User Manual

Table Of Contents

GESP+POE-IN

Connecting

Connect to your host device with an rj45 Ethernet connector end.

Secure grounding to your rackmount or other preferable grounded source.

Use an Ethernet cable to connect with the device on the mast to deliver PoE.

Apply power using the power adapter.

Mounting

It is possible to attach the device to a wall or mast using the provided bracket:

PAGE 1
GESP+POE-IN GESP+POE-IN Connecting 1. Connect to your host device with an rj45 Ethernet connector end. 2. Secure grounding to your rackmount or other preferable grounded source. 3. Use an Ethernet cable to connect with the device on the mast to deliver PoE. 4. Apply power using the power adapter.
PAGE 2
Guide screw through a bracket and secure it to the wall, use dowel depending on the wall material. Clip the device to the bracket. Please connect the grounding cable to the well-grounded source. LED status The device has an LED indicating the active status of the connected Ethernet port.
PAGE 3
FI Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products FR Le soussigné, Mikrotīkls SIA, déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: https://mikrotik.