User Manual

ManualsBrandsMikroTik ManualsAccessoriesG1040A-60WF

Table Of Contents

G1040A-60WN

G1040A-60WN

G1040A-60WN

Safety information

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for

preventing accidents. The installer should be familiar with network structures, terms, and concepts.

This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making

sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify

the device.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate

at your own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power cable from the power outlet.

Information

Technical specifications, brochures, and more info about products at https://mikrotik.com/products

If you need help with configuration or installation, please seek a consultant https://mikrotik.com/consultants

Powering

The unit accepts power from an AC source:

Input: 100-240V ~ 50/60Hz.

Output:

DC output voltage (V) 12

DC output current (A) 5

DC output power (W) 60

Installation

Push blue anchor to the right side and pull out old PSU:

Install replacement unit by inserting into position and pushing in until blue anchor locks.

Summary of content (4 pages)

PAGE 1
G1040A-60WN G1040A-60WN Safety information Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts. This equipment is to be installed by trained and qualified personnel, as per these installation instructions.
PAGE 2
The PSU can be replaced while the device is operating. Operation Environment Operating temperature: -40°C to 70°C Ingress Protection - IP 20 WARNING. Warning statements identify conditions or practices that could result in injury or loss of life. Symbols on the Product The following symbols may appear on the product: HIGH VOLTAGE: This symbol indicates high voltage. It calls your attention to items or operations that could be dangerous to you and other people operation this equipment.
PAGE 3
DE Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp G1040A-60WN der Richtlinie 2014/30/EU entspricht. Der vollständige Text der EUKonformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products EL Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός G1040A-60WN πληροί την οδηγία 2014/30/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: https://mikrotik.
PAGE 4
NL Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur G1040A-60WN conform is met Richtlijn 2014/30/EU. De volledige tekst van de EUconformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products NO Mikrotīkls SIA erklærer herved at utstyret G1040A-60WN er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/30/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: https://mikrotik.