Service Parts List

2571-20
M12™ DRAIN SNAKE
June 2019
54-07-2570
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
CATALOG NO.
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
SERIAL
NUMBER
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 3
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
00
H23A
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 44-90-0265 C-Ring (2)
2 42-36-0240 Spring Plate (2)
3 05-81-0060 M5 x 0.8 Pan Hd. Philips Screw (4)
4 --------------- Drum Cover (1)
5 43-44-0045 Foam Gasket (1)
6 43-11-0085 Inner Drum (Drum Only) (1)
7 05-74-0115 M5 x 0.8 Pan Hd. T-25 Screw (Left Hand) (1)
8 45-88-2045 Washer (1)
9 14-46-2571 Drum Support Kit (1)
10 --------------- Drum Shroud (1)
11 12-20-2570 Service Nameplate (Not Shown) (1)
12 06-82-1080 M3 x 14 ST Housing Screw (15)
13 --------------- Right Handle (1)
14 45-88-2055 Washer (1)
17 06-82-7261 6-19 x .687 Pan Hd. Slt. Plast. T-15 Screw (3)
18 --------------- Gear Case Assy. (1)
27 --------------- Motor (1)
29 --------------- Motor Mount Plate (1)
30 --------------- M3 x 0.5 T-10 Screw (2)
31 06-65-0502 M2.5 x 37mm Steel Pin (2)
32 22-09-0120 Fuel Gauge Lens (1)
 33 42-42-0360 Forward/Reverse/LockO󰀨Shuttle (1)
35 14-20-2005 Electronics Assy. (1)
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
37 --------------- Left Handle w/ Fuel Gauge Label (1)
41 31-15-0395 Front Handle Cover (1)
42 31-42-0015 Bucket Insert (1)
43 42-51-0010 Bucket (1)
50 43-54-0205 Front Handle Assy. w/ Bushing and
Retaining Rings (1)
51 31-15-0415 Drum Cover Assy. (1)
52 31-55-0010 Drum Shroud Assy. (1)
53 31-44-1045 Handle Assy. (1)
54 14-30-1015 Gear Case Assy. (1)
55 14-50-0010 Motor Assy. (1)
48-53-2571 5/16" x 25' Bulb Cable (1)
48-53-2572 5/16" x 25' Drop Head Cable (1)
48-53-2573 1/4" x 25' Bulb Cable (1)
48-53-2574 1/4" x 25' Drop Head Cable (1)
48-53-2581 Inner Drum w/ 5/16" x 25' Bulb Cable Assy. (1)
48-53-2582 Inner Drum w/ 5/16" x 25' Drop Head Cable Assy. (1)
48-53-2583 Inner Drum w/ 1/4" x 25' Bulb Cable Assy. (1)
48-53-2584 Inner Drum w/ 1/4" x 25' Drop Head Cable Assy. (1)
FIG. NOTES
5 The gasket comes as a strip and has to be formed
intothecircleconguration.
6 The cable is under pressure and can uncoil
unexpectedly. Keep pressure on the cable when
removing the drum cover.
9 To remove the drum support, hold the drum support
stationary with hand while removing the T-25 screw
(7) and washer (8). Then insert a T-40 screw-
driver into the support shaft. Spin the drum support
o󰀨byhandwhileholdingthesupportshaft
stationary with the screwdriver.
35 For ease of installing electronics, place blocks
of wood under the handle to support the tool.
54 The motor mount (29) comes with the assembly
to hold the parts together. It can be discarded if
a new mount is not needed.
50
1
1
41
2
3 (4x)
4
5
6
7
8
9
10
17
12 (15x)
37
32
35
33
27
14
29
30
31
13
18
4
5
51
10
11
52
13
37
53
27 29
30
55
18 29
31
54
42
43