Operating and Installation instructions

Selecting additional settings
60
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your wine conditioning unit.
 In settings mode, use the and
arrow buttons to selectMiele@home
and selectOK to confirm your selec-
tion.
 Use the and arrow buttons to
selectSet up again and touchOK to
confirm your selection.
Reset configuration?appears on the dis-
play.
 Use the and arrow buttons to
selectYes orNo and touchOK to
confirm your selection.
Resetting the network configuration
Reset the wine conditioning unit’s set-
tings to the default settings when dis-
posing of your wine conditioning unit,
selling it, or putting a used wine condi-
tioning unit into operation. This will re-
set the network configuration so that
all personal data is deleted from the
wine conditioning unit. This will also
ensure that a previous owner is no
longer able to access the wine condi-
tioning unit.
 Reset the settings of the wine condi-
tioning unit as described in the chap-
ter “Resetting the settings to their de-
fault settings”.
Switching off Demo Mode
Demo mode allows the wine condi-
tioning unit to be presented in the
showroom without the cooling sys-
tem being switched on. Do not acti-
vate this setting for domestic use.
If Demo mode has been switched on
as a default setting, will show in the
display.
 In settings mode, use the and
arrow buttons to select Demo Mode
and select OK to confirm your selec-
tion.
Press OK for 4 seconds to deactivate ap-
pears in the display.
 Follow the instructions on the display
and touch and hold the sensor con-
trol OK for 4seconds.
The countdown Demo Mode will deacti-
vate in seconds. will appear in the dis-
play.
Demo Mode deactivated. The appliance will
cool down. appears in the display.
 Confirm the message with OK.
The main screen appears in the display
again.