BC ○ TABLET COMPUTER DR13 USER’S GUIDE (Preliminary Version)
Notice Copyright© 2019, MilDef Crete Inc. All rights reserved. No part of this publication may be reproduced and modified without the written permission of MilDef Crete Inc. MilDef Crete Inc. reserves the right to make changes in the products or the product specifications without any prior notice. Customers are advised to contact MilDef Crete Inc. for updated product information. MilDef Crete Inc.
Radiation Exposure Statement This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
FCC (Federal Communications Commission) regulatory compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
CE Declaration of Conformity It is confirmed to comply with the requirements set out in the Council Directive on the approximation of the laws of the member states relating to Electromagnetic Compatibility (2004/108/EC), Low-voltage Directive (2006/95/EC), the Amendment Directive (93/68/EEC), and the procedures given in European Council Directive (99/5/EC and 2004/108/EC ). The equipment was passed, and the equipment test was performed according to the following European standards: EN 300 328 V1.8.
Power Conservation This tablet computer consumes less power compared to conventional consumer computers. The power consumption may be further reduced by properly configuring the Power Management Setup. It is recommended that the power saving features be enabled even when not running on battery power. Power Management features can conserve power without degrading system performance.
Battery Preservation Precaution Only use batteries designed for this computer. Using incompatible battery types may cause explosion, leakage or damage to the computer. Do not store your battery in high moisture condition, low temperature or high temperature. Proper storage temperature is 5~20°C and capacity is suggested to remain 50%. Do not put your computer and battery near any heat source(oven, stove…). Do not remove the battery from the computer while the computer is powered on.
short time. Battery protection If a battery keeps being charged with high voltage, the cell would age faster. To prevent this, once the battery is charged to 100%, the system will not keep charging it and the capacity might decrease and remain between 90~100%. Notice: For safety, recharging will stop if the internal temperature of the battery is out of range(<0°C; >50°C).
Environmental Information, Material Safety & Recycling All materials used in the manufacturing of this equipment are recyclable or environmentally friendly. Please recycle the packing materials in accordance with local regulations at the end of the product's service life. Notice: The equipment may contain insignificant amount of hazardous substances for health and environment below control level.
TABLE OF CONTENTS CHAPTER 1 - GETTING STARTED .............................................................. 1 UNPACKING .................................................................................................................. 1 APPEARANCE OVERVIEW ............................................................................................... 2 CHAPTER2 - OPERATING INFORMATION ................................................. 6 START USING YOUR TABLET COMPUTER .....................................
STORAGE ................................................................................................................... 30 AUDIO ........................................................................................................................ 31 I/O PORTS .................................................................................................................. 31 CASE .........................................................................................................................
Getting Started Chapter 1 - Getting Started Unpacking The following components come with your computer. If anything is missing or damaged, please notify the dealer immediately.
Getting Started Appearance Overview Front 1. 2. 3. Touch Screen Optional Wi-Fi/Bluetooth Antenna LED Indicators 4. Function Keys Icon F1 F2 F3 F4 Tab - Esc Ctrl ↓ Alt ↑ Del Function Icon Function Function Lock + ← → Enter Brightness Down Brightness Up Note: To prevent wrongly trigger, do not press any function buttons when using keyboard.
Getting Started Rear 1. 2nd Battery Connector Left 2. Battery Slot 3. GLAN x 1 4. USB 3.1 Type A x 2 5. SD Card Slot x1 6. SIM Card Slot x1 7.
Getting Started Right 1. DC-In x 1 2. COM x 1 Top 1. SSD slot 2. Optional GPS Antenna 3.
Getting Started Bottom 1.
Operating Information Chapter2 - Operating Information Start Using Your Tablet Computer Always turn on your tablet computer by using the power button. Press the power button about 2 seconds and the tablet will boot up. This is the standard operating procedure to start using your tablet computer. After turning on the power of your tablet computer, it will start with the Operating System (OS) installed. Boot Up When you turn on the power, your computer will start to load the OS into the system memory.
Operating Information Stop Using Your Tablet Computer Each time when you finish working with your tablet computer, there are several ways to stop your tablet computer from operating. Shut down Directly click “Shut down” from your OS to turn OFF the power of your computer. Before shutting down, please do remember to save unfinished works and close your applications to prevent your SSD from suffering possible data loss or damage. “Shut down” will turn OFF power of your computer.
Operating Information Installing Operating System Your computer is designed to operate with Microsoft Windows 10 / 64-bit Operating System. Please connect your computer with an external USB-interface drive to start the OS installation. Note: A USB hub may be required during installation to connect with an external USB-interface ODD, as the System USB port may not supply enough power. Please connect your USB hub with extra power supply to complete the installation.
