User Manual

1.
2.
3.
4.
5.
6.
wAP R ac
wAP R ac
The wAP R ac is a small weatherproof device with integrated antennas and miniPCIe slot for your modem.
Quickstart
Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see ).wAP R ac#Bottom Lid
Install your desired modem into the miniPCIe slot (see miniPCIe usage)
Insert the SIM card into the slot with the chip facing up.
Choose your powering solution, please see the section for possibilities.wAP R ac#Powering
Open network connections on your PC and search for the SSID that begins with "MikroTik".
Connect to the wireless network, open in your web browser to start the configuration.https://192.168.88.1
User name: a and there is no password by default you will be logged in automatically to the Quick Set screen. dmin
Update the device by clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to
ensure the best performance and stability. Must have a valid SIM card inserted.
To manually update the device, please gohttps://mikrotik.com/download
Choose ARM packages for this device and download it to your PC.
Upload downloaded packages to the WebFig "Files" menu and reboot the device.
Updatingyour RouterOS software to the latest version will ensure the best performance, stability, and security updates.
To personalize your wireless network, SSID can be changed in the fields "Network Name";
Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.
Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next
time.
Click on the "Apply Configuration" to save changes.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Scan QR code and choose your preferred OS.
Install and open application.
By default, the IP address and user name will be already entered.
Click Connect to establish a connection to your device through a wireless network.
Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
An advanced menu is available to fully configure all necessary settings.