User's Manual

Your
Physical
Activity Belt
Eight Step
Guide.
myzone.org
Step 1.
Register your belt at
myzone.org and click on
the “Login to your MYZONE
user account” button once
there click on the “Register
my Belt” button. Further
instructions are provided
on how to register at this
site. Enter the unique
MYZONE Activity Belt ID -
the 10 numbers following
“SN” on the reverse of
the belt module eg SN
0000003074. You will also
need your unique facility
code which you can get
from the person(s) you
received your belt from.
Step 2.
Adjust your belt so that the
across your sternum, with
the MYZONE logo facing
away from your chest. You
can adjust the strap size
using the plastic adjuster.
tight around your body,
ensure it is comfortable.
(image below)
To set your resting heart
rate please wear your belt
for 10 minutes prior starting
need to do this once.
Step 3.
Just prior to concerted
activity it is advised to
moisten the 2 black sensor
tabs on the fabric strap then
connect the plastic module
onto the fabric strap, you
the belt is on.
Step 4.
While you’re wearing your
belt, your data will upload
into your account when you
ar e in range of a MYZONE
Console. This range will
di ffer from location to
location.
If you have exercised away
from the facility where
you received your belt,
your data will store on the
memory chip. The memory
chip will store a total of 16
hours of activity.
Model:BELT
Step 5.
Each time you return to the
facility where you received
your belt, your stored data
will upload to your online
account as long as you are
wearing your belt or holding
the belt between your
thumbs (image below) and
are within 10 metres of the
MYZONE Console.
Step 6.
When uploading, the
MYZONE Console will
display the status of your
upload.
A green tick indicates that
your upload was successful
and is now available to view
in your account.
The red rotating MYZONE
pulse indicates that your
exercise data is currently
uploading to the cloud.
Please don’t walk away.
The blue cross prompts
you that communication
between the Console and
your belt has disconnected
prior to a complete upload.
Please try again.