------- Battery Door Pin (1)
13 12-20-0083 Service Nameplate (Not Shown) (1)
1
2
1 3
4 5
6
7
8
3
4
5
7
8
9
10
11
12
11
12
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 4
FIG. NOTES
 9 Thebrassttingsareastandardsizeandshouldbeavailableto
purchase at most hardware stores.
13 A clean, dry surface is essential for proper performance for any
adhesive system. The area intended for application of any adhesive
label or nameplate must be prepared by cleaning with isopropyl
alcohol. The solvent is to be applied with a clean, lint free applicator
and the surface allowed to dry before applying the label or name
plate.
NOTE:
Clean internal and external
threads with wire brush before
puttingnewttingsin.Teon
tape is recommended to seal
thenewttingsinplace.
NOTE:
Model 2771-20 M18™ TRANSFER PUMP (Serial Break 'A')
is designed to operate o󰀨 of several di󰀨erent M18 RED-
LITHIUM™ battery sizes from 1.5 amp-hours to 9.0 amp-
hours.
To power a 2771-20 M18™ TRANSFER PUMP (Serial Break
'A') with a 48-11-1812 M18™ REDLITHIUM™ 12.0 amp-
hour battery, 12.0 Upgrade Service Kit 14-46-0089 must be
ordered to accomodate the larger size battery.