Operating instructions for Washing machine W 3228 To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Caring for our environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
Contents Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Before using for the first time. . . . . . . . .
Contents Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Skipping a programme stage . . . . . . . . . . . . . . . . . .
Contents Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Installation surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning and Safety instructions This washing machine conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the washing machine, please read these instructions carefully before using it for the first time. They contain important information on its installation, safety, use and maintenance. Keep these instructions in a safe place and ensure that new users are familiar with the content.
Warning and Safety instructions Technical safety ~ Before setting up the washing machine, check it for any externally visible damage. Do not install or use a damaged washing machine. ~ Before connecting the washing machine, ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician. ~ The electrical safety of this washing machine can only be guaranteed when correctly earthed.
Warning and Safety instructions ~ This machine must not be used in a non-stationary location (e.g. on a ship). ~ Do not make any alterations to the washing machine, unless authorised to do so by Miele. Correct use ~ Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Warning and Safety instructions ~ If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. A special descaling agent is available to order from the Miele Spare Parts Department or via the internet at www.miele-shop.com.
Description of the machine Control panel a Display See the following page for more information b Start button – For delaying the start of a programme – Starts the wash programme c Additional option buttons Additional options can be added to the basic programme. Use the top button to select either the Short, Pre-wash, or Soak option. Use the lower button to select the Water plus option.
Description of the machine Display Programmable functions The display shows: The programmable functions can be used to tailor washing programmes to suit your individual requirements. In programming mode, the display will show the function selected. – delay start – programmable functions Delay start The delay start time selected will appear in the display. After the machine has started, the delay start time counts down. If the delay start time is more than 10 hours, it will count down by the hour.
Before using for the first time Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. This washing machine has undergone a thorough functional test in the factory and there will be some residual water in the drum from this process.
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy usage are determined by the size of the load. To make the most out of your machine, load the maximum dry load for the programme you are using. – Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. – Use the Automatic and Express programmes for small loads.
How to wash correctly Brief instructions The headings numbered A, B, C, . . . show the operating sequence and can be used as brief instructions. A Sort the laundry ,If you use a solvent-based cleaning agent (e.g. one containing benzene) to pre-treat a stain, make sure that any plastic parts (e.g. buttons) are protected, and that the cleaning agent is rinsed off before washing the garment in the machine. ,Do not use solvent-based cleaning agents in or on this machine.
How to wash correctly B Switch on the washing machine C Load the drum ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. D Select Delay start (if required) Make sure that the programme selector is at the , Finish position. ^ Press the Start button to set the delay start time.
How to wash correctly F Select additional option(s) G Select a spin speed Each press of the top button selects the additional options in the following order: Short, Pre-wash, Soak or no option. Use the lower button to select the Water plus option. ^ Press the "Spin" button repeatedly until the indicator light for the spin speed you want comes on. ^ Select the option(s) you want. Not all the additional options are suitable for every programme.
How to wash correctly H Add detergent It is important to dispense the correct amount, because . . . . . . too little detergent results in: – Laundry not getting properly clean and and in time becoming grey and hard to the touch. – Greasy particles clinging to the laundry. – Limescale deposits on the heater elements. . . . too much results in: – Excessive foam which causes a low level of agitation and poor wash, rinse and spin results.
How to wash correctly I Start the programme ^ Press the flashing Start button. If a delay start time has been selected, then this will count down in the display. After the Delay start time has elapsed, the display goes out and the programme starts. J Unload the drum When the programme has finished, the Anti-crease/Finish indicator light will come on. ^ Press the Door button to open the drum door. ^ Remove the laundry. Check that all items have been removed from the drum.
Additional options You can use the additional option buttons to augment the wash programmes. Short For light to nomal soiling with no visible staining. The duration of the main wash is reduced. Water plus If you want to increase the water level for a wash process you can choose one of four settings for the Water plus button. See "Programmable functions Water plus system".
Spinning Final spin speed Programme To omit the final spin (Rinse hold) rpm Cottons 1300 Minimum iron 1200 Delicates 600 Automatic 900 Dark garments 1200 Shirts 600 Denim 900 Express 1300 Silks 400 Woollens 1200 Drain/Spin 1300 Separate rinse/Starch 1200 You can reduce the final spin speed. However, you cannot select a final spin speed higher than that shown in the chart above. Rinse and interim spin There is a spin after the main wash and between the rinses.
