Installation & Assembly

WOODEN ADIRONDACK OTTOMAN
Read this manual carefully before assembly and keep it for future reference.
USE & CARE
• Do not sit on the ottoman. This product was designed to be a footrest.
• To clean, wipe down with a damp cloth. Do not power-wash, use harsh chemicals or abrasive materials as it may damage the finish.
• Cover when not in use or store indoors.

STEP 1
NOTE:
KEEP ALL NUTS AND BOLTS
LOOSE DURING ASSEMBLY
C
B
A
1pc
STEP 2
TIGHTEN ALL NUTS,
BOLTS, & SCREWS
LAST
1pc
Nuts & Bolts
2” (50mm)x4pc
10mm Wrench Phillip Screwdriver
Tools Required (not included)
STEP 1
NOTE:
KEEP ALL NUTS AND BOLTS
LOOSE DURING ASSEMBLY
C
B
A
1pc
STEP 2
TIGHTEN ALL NUTS,
BOLTS, & SCREWS
LAST
1pc
Nuts & Bolts
2” (50mm)x4pc
10mm Wrench Phillip Screwdriver
Tools Required (not included)
Step 1 Step 2
IMPORTANT:
• Make sure all parts and hardware are present before assembly.
• Assemble the ottoman on a non-marring surface.
• Do not completely tighten the hardware until the ottoman is fully assembled.
Tools Required (not included)
10mm Wrench Phillips Screwdriver
ASSEMBLY
Keep all nuts and bolts loose
during assembly.
Tighten all nuts and bolts; do not over-tighten as
it may damage the nish and crack the wood.
  
A 1
B 2
C 4
Thank you for choosing us. We stand behind our brand and the quality of the items we sell. Replacement
parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date
of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the
cause of defects and for future quality control.
If you have any questions, comments or concerns, feel free to contact us by phone, email, or via our contact us
page.
Page 1 / 1