Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Installation dimensions
- Installing the wine conditioning unit
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the wine conditioning unit into the niche
- Aligning the wine storage unit
- Securing the wine conditioning unit in the niche
- Securing the toe-kick board and cover
- Aligning the appliance door
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching the wine conditioning unit on and off
- Selecting additional settings
- The ideal temperature and humidity
- Door alarm
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
19
Ventilation
Risk of fire and damage due to
insufficient ventilation.
If the wine conditioning unit is not
ventilated sufficiently, the compres-
sor will run more frequently and for
longer periods.
This causes increased energy con-
sumption and an increased com-
pressor operating temperature,
which can result in damage to the
compressor.
Please ensure that there is adequate
ventilation around the wine condi-
tioning unit.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must never be obstructed.
Door hinge
Risk of damage and injury when
changing the door hinges.
Changing the door hinges single-
handedly can cause damage to the
appliance and injury.
The wine conditioning unit is sup-
plied with a fixed hinge. On no ac-
count should you attempt to change
the door hinge yourself.
If you need to change the door hinge
to the other side, please contact the
Miele Service department.
Side-by-side
This wine storage unit can be installed
side-by-side with another wine storage
unit or refrigeration appliance. The fol-
lowing overview will show you which
side-by-side installation options you
have with your wine storage unit.
Depending on the installation situa-
tion, you will need the side-by-side in-
stallation kit for side-by-side installa-
tion (see “Accessories – Optional ac-
cessories”).
You will also need a Top Frame (KTF)
(top cover) for side-by-side installa-
tion. Both are available from your
Miele dealer or the Miele Service.
Instructions for installing wine storage
units/refrigeration appliances side-by-
side can be found in the side-by-side
installation kit installation instructions.
. . .with partition wall
The wall a between the side-by-side
wine conditioning units/refrigeration
appliances must be at least
5/8" (16mm) thick.