Service Parts List

MILWAUKEE TOOL l www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, WI 53005
Drwg. 2
BULLETIN NO.
54-05-0180
SERVICE PARTS LIST
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 45-12-0085 Rubber Boot (1)
2 34-80-0040 Retaining Ring (1)
3 45-22-0475 Sliding Sleeve (1)
4 02-02-0055 Detent Ball (3)
5 40-50-1195 Quick Connect Spring (1)
6 --------------- Quick Connect Housing (1)
7 34-40-0460 O-Ring (1)
11 34-40-0455 O-Ring (1)
21 45-30-0255 Rubber Slug (12)
22 --------------- Housing Cover (Left Housing Halve) (1)
23 06-82-1080 M3 x 14mm Pan Hd. ST T-10 Screw (15)
24 12-20-2502 Service Nameplate (1)
27 43-75-0065 Rubber Hose (Long) (1)
28 --------------- Quick Connector (1)
29 06-82-0215 Pan Hd. ST Phillips Screw (1)
30 34-60-0155 Slip Ring (1)
31 --------------- Pressure Gauge Body Assembly (1)
32 --------------- Contact Plate (1)
33 --------------- Pressure Gauge Rotating Dial Cover (1)
34 --------------- Pressure Gauge Lens (1)
35 42-04-0030 Quick Connector (2)
36 43-75-0060 Rubber Hose (Short) (1)
37 --------------- Rocker Pin (1)
38 --------------- Connector Pin (1)
39 --------------- Connector Pin (1)
40 --------------- Trigger Rocker (1)
41 --------------- Trigger (1)
42 42-70-0525 E-Ring (2)
44 31-01-0235 Fuel Gauge Light Pipe (1)
45 --------------- Housing Support (Right Housing Halve) (1)
50 05-74-0005 Hex Socket Cap Hd. Machine Screw (4)
52 34-40-0400 O-Ring (1)
53 42-98-0070 Compressor Cylinder (1)
54 06-82-5574 10-24 x .875 Pan Hd. Tapt. T-25 Screw (4)
55 --------------- End Plate (1)
56 42-88-0070 Counter Balance (1)
57 --------------- Gear Case Bushing (1)
58 --------------- Gear Case Cover (1)
CATALOG NO. 2572-20
REVISED BULLETIN
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
M12™ AIRSNAKE™ Power Plunger
STARTING
SERIAL NO.
DATE
Mar. 2018
WIRING INSTRUCTION
H94A
See Page Three
FIG. NOTES
24 A clean, dry surface is essential for proper performance for any
adhesive system. The area intended for application of any ad-
hesive label or nameplate must be prepared by cleaning with
isopropyl alcohol. The solvent is to be applied with a clean, lint
free applicator and the surface allowed to dry before applying
the label or nameplate.
59,90 Press the press ring onto drive pin of gear assembly. Press
ush to the end of pin.
91
2
3
5
6
4
(3x)
7
1
35
(2x)
29
40
42
(2x)
41
38
37
39
36
52
50
(4x)
21
(12x)
53
90
44
28
30
32
31
33
34
27
45
54
(4x)
55
56
57
58
59
60
63
62
64
66
(2x)
22
23
(15x)
61
(2x)
24
81
SEE PAGE 2 FOR A COMPLETE LISTING OF
PLUNGER ATTACHMENTS & ACCESSORIES
56
82
90
Pin of Gear Assembly 59
89
61
81
82
11
83
32 33
34
85
28 31 32
33 34
80
52
87
21 22 23
24 45
84
37 38 39
40 41 42
86
54 55 56 57 58 59
60 62 63 64 66 90
Rubber Slugs (21)
6x per housing halve
total of 12
88
2 3 4 5 6
7 11 35
91
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
59 --------------- Gear Assembly (1)
60 --------------- Pin (1)
61 06-82-0210 M3 x 14mm Pan Hd. Phillips Screw (2)
62 --------------- Gear Case (1)
63 --------------- Ball Bearing (1)
64 34-60-0170 Retaining Ring (1)
66 06-82-0205 M3 x 6mm Pan Washer Hd. Tapt. Screw (2)
80 43-64-0015 Cylinder Head Assembly (1)
81 --------------- Motor and Pinion Assembly (1)
82 44-62-0235 Piston Assembly (1)
83 42-92-0205 Pressure Gauge Cover Assembly (1)
84 45-72-0050 Trigger and Rocker Assembly (1)
85 43-46-0025 Pressure Gauge Assembly (1)
86 14-30-0320 Gear Box Assembly (1)
87 31-44-2575 Housing Halve Assembly (1)
88 45-66-0075 Tank Assembly (1)
89 14-20-0410 Electronics and Motor Assembly (1)
90 44-86-2572 Press Ring (1)
91 44-52-0405 Rubber Pad (1)
IMPORTANT!
DO NOT attempt to
disassemble the Tank
Assembly (88).