Delay start With Delay start you can choose when you want the programme to start. The start of a programme can be delayed from 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example. To select Delay start Make sure that the programme selector is at the , Finish position. The , Delay start indicator will flash in the display. You can now use the Start button to enter the delay start time you want.
Programme chart Cottons 30°C to 95°C 98761) Use for Max. load 7.0 kg Cotton, linen or cotton mix fabrics. Additional options Short or Pre-wash or Soak, Water plus Note for test institutes: The test programme conforms to EN 60456 and the energy label with Directive 1061/2010. Minimum iron2) 30°C to 60°C 4218761) Use for Max. load 3.0 kg Synthetic and mixed fibre garments as well as easy care cotton. Reduce the spin speed for fabrics which crease easily.
Programme chart Shirts 40°C Max. load 2.0 kg Additional options Pre-wash or Soak Notes – Pre-treat collars and cuffs if necessary. – Wash silk garments in the Silks programme. Denim 40°C Max. load 3.0 kg Additional options Short or Pre-wash or Soak Notes – Wash denim inside out. – Denim often contains excess dye and may run during the first few washes. Wash light and dark coloured items separately. Express 40°C 721) Use for Max. load 3.
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level Rinses Interim spin Final spin Cottons d a d 2-41) L L Minimum iron d a ( 2-32) L L Delicates e b e 3 – L Automatic d a ( 2-3 L L Dark garments d a ( 3 L L Shirts ( a ( 2 – L Denim ( a ( 3 – L Express d a d 2 L L Silks ( d ( 2 – L Woollens ( c ( 2 L L Drain/Spin – – – – – L Separate rinse/Starch – – ( 1 – L d = Low water level ( = Mediu
Programme sequence This washing machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary. The programme sequences outlined in the chart are based on the basic programme with a full load. Additional options which can be selected have not been taken into account.
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicate the level of agitation permitted.
Changing the programme sequence Cancelling a programme Changing a programme You can cancel a programme at any time after it has started. After the start of a programme it is no longer possible to select a different programme. ^ Turn the programme selector to , Finish. The programme has been cancelled when the Anti-crease/Finish indicator light comes on (this can take up to 30 seconds).
Changing the programme sequence Adding or removing laundry after a programme has started ^ Press the Door button in until the drum door springs open. ^ Add or remove items. ^ Close the door. The programme will continue automatically. The door cannot be opened, if: – the suds temperature is above 55°C. – the water is above a certain level. – the programme has reached the Final spin stage.
Detergent The correct detergent All modern detergents produced for automatic washing machines are suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads but note that it may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as others and may not be suitable for programmes with short durations.
Detergent The right amount to dispense will depend on the following: – The quantity of laundry. – The soiling level of the laundry. Lightly soiled No visible dirt or stains. Possibly slight body odour. Normally soiled Visibly dirty and/or just a few slight stains. Heavily soiled Visible dirt and stains and/or dried on soiling. – The water hardness level. Check with your local water supplier if you do not know the hardness level in your area.
Detergent Fabric conditioners and liquid starch Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a programme If starching frequently, the dispenser compartment and especially the siphon tube and fabric conditioner channel will need regular cleaning to remove any residual starch.
Cleaning and care ,Disconnect the machine from the mains electricity supply and withdraw the plug from the socket before cleaning the machine. ,The washing machine must not be hosed down. A range of Miele branded cleaning and conditioning agents is available to order from the Miele Spare Parts Department, or via the internet on www.miele-shop.com. External casing and fascia panel Extra cleaning Carry out a hot wash (60°C or above) with powder detergent approx.
Cleaning and care Cleaning the detergent dispenser drawer housing ^ Clean the siphon. 1. Remove the siphon from compartment § and rinse under hot running water. Clean the siphon tube in the same way. 2. Replace the siphon. ^ Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent dispenser drawer housing. If starching frequently, thoroughly clean the siphon and siphon tube regularly. A build-up of starch will cause them to get clogged.
