Fully Integrated 24” MasterCool K 2602 Vi / K 2612 Vi F 2662 Vi / F 2672 Vi KWT 2602 Vi / KWT 2612 Vi KWT 2662 ViS / KWT 2672 ViS Shown: KWT 2662 ViS Info subject to change 8mieleusa.
Fully Integrated 24” MasterCool SPECIFICATIONS Overall Unit Dimensions 233/4” (604 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche 24” (610 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D Minimum Cabinet Niche Opening Electrical Electrical Requirements K 26x2 Vi KWT 26x2 Vi Power Cord Plumbing F 26x2 Vi 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separate outlet must be used for each appliance.
Fully Integrated 24” MasterCool CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 24” MasterCool POWER SUPPLY AND WATER CONNECTION (Water Connection For F 26x2 Vi Only) Rear View Water Connection: • 1/4” water line is required • Located at the rear of the appliance on a 4’ 11” line. • 1/4” compression fitting, ready to accept 1/4” line. Side View Notes: • In case of an emergency the electrical outlet and water shutoff must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 24” MasterCool CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supp For Models: For Models: For Models: the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surroun • KWT 2602 Vi • KWT 2612 Vi • K 2602 Vi • K 2612 Vi • F 2662 Vi • F 2672 Vi cabinets.
Fully Integrated 24” 1MasterCool 15° Door HINGING ThDETAILS ickne115° ssOPENING options 0-1/8" Available for the following models: • K 26x2 Vi • F 26x2 Vi • KWT 26x2 Vi(S) 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.4mm) 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" Cabinet Front 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) 0-3 /4” mm ) ) ) ) 1-3/4”(44.
Fully Integrated 9MasterCool 0° Door 24” Thickness options Thickness HINGING DETAILS 90° OPENING 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 2” (51 mm) 2" 90° Door 1-3/16” (30mm) 1-7/16” (36.5mm) 7/16” (11 mm) 0-1/8" Available for the following models: • K 26x2 Vi • KWT 26x2 Vi(Si) 0-1/8” (3 mm) 115° Door 1-1/2" 1-3/4" Thickness options1-11/16” (43mm) 1-15/16” (49.
