Installation Plan Tumble dryer PT 8337 EL (Electrically Heated) en - US 21.15 M.-Nr.
U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 609-419-4241 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-991-9380 Fax: 800-220-1348 proservice@mieleusa.com It is essential to read the operating and installation instructions before installing, commissioning or using the machine. This avoids the risk of accidents or damage. All rights reserved. 2 M.-Nr.
PT 8337 EL - measurements in inches 3
PT 8337 EL - measurements in inches 4
PT 8337 EL - measurements in inches 5
Standard installation PT 8337 EL - measurements in inches 6
Option: Installation on concrete platform (BS) PT 8337 EL - measurements in inches 7
PT 8337 EL - measurements in millimeters 8
PT 8337 EL - measurements in millimeters 9
PT 8337 EL - measurements in millimeters 10
Standard installation PT 8337 EL - measurements in millimeters 11
Option: Installation on concrete platform (BS) PT 8337 EL - measurements in millimeters 12
Technical datasheet Tumble dryer: Heating: PT 8337 Electric (EL) Legend: en - US Abbreviations in bold type: Connection required Abbreviations in circle with dashes: Connection optional or required depending on model version Optional extras: BS Concrete base Quality and density of concrete must comply with load.
Equipotential bonding Connection with male thread Connection with washers and nut. 3/8“ x 1 3/8“ 3/8” 10 mm x 35 mm M 10 AC 230V 5 x AWG 14 5 x 1.5 mm² Max. nominal air flow in vented mode Max. permissible pressure loss 21188.8 cu ft/h 0.03 psi 600 m³/h 200 Pa Connection on machine side (ext. diameter) Connection pipe provided on site (int. diameter) Max. temperature 6” 6” 176 °F 150 mm 150 mm 80 °C 82.
Machine data Machine width Machine depth Machine height Casing width Casing depth 35 5/8“ 40 3/4” 55 1/8” 35 3/8” 36 5/8” 906 mm 1035 mm 1400 mm 900 mm 930 mm Minimum width of delivery access to installation site Recommended rear wall gap (measured to front of machine) Min. wall gap (to rear edge of lid) 36 1/4“ 59“ 19 3/4“ 920 mm 1500 mm 500 mm Net weight Dynamic floor load, max.