Cleaning and care Cleaning the water inlet filters The washing machine has two filters to protect the inlet valves. These filters should be checked every six months or so, or more often if there are frequent interruptions to the water supply. To clean the filter in the water inlet valve: ^ Using pliers, carefully loosen the ribbed plastic nut on the inlet valve and unscrew. To clean the filter in the union in the open end of the inlet hose: ^ First turn off the stopcock.
Problem solving guide With the help of the following notes minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. ,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
Problem solving guide The wash programme stops and a fault indicator light comes on. Fault indicator The Check drain light flashes. "– – –" appears in the display. The Check inlet light flashes. "– – –" appears in the display. Possible cause Remedy A The water outlet is blocked. Clean the drain filter and the drain pump as described in "Problem solving guide Opening the drum door in the event of a blocked drain outlet and/or power failure". The drain hose has been fixed too high.
Problem solving guide A fault indicator light comes on but the wash programme continues as normal. Possible cause Remedy A The Check drain light flashes. The drain outlet is restricted. Clean the drain filter and the drain pump as described in "Problem solving guide - Opening the drum door in the event of a blocked drain outlet and/or power failure". The Check inlet light flashes. The water inlet is Check whether restricted. – the stopcock is opened wide enough. – the inlet hose is kinked.
Problem solving guide General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine (see "Installation and connection"). The laundry has not been spun properly and is still wet. The machine detected an imbalance during the final spin and reduced the spin speed automatically. Include both large and small items in the load as this will give better distribution.
Problem solving guide An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Grey, greasy particles cling to washed laundry. Insufficient amounts of – Use more detergent. detergent were used – Before washing the next load to break down the run a Cottons 95°C programme particles of grease in with powder detergent but heavily soiled laundry.
Problem solving guide The drum door does not open when you press the Door button Possible cause Remedy The machine is not connected to the electricity supply and / or is not switched on. Insert the plug in the socket and switch on and / or switch the machine on with the I-On/0-Off button. Power cut. Open the drum door as described in "Opening the drum door in the event of a blocked drain outlet and/or power failure". The door was not correctly engaged.
Problem solving guide Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. There is a lever behind the detergent drawer fascia panel. ,Caution: if laundry has been washed at a high temperature, water draining out of the machine will still be hot. Danger of scalding! Procedure for draining the machine Be careful not to release too much water at once.
Problem solving guide Once the flow of water ceases: ,Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. To avoid loss of detergent, pour approx. 2 litres of water into the detergent dispenser drawer after cleaning the drain filter. Excess water will be pumped out automatically before the next wash programme. Opening the drum door ^ Remove the drain filter completely. ^ Clean it thoroughly. ^ Remove any foreign objects (e.g. buttons, coins, etc.
After sales service In the event of any faults which you cannot remedy yourself, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your machine, both of which are shown on the data plate visible above the porthole glass when the door is open.
Installation and connection Front view a Inlet hose (tested to withstand pressure of at least 7,000 kPa) b Electricity supply cable c - f Flexible drain hose (with detachable swivel elbow) g Control panel h Detergent dispenser drawer i Drum door j Access to drain filter, drain pump and emergency release k Handle recesses for moving the machine l Four height adjustable feet 44
Installation and connection Rear view a Protruding lid for holding when moving the machine e Transit bar covers b Electricity supply cable f Restraining clip for inlet hose and drain hose c Inlet hose (tested to withstand pressure of at least 7,000 kPa) g Restraining clips for transit bars when removed d Drain hose 45
Installation and connection Installation surface Installing the washing machine A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. To manoeuvre the machine out of its packing case to its installation site hold it by the edge of the lid where it protrudes to the rear of the washing machine as well as by the handle recesses at the front.
Installation and connection ^ Using the spanner supplied turn the left-hand transit bar 90°, then ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar. ^ withdraw the transit bar.
Installation and connection ,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over retainers a. ,The washing machine must not ^ Fit the covers on to the two holes. Then plug the holes as shown with the caps. be moved without the transit bars in place. Store them as shown or keep them in a safe place for future use.
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered. ^ Use a spirit level to check the machine is standing level.
Installation and connection Washer and Dryer stack The fitting of building-under kits* and stacking kits* must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit. A Miele tumble dryer can be stacked with the washing machine. A "WTV" stacking kit* is necessary.
