Installation plan Washing machine PWM 908 DP Always read the operating and installation instructions before setting up, installing, and commissioning the machine. This prevents both personal injury and damage to the machine.
Please have the model and serial number of your machine available when contacting Technical Service. Canada Importer Miele Limited Professional Division 161 Four Valley Drive Vaughan, ON L4K 4V8 Phone: 1-888-325-3957 www.mieleprofessional.ca professional@miele.ca Miele Professional Technical Service Phone: 1-888-325-3957 serviceprofessional@miele.ca Manufacturer: Miele & Cie.
PWM 908 en-CA Machine dimensions * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-CA Installation * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-CA Washer-dryer stack * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-CA Installation * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-CA Installation * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-CA Technical data Drum volume l PWM 908 DP 73 (2.58 ft3) Capacity kg 8.0 (17.6 lb) Door opening diameter mm 300 (11 13/16 in) Max. spin speed rpm 1,500 g factor Residual moisture (standard load according to DIN 60456) 613 % 48 E l e c t r i c al co nn e c t io n ( E L ) Standard voltage (CDN & USA only) 2 AC 208-240 V Frequency Hz 60 Total rated load kW 4.0 – 5.2 Fuse rating A 2 x 30 Supply cable min.
PWM 908 en-CA Technical data PWM 908 DP I n s t a ll a t io n on m a ch in e f e e t ( F ) No. of machine feet No.
PWM 908 en-CA Installation and planning notes Installation requirements Cold water connection The machine should only be connected to a power supply provided in accordance with all appropriate local and national legislation and regulations. The washing machine should be connected to a domestic water supply in accordance with current local and national safety regulations.
PWM 908 en-CA Connecting the drain hose to a sink drain outlet Interface The drain hose can be connected securely to a suitable sink drain outlet. The machine can be retrofitted with an XKM 3200 WL PLT communication module. This module can be used as a WiFi or LAN interface. The LAN interface provided via the module complies with SELV (Safety Extra Low Voltage) in accordance with EN 60950. Connected appliances must also comply with SELV.