Installation Instructions

ManualsBrandsMikrotikls ManualsElectronicsRBCube-60ad

Table Of Contents

Cube Lite60

The Cube Lite60 is an outdoor wireless router with a built-in directional antenna which works in the 60 GHz

spectrum. It can be used as a CPE to connect to MikroTik devices that work in the 60 GHz spectrum in access

point mode.

Quickstart

• Open the Ethernet door to connect an Ethernet cable to the Ethernet port, connect the other end of the

Ethernet cable to the included PoE injector.

• Plug the PoE injector into your network switch or computer.

• Plug the included power supply into the PoE injector to start up the device.

• Set LAN computer IP configuration to automatic (DHCP).

• Default IP address of the unit is 192.168.88.1, open this address in your web browser to start the

configuration. The username is admin and there is no password.

• We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest

version to ensure the best performance and stability.

• Choose your country, to apply country regulation settings and set up your password in the screen that

loads.

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for

your MikroTik home access point.

1. Scan QR code and choose your preferred OS.

2. Install and open application.

3. By default, IP address and user name will be already entered.

4. Click Connect to establish a connection to your device through a wireless

network.

5. Choose Quick setup and application will guide you through all basic

configuration settings in a couple of easy steps.

6. Advanced menu is available to fully configure all necessary settings.

Configuration

Once logged in, we recommend clicking the “Check for updates” button in the QuickSet menu, as updating your

RouterOS software to the latest version ensures the best performance and stability. For wireless models, please

make sure you have selected the country where the device will be used, to conform with local regulations.

RouterOS includes many configuration options in addition to what is described in this document. We suggest

starting here to get yourself accustomed to the possibilities: http://mt.lv/help. In case IP connection is not available,

the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side

(all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device from the network (see

If the device lose connection, wait for few seconds and then the device will recover connection automatically.

Reset button).

See mikrotik.com/products for the latest version of this document. Page 1, Document #52350 Modified on: 27.SEP.2019

Summary of content (7 pages)

PAGE 1
Cube Lite60 The Cube Lite60 is an outdoor wireless router with a built-in directional antenna which works in the 60 GHz spectrum. It can be used as a CPE to connect to MikroTik devices that work in the 60 GHz spectrum in access point mode. Quickstart • • • • • • • Open the Ethernet door to connect an Ethernet cable to the Ethernet port, connect the other end of the Ethernet cable to the included PoE injector. Plug the PoE injector into your network switch or computer.
PAGE 2
Assembly and mounting The device can be mounted on the vertical or horizontal pole as shown in picture A and B. Please note that a device needs to be mounted with bottom latch facing down. Maximum pole diameter is 51 mm. Mounting and configuration of this device should be done by a certified person. Choose your desired position, the device will require precise adjustment for best performance. 1. Attach provided mount to the back of the device with provided screws using ph0 screwdriver. 2.
PAGE 3
Alternatively, the device can be mounted on one of the three mounting slots on the backside of the device. • • • • • You can use a metal ring for example. Use a Phillips screwdriver to loosen the metal ring. Slide one end of it through the most convenient of the three mounting slots. Position the device on the pole where it will be mounted. Slide the loose end of the mounting ring back to its closing latch and use the screwdriver to tighten it.
PAGE 4
Powering The Cube Lite60 accepts DC ⎓ power from Passive PoE injectors (one power supply and PoE injector are included) accepts 12-28 V DC ⎓ consuming at maximum load 4 W. Connecting to a PoE Adapter: 1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter. 2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter. 3. Connect the power cord to the adapter, and then plug the power cord into a power outlet. Extension Slots and Ports • • 10/100 Ethernet port.
PAGE 5
Federal Communication Commission Interference Statement FCC ID: TV7CUBE60 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 6
CE Declaration of Conformity Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products CS Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU.
PAGE 7
BG. Инструкция: Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в уеб браузър, за да настроите продукта. Повече информация в http://mt.lv/help-bg CS. Návod k použití: Připojte napájecí adaptér k zapnutí přístroje. Otevřete 192.168.88.1 ve webovém prohlížeči pro konfiguraci produktu. Více informací najdete v http://mt.lv/help-cs DA. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet.