Operating Instructions Rotary Iron HM 16-80 To prevent accidents and machine damage read these instructions before installation or use. en - US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the Rotary Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Moving and folding the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Transport strut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Before using for the first time. . . . . . . . . . . . . . .
Contents Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Cleaning the water reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Ironing cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 After sales service . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS Technical and electrical safety Read the operating instructions carefully before using this appliance for the first time. They contain important information about the safe operation and care of your appliance. To prevent personal injury or damage to the rotary iron, it is important that you read this booklet carefully. Keep the instructions in a safe place for reference, and pass them on to any future user. Proper use ~ Use appliance only for its intended use.
IMPORTANT SAFETY INSTRUCTIONS ~ Before connecting the appliance, ensure that the connection data on the data plate (fusing, voltage and frequency) match the household electrical supply. If in doubt, consult an electