Quick start Guide

ManualsBrandsMikme ManualsPortable Digital RecordersBlackSilver Microphone

12/6/2018 Laura says…

https://intercom.help/mikme/mikme-first-steps/quick-start-guide 1/7

Quick Start Guide

Learn the basic features and start creating with Mikme.

Written by Laura Helm

Updated over a week ago

1 – First, charge your Mikme

We're going to get Mikme ready to perform. Use the included USB cable to charge your Mikme

via USB plug (either a computer or a wall plug). The power LED will start blinking orange after

some minutes.

! Let Mikme charge for approximately 4 hours. While charging, the Power LED will flash orange.

Once Mikme is fully charged the Power LED light turns off.

Go to Mikme

Search for answers...

All Collections Mikme First Steps Quick Start Guide

Summary of content (7 pages)

PAGE 1
2/6/2018 Laura says… Go to Mikme Search for answers... All Collections Mikme First Steps Quick Start Guide Quick Start Guide Learn the basic features and start creating with Mikme. Written by Laura Helm Updated over a week ago 1 – First, charge your Mikme We're going to get Mikme ready to perform. Use the included USB cable to charge your Mikme via USB plug (either a computer or a wall plug). The power LED will start blinking orange after some minutes. ! Let Mikme charge for approximately 4 hours.
PAGE 2
12/6/2018 Laura says… 2 – Power on First, disconnect the USB cable. Then press the power button for 1 second. Hence the power LED and top LED will light up. https://intercom.
PAGE 3
12/6/2018 Laura says… 3 – Record Tap the button to start recording: the top LED will be red. Tap the top button again to stop and save the recording. The top LED will be white. To turn off Mikme, just hold down the Power button for 5 seconds. 4 – Pair Mikme with your iOS device Download the App from the App store (Mikme Audio Recording App). As the app is in a public beta stage, it is recommended to make regular backups of your recordings and check the AppStore for the latest version on a regular basis.
PAGE 4
12/6/2018 Laura says… Press and hold the Bluetooth for 2 seconds. Mikme goes into pairing mode. https://intercom.
PAGE 5
12/6/2018 Laura says… 5 – Play around with the App The Mikme Recording App works seamlessly with the Mikme Microphone and lets you capture audio with ease. See the Mikme App's main features at a glance: Remote control local recordings You can control your Mikme Microphone remotely. Start and stop local audio recordings and change settings of the microphone. The recording will be streamed right away to the app.
PAGE 6
12/6/2018 Laura says… Wirelessly record and sync audio & video Record audio from the Mikme Microphone wirelessly while capturing video with the camera of your iPhone. The App will automatically synchronise the audio with the video. You can then modify your creation with the different editing options available. For much information see the article 6 – Getting familiar with your Mikme Below a quick recap.
PAGE 7
12/6/2018 Laura says… Did this answer your question? We run on Intercom https://intercom.