MWC711 User Manual MWC711 User Manual 60GHz RF/BB Module with USB3.0 interface Rev. 1.
MWC711 User Manual Revision History Date Written by Rev. Description 20.03.16 Ken. Jung 1.0 MWC711 User manual .1.0 Release 20.03.24 Ken. Jung 1.1 MWC711 User manual .1.1 Release Address: 423 R&DB Center, 105 YoungTong-Gu, SuWon-Si, GyeongGi-Do, 16229 Korea http://www.miliwave.co.kr/ Tel. 070-8825-0630 Fax. Email: sales@miliwave.co.kr Copyright © Miliwave Inc. 2020. All rights reserved.
MWC711 User Manual 1.Introduction 1.1 Overview Miliwave’s MWC711 module operates in the 60GHz unlicensed frequency band, IEEE802.11ad compliant, and is designed for Point to Multi-Pont (PTMP) or Point to Point (PTP) bridge wireless communication, primarily for Line-of Sight (LOS) operation.The MWC711 module connects to a Linux based Host Communication Processor board via an available USB 3.0 port . All required drivers and firmware is pre-installed on the MWC711 module as a self-contained device .
MWC711 User Manual 1.3 MWC711 Module Description The Miliwave's MWC711 module in conjunction with the Host Communication Processor board can function as a PTP or PTMP bridge communication . Main chracteristics of the MWC711 module include: - Adaptive Modulation and Link Adaptation: Up to 16QAM and MCS1-12 support Integrated Phased Array Planar Antena: EIRP 31dBm, 120 degree beam sweep range Advanced Security: AES-128 Compact Form Factor: 35 x 45 x 20mm Connectivity: USB 3.0 type B, 60GHz wireless 2.
MWC711 User Manual 7.0 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
