Service Parts List S/N J49A

EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
00
REVISED BULLETIN DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
SERVICE PARTS LIST
WIRING INSTRUCTION
54-38-2600
Nov. 2017
BULLETIN NO.
J49A
STARTING
SERIAL NO.
2648-20
CATALOG NO.
M18™ RANDOM ORBIT SANDER
See Page 2
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 1
FIG. NOTES
37,38 A clean, dry surface is essential for proper performance for any ad-
hesive system. Area intended for application of any adhesive label
or nameplate must be prepared by cleaning with isopropyl alcohol.
The solvent is to be applied with a clean, lint free applicator and the
surface allowed to dry before applying the label or nameplate.
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 06-82-0053 M2.6 x 8mm Pan Hd. Tapt. Tamper Proof T-8 Scr. (2)
2 44-66-0001 Speed Dial Holding Plate (1)
3 44-10-0001 Switch Lever (1)
4 14-20-0001 Electronics Assembly (1)
4a --------------- Speed Dial (1)
5 43-72-0001 Switch Holder (1)
6 40-50-1090 Compression Spring (1)
10 --------------- Right Housing Halve - Cover (1)
12 45-30-0001 Silicone Slug (4)
13 --------------- Left Housing Halve - Support (1)
18 42-25-0001 Drive Belt (1)
20 22-84-0980 Fan/Counter Balance (1)
23 06-81-0165 #8-32 Washer Hd. T-20 Machine Screw (1)
24 44-52-0970 Brake (1)
25 51-36-7100 5" Disc Assembly (Hook & Loop) - Standard (1)
51-36-7095 5" Disc Assembly (PSA) - Optional (1)
26 06-81-0160 10-32 x 1/4" Pan Hd. T-25 Screw (4)
27 --------------- 5" 80 Grit Sand Paper (Hook & Loop) - Std. (3)
--------------- 5" 80 Grit Sand Paper (PSA) - Optional (1)
28 06-81-0145 8-18 x 5/8" Pan Hd. DT T-15 Screw (5)
29 --------------- Dust Box Cover with Gasket (1)
30 --------------- Dust Box Filter (1)
31 --------------- Screw (4)
32 --------------- Dust Box Body (1)
33 31-03-0001 Extension Adapter (1)
35 31-03-0003 Vacuum Adapter (1)
36 12-20-0121 Service Nameplate (1)
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
37 45-30-0002 Silicone Slug (2)
38 10-20-0239 Warning Label (1)
40 14-34-0001 Housing Kit (1)
41 02-04-0043 Bearing Assembly (1)
42 14-50-0001 Motor/Pulley/Shaft Assembly (1)
43 31-15-0001 Dust Box Assembly (1)
SCREW TORQUE SPECIFICATIONS
SEAT TORQUE
FIG. PART NO. WHERE USED (KG/CM) (IN/LBS)
1 06-82-0053 Dial Holding Plate 4±1 3.4±1
23 06-81-0165 Spindle 25±3 21.6±2
26 06-81-0160 Disc Assembly 21±3 18.2±2
28 06-81-0145 Housing Halves 12±3 10.4±2
31 --------------- Dust Box Filter 2.5±1 2.1±1
37
(2x)
29
35
30
33
31
(4x)
32
10
38
36
28
(5x)
24
25
26
(4x)
27
6
18
20
41
23
12
(2x)
3
4a
2
1
(2x)
5
13
42
12
(2x)
4
4a
40
10 12 13
36 37 38
43
29 30
31 32
10 13
12
(4x)
37
(2x)
Placement of Silicone Slugs (12 & 37)
in Housing Halves (10 and 13)