Service Parts List S/N L60A

REVISED BULLETIN
SERVICE PARTS
BULLETIN NO.
STARTING
SERIAL NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, WI 53005
Drwg. 2
104
103
93
76
(x9)
92
13
(x4)
13
(x2)
97
91
94
(x2)
95
(x2)
88
(x2)
1
(x2)
22
90
89
96
4
(x4)
89
(x2)
13
(x4)
105
13 103
104
115
1 13 22 76
92 93 97
116
89 90 94
95 96
106
13 103
104
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 05-87-0016 Self Tapping Screw (2)
4 05-87-0017 M3.5 x 20mm ST Phillps Screw (4)
13 05-87-0014 M3 x 12mm ST Phillips Screw (10)
22 23-94-0248 Wire Holder (1)
76 05-87-0019 M3.5 x 12mm ST Phillips Screw (9)
88 22-68-0079 Light Head Base Bottom Cover (2)
89 45-88-0202 Washer (3)
90 28-06-0036 Light Head Base (1)
91 43-72-0081 Light Head Holder (1)
92 22-68-0080 Light Head Bottom Cover (1)
93 22-68-0081 Light Head Top Cover (1)
94 05-74-0066 Anti-Loose Screw (2)
95 45-88-0346 Wave Washer (2)
96 06-75-0006 M6 Hex Socket Machine Screw (1)
97 22-09-0032 Light Head Board (1)
103 44-06-0082 LED Lens (1)
104 22-68-0077 LED Lens Cover (1)
105 14-20-0190 Light Head Assembly w/ Four Wires (1)
106 14-20-0191 Light Head Assembly w/ Two Wires (2)
115 22-09-0027 Light Head Cover Kit (1)
116 42-52-0505 LED Mounting Cap w/ Washers and Screws (1)
54-06-2530
M18™ ROCKET™ LED TOWER LIGHT/CHARGER
2136-20
L60A
Sept. 2020
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
Adjustment
Screws
Adjustments may be
needed to Clamping
Assemblies 84 and 85
to prohibit sliding when latched.
Tighten or loosen adjustment screw
and flip clamp lever to the feel. If
clamping the lever seems too
difficult do not force lever.
Screw should be loosened
slightly and try securing the
lever again. If lever seems too
loose, tighten screw slightly and flip clamp lever to the feel.
Light Head Assemblies come in two di󰀨erent
congurations. Light Head Assembly w/ Two
Wires (106) and Light Head Assembly w/ Four
Wires (105).