Installation and connection The Miele water protection system The Miele water protection system protects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose – Overflow protection This prevents the washing machine taking in too much water. If the water level exceeds a certain level, the drain pump switches in and pumps the excess water away.
Installation and connection Connection to the water supply The machine should be connected to a mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations. The machine is designed to operate with a flow pressure of between 100 kPa and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a pressure reducing valve.
Installation and connection Connection to the drainage system Please note: The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull. If required, the drain hose can be extended to a length of 5 m. The necessary parts can purchased from the Miele Spare Parts Department or your Miele dealer.
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Load Cottons Consumption data Energy Water in kWh in litres Normal 95°C 7.0 kg 1.99 49 2 h 09 min 60°C* 7.0 kg 0.99 49 1 h 49 min 60°C* 3.5 kg 0.98 40 1 h 49 min 40°C 7.0 kg 0.75 55 1 h 49 min 40°C* 7.0 kg 0.65 54 1 h 49 min Minimum iron 40°C 3.0 kg 0.50 55 1 h 19 min Delicates 30°C 2.0 kg 0.35 69 Automatic 40°C 3.5 kg 0.35 - 0.50 40 - 55 1 h 13 min Dark garments 40°C 3.0 kg 0.60 60 1 h 13 min Shirts 40°C 2.0 kg 0.
Technical data Height 850 mm Width 595 mm Depth 580 mm Depth with door open 975 mm Height for building under 820 mm Width for building under 600 mm Depth for building under 600 mm Weight 98 kg Capacity 7 kg dry laundry Voltage see data plate Connected load see data plate Fuse rating (UK) see data plate / plug Consumption data see "Consumption data" Water flow pressure min. 100 kPa (1 bar) Water flow pressure max. 1,000 kPa (10 bar) Inlet hose length 1.
Programmable functions for changing default settings The programmable functions can be used to tailor washing programmes to suit your individual requirements.
Programmable functions Water plus system This is used to select the water intake setting for the Water plus additional option. There are four different options: Setting 1: an increase in the rinse water level Setting 2: an increase in the water level in the main wash and rinses (the washing machine is delivered with setting 2 programmed as standard) C Wait until the Start button indicator light comes on . . . D . . . and then release the Start button.
Programmable functions Gentle action Activating gentle action reduces the drum action and is suitable for washing slightly soiled articles more gently. Gentle action can be used with the Cottons, Express and Automatic programmes. If Gentle action is programmed into the machine, every wash cycle in these programmes will be carried out with gentle action rhythm. The washing machine is delivered with the Gentle action setting deactivated. Follow steps A to G to programme and store in memory.
Programmable functions Suds cooling for Cottons When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. Suds cooling takes place when a temperature of 95°C is selected. Suds cooling should be activated: – to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin. – where the drainage pipes do not comply with DIN 1986.
Programmable functions Memory function If an additional option is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme. When that particular programme is chosen again, the washing machine will display the additional option(s) and / or spin speed which have been stored for that programme in the memory. A Press the Start button and keep it pressed in whilst carrying out steps B-C.
Programmable functions Soak duration A length of time of between 30 minutes and 2 hours can be programmed in 30 minute increments for the soak process. If the Soak option is pressed, the selected soak time will be carried out for the period selected before the wash programme is run. A Press the Start button and keep it pressed in whilst carrying out steps B-C. B Switch the machine on with the I-On/0-Off button. C Wait until the Start button indicator light comes on . . . D . . .
Optional accessories Miele washing machines offer perfect care for your laundry and feature a wide range of special programmes designed to suit the fabric being washed. Miele have also developed a range of specialist CareCollection detergents and conditioning products to offer you a complete package for cleaning and caring for your laundry. The Miele CareCollection detergents and conditioning products are listed below.
Optional accessories "UltraWhite" detergent Liquid detergent "For Delicates" This multi-purpose powder detergent has excellent stain removal properties and is suitable for white and light coloured laundry as well as heavily soiled coloured items. This liquid detergent is ideal for the gentle treatment of delicate fabrics, such as wool and silk. Its special formulation cleans effectively at temperatures as low as 20°C, while protecting the colour of your delicate garments.
Alteration rights reserved/0112/W 3228 M.-Nr.
