User Manual

1.
2.
3.
4.
5.
6.
CRS354-48G-4S+2Q+RM
CRS354-48G-4S+2Q+RM
The CRS354 is a network switch with 48 Gigabit ports and four 10G SFP+ ports, two 40G QSFP+ ports. The device is ready to use as a switch.
Quick start
Mount unit in a rackmount cabinet or place on the flat surface (see "Mounting").
Connect two powering units to the AC source using power cords.
The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility.
Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username admin and no password. In case IP is not
available, use Neighbors to connect through MAC address.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability. The device needs to have an active internet connection.
To manually update the device, please go to https://mikrotik.com/download
Choose packages for this device (MIPSBE) and download them to your PC.
Upload downloaded packages to the (Winbox) (Files) menu and reboot the device.
Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates.
Set up your password to secure the device.
Mounting
The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack mounts, or it can be placed on the desktop.
Use a Phillips screwdriver to attach rackmount ears on both sides of the device and for both sides of the back of the device if designated use is for
rackmount enclosure:
Attach the bracket to the front right side.
Attach the rear right bracket.
Attach the bracket to the left front side.
Attach the rear left bracket.
Attach long brackets to the rackmount and install the device with the holes so that the device fits conveniently.
If needed, install cable management brackets.