Product Description

ManualsBrandsMIKO ManualsElectronicsIntravenous drip monitoring system

Miko Drip 點滴監測系統

Miko Drip IV Monitoring System

Company Name: Mikotek Information Inc.

Company Address: 3F., No.20, Aly. 18, Ln. 478, Ruiguang Rd., Neihu Dist., Taipei City 114,

Taiwan(ROC)

Product Name: Miko Drip

Trade Name: MIKO

Model Number: MK-D1010

Serial Models: MK-D1000

Power Supply: 3V 4pics/ AA

Protocol: Bluetooth

Modulation：GFSK

RF bandwidth：220 kHz (-3 db), 1 MHz (-20 db)

RF band：2.4 GHz ISM band (2.4 GHz ~ 2.4835 GHz)

Range: 0～2500g

Product Description / Specifications: Miko Drip is an intravenous drip monitoring system, which

has been developed for hospital and facility use. The system monitors real-time weight of IV drips,

and enables the ability of remote visibility. Different from legacy walk around checks, caregivers

now can receive abnormal events and IV status notifications with mobile app in the distance

Expected usage:

Miko Drip monitors intravenous drip status, and transports alert message and information

instantly to medical staff when IV drip will be empty or abnormal.

Environment:

Temperature: 5℃~40℃

Humidity: less than 80%RH

Atmospheric pressure: 86kPa~106kPa

Storage Conditions:

Transport temperature: -20℃~+55℃

Humidity: less than 93%RH

Manufacturer: Mikotek Information Inc.

Manufacturer:

3F., No.22, Aly. 18, Ln. 478, Ruiguang Rd., Neihu Dist., Taipei City 114, Taiwan(ROC)

Before Use

Precautions:

 In order to ensure the security of the operating system and data, before installing this

system software please make sure that you have installed the appropriate anti-virus

Summary of content (8 pages)

PAGE 1
Miko Drip 點滴監測系統 Miko Drip IV Monitoring System Company Name: Mikotek Information Inc. Company Address: 3F., No.20, Aly. 18, Ln. 478, Ruiguang Rd., Neihu Dist., Taipei City 114, Taiwan(ROC) Product Name: Miko Drip Trade Name: MIKO Model Number: MK-D1010 Serial Models: MK-D1000 Power Supply: 3V 4pics/ AA Protocol: Bluetooth Modulation：GFSK RF bandwidth：220 kHz (-3 db), 1 MHz (-20 db) RF band：2.4 GHz ISM band (2.4 GHz ~ 2.
PAGE 2
software and firewall.  Before use the Miko Drip Management system, please confirm the capacity of device licenses and due date.   You should read the instructions before using the equipment. When the equipment shows abnormal warnings or behaviors, please reboot the default settings. If reboot the default settings cannot make the equipment work, please stop use equipment and contact the original manufacturer or distributor to repair or update.
PAGE 3
device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.  FCC INFORMATION：The Federal Communication Commission Radio Frequency Interference. Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential. installation.
PAGE 4
Concept of operations： Miko Drip IV Monitoring System is used in monitoring the weight of intravenous drip. Miko Drip system calculates the remanding time and flow rate by measuring the weight. Hanging correctly：   Please hang the equipment on the IV drip stand (as left picture), and hang the IV drip bag on the equipment’s hook correctly. Be sure not handing other object on the equipment and IV drip at the same time.
PAGE 5
Long press：Switch mode 1 / Short click：Hear the sound “Bee”, ”Bee Bee”, or ”Bee 3 Bee Bee” to recognize mode1, mode2, or mode3. Long press：Switch mode 2/ Short click：Turn up the volume 4 5 Long press：Switch mode 3 / Short click：Turn down the volume 6 Direction of charging battery 10 Precautions     12 It is recommended to use a manufacturer approved battery. Make sure put the(+)(-) terminals in the correct direction.
PAGE 6
(3) Specifications： No. Category Description 1 Model MK-D1010 2 Connectivity Bluetooth Low Energy (Bluetooth 4.0) 3 Battery 4x battery AA(LR6) 1.
PAGE 7
(5) Button and structure description       Switch power key to standby the equipment and check the light in green quickly flashing. Long press the first button [Start/End] key to start monitor  When light in blue quickly flashing means data clear or no IV bag.  When light in green slow flashing means monitoring and not reaching the alarm value.  When light in red quickly flashing means reaching the alarm value. It is time to change the IV bag.
PAGE 8
(6) Start to Use Miko Drip Instructions (7) Correspond with System Different colors represent different status of the equipment. The color correspond to the light of equipment.  Blue：Data clear or no IV bag.  Green：Monitoring and not reaching the alarm value.  Red：Reaching the alarm value. It is time to change the IV bag.  Grey：No Connection.