User's Manual
EN - English -Quick Guide:
This "mANTBox 52 15s" series Quick Guide covers models:RBD22UGS-5HPacD2HnD-15S (mANTBox 52 15s)
This is Wireless Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on for the full up to date user manual. Or scan the QR code with your mobile phone.https://mt.lv/um
Technical specifications, brochures and more info about products at
https://mikrotik.com/pro
Configuration manual for software in your language with additional information can be found athttps://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a consultant https://mikrotik.com/consultants
This Device accepts input of 48V DC 1.2A power adapter, which is provided in the original packaging of this device.This Device can be powered
using DC Jack or PoE injector (Provided in the packaging).
First steps:
Open the upper cover and connect an external antenna.
Open the bottom cover and connect the device to the power source.
Open network connections on your PC, search for MikroTik wireless network and connect to it.
The configuration can be done through the wireless network usinga WinBox configuration toolhttp://mt.lv/winbox.
Download and open "Winbox", choose "Neighbors" to find the device.
Click on the MAC address, user name: admin and there is no password, click Connect.
Download the latest "ARM" packages to your PC .https://mikrotik.com/download
Upload downloaded packages to the Winbox "Files" menu and reboot the device.
In "QuickSet" menu set up the following: Choose your country, to apply country regulation settings.
Set the antenna gain, depending on the antenna used.
Set up your wireless network password in the left field.
Set up your router password in the bottom field.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware and configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures!
This MikroTik equipment complies with the FCC, IC and European Union radiation exposure limits set forth for anExposure to Radio Frequency Radiation:
uncontrolled environment.This MikroTik device should be installed and operated no closer than 25 centimeters from your body, occupational user or the general
public.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
This device needs to be upgraded to RouterOS v6.46 or the latest version to ensure compliance with local authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must beprofessionally installed.