Operating Information Input Lock key To prevent from unexpected input by buttons and touch screen, you can press Input Lock key. When Input Lock function is on, the input from devices including buttons and touch screen will be locked. To cancel the input lock function, just press the Input Lock key again and the indicator will be turned off. System Manager System Manager is an app which allows user to access information(System, battery ),and set RF device, function keys easily. 1.
Operating Information 2. Battery information: 3.
Operating Information 4. Function key control panel. Available Function Items List None Open/ Execute a selected file Open URL in default browser Change display output Brightness up Brightness down Volume up Volume down Volume mute Launch on-screen keyboard Launch Windows Mobility Center Launch File Explorer Note: “System manager” is a universal app so some pages may be different according to your system.
Managing Power Chapter3- Managing Power AC Adapter The AC adapter performs two functions: - It powers the computer from an external AC source. - It charges the computer battery. The adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. The following are recommended when using the AC adapter: - Use a properly grounded AC outlet. - Use one AC outlet exclusively for the computer. Having other appliances on the same line may cause interference.
Managing Power Battery The computer will automatically switch to battery when the external power source (AC adapter or optional vehicle adapter) is disconnected. Battery Power Saving Tips The computer comes with an intelligent power-saving feature. You may extend the battery life by: Setup power saving functions in Operating System Power Management options (e.g. Windows Power Options). Lower the intensity of the display by brightness control.
Managing Power Battery Level You may check battery status from Operating System. In Windows, you can click the power/battery icon to reveal the battery gauge window. The following is the illustration of Battery Gauge in Windows OS. Note: Battery characteristic varies depending on factors such as ambient temperature, charging method, load current, aging, etc. For example, the chemicals of the battery are more inactive at low temperature, thus decreases the output power.
Managing Power Battery Recalibration Battery recalibration allows users to maintain the battery in a healthy condition. To perform battery recalibration, please follow the steps as below: 1. Update BIOS & EC to the latest version. 2. Insert the battery to the computer, and connect it to AC adapter. 3. Enter the BIOS => Choose “Advanced menu” => Choose “Battery Recalibration” => Press “Enter”. 4. When the “Start Battery Recalibration” pop-up appears, press “Yes” to continue.
Managing Power ACPI Support Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. With ACPI and an ACPI-compliant operating system (such as Microsoft Windows), this feature will allow you to reduce the power consumption and conserve energy. By supporting ACPI, the AC adapter LED and the Power indicator LED will show in different ways.
Optional Devices BIOS Setup Chapter 4 - BIOS Setup Press [F2] at boot up to enter BIOS setup. Use arrow keys to select options and [+/-] to modify them. When finished, move to “Exit” and press [Enter] then confirm save by pressing [Y].
Optional Devices BIOS Setup Advanced Menu Main Advanced Aptio Setup Utility Chipset Boot ► PCH-FW Configuration ► Platform Settings ► Realtek PCIe GBE Family Controller(MAC:_____) ► Intel® Ethernet Connection I219-LM-(MAC:_____) ► Trusted Computing ► RF Device Control ► EC Thermal Control ► AC In boot Control ► USB CHARGE Control ► Battery Recalibration ► IT8760 Super IO Configuration ► Network Stack onfiguration ► CSM Configuration Security Save & Exit Configure Gigabit Ethernet device parameters →
Optional Devices BIOS Setup Feature Options Description Network Stack Configuration Disabled Enabled Enable / Disable UEFI Network Stack CSM Configuration Disabled Enabled Enable / Disable CSM support PCH-FW Configuration Sub-Menu Aptio Setup Utility Advanced Configure Management Engine Technology Parameters ME FW Version ME Firmware Mode ME Firmware Type ME Firmware SKU Firmware Update Congiguration →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt.
Optional Devices BIOS Setup Realtek PCIe GBE Family Controller Aptio Setup Utility Advanced Driver Information Driver Name: Driver version: Driver Released Date: →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt.
Optional Devices BIOS Setup Trusted Computing Sub-Menu Aptio Setup Utility Advanced Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. TPM20 Device Found Security Device Support Pending operation →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt.
Optional Devices BIOS Setup AC In Boot Control Sub-Menu Aptio Setup Utility Advanced AC In Boot Setting AC In Boot AC In Boot Control [Disabled] USB CHARGE Control Sub-Menu Aptio Setup Utility Advanced USB CHARGE Setting USB CHARGE USB CHARGE Control [Disabled] →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt.
Optional Devices BIOS Setup Battery Recalibration Sub-Menu Aptio Setup Utility Advanced Start Battery recalibration function Battery Recalibration Utility *For Main Battery Only! Calibration Frequency Battery Capacity Battery Charge Mode Battery Learning Mode →←: Note: For Primary battery (left hand side) only, while the Utility is executing, please remove secondary battery (right hand side) and don’t close the LCD and don’t disconnect the AC adapter.
Optional Devices BIOS Setup Network Stack Configuration Sub-Menu Aptio Setup Utility Advanced Network Stack Enable/Disable Network Stack [Disabled] UEFI →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit CSM Configuration Sub-Menu Aptio Setup Utility Advanced Compatibility Support Module Configuration CSM Support Enable/Disable CSM Support.
Optional Devices BIOS Setup Chipset Menu Main Advanced Aptio Setup Utility Chipset Boot Security Save & Exit PCH Parameters ► PCH-IO Configuration →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit PCH-IO Configuration Sub-Menu Aptio Setup Utility Chipset Intel PCH RC Version Intel PCH SKU Name Intel PCH Rev ID PCH LAN Controller Wake on LAN 2.1.0.
Optional Devices BIOS Setup Security Menu Main Advanced Aptio Setup Utility Chipset Boot Security Set Password Password Description If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.
Optional Devices BIOS Setup Setting Password 1. 2. 3. 4. 5. Once you set HDD passwords successfully, you must enter user password to boot in the future. The master password provides an alternative entry in case the user password is lost. Clearing the master password in BIOS setup will also clear the current user password. Master password is used as a backup key, it’s better not to be changed frequently. You can set your master password and user password with a length between 1 and 32 characters.
Optional Devices BIOS Setup Boot Menu Main Advanced Aptio Setup Utility Chipset Boot Security Save & Exit Set the system boot order. Boot Option Priorities Boot Option #1 [Windows Boot Manager (P1: XXXXXXXX) ] →←: Select Screen ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit The system will try to boot from device on top then the 2nd and so on.
Optional Devices Drivers and Applications Chapter 5 – Drivers and Applications The Utility DVD includes all the drivers for the devices installed in your tablet computer. Please consult your dealer if there are any driver missing. Also, you could update the driver or check if there any driver need to be installed by "Windows device manager". Please check the ”readme.
Specifications Chapter 6 – Specifications Platform Intel® Kaby Lake-U Platform CPU Intel® 7th Generation Dual Core™ i7-7600U Processor (4M Cache, up to 3.60 GHz) Memory 16GB System Memory Industrial grade DDR4 2133MHz Touch Screen • • • • • • Type: 8.4” XGA Resolution: 1024 x 768 pixels Brightness(min.~typ.
Specifications Audio HD Audio and mono Speakers Embedded Digital Mic I/O Ports Left: GLAN*1 USB3.1 Gen.
Specifications Case Magnesium Color: Black, NATO Green Dimensions and Weight Dimensions (mm): 250 (L) x 190(W) x 45.2(H) (w/ bumper) Weight: 2.3kg (With battery) Note: Weight varies depending on system configurations. Power Primary Battery: Type: Capacity: Dimensions: Weight: Optional 2nd Battery: Type: Capacity: Dimensions: Weight: 9 x 18650 cells Lithium Ion 10.8V/ 8700mAh 150 mm (W) x 90 mm (D) x 20 mm (H) 460 g (1 lb.
Specifications CE, FCC, WEEE, REACH, RoHS, IP65, MIL-STD-810G, MIL-STD-461G, Optional GA Operating & Storage Temperature Operating Temp.: Std: -20 °C ~ +50 °C Optional: -30 °C ~ +50 °C *Battery Mode at least -10°C Storage Temp.
Optional Devices Chapter 7 – Optional Devices Communication WiFi/Bluetooth: - Intel Dual Band wireless- AC 9260 - Board Form Factor: M.2 2230 E-key Card - Wi-Fi Certified: 802.11 a/b/g/n/ac - Bluetooth: Supports BT 5.0 - Interface: PCIe (WiFi)/USB (BT) GPS: - U-blox M8N (USB interface) Security BIOS password and Kensington cable lock slot are available to safely secure your computer. Optional TPM (Trusted Platform Module) version 2.
Optional Devices Multi-Battery Charger MCDR MCDR provides four slots(Primary*2; Secondary*2), each slot works independently. It takes 4~5 hours to charge a primary battery while charging a secondary battery takes 6~7 hours. The operating temperature ranges from 0 to 45℃.
Chapter 8 – Maintenance and Service Cleaning ALWAYS turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. An air gun is recommended for cleaning water and dust. For salty water please clean with fresh water then blow-dry with an air gun.
RMA Service If troubleshooting solutions are unsuccessful, consult your dealer for RMA. Shipping instructions: 1. Remove any personal add-on devices or other media. 2. Use the original shipping container and packing materials, if possible. 3. If the original packing materials are not available, wrap the equipment with soft material (e.g. PU/PE form) then put the wrapped equipment into a hard cardboard shipping box. 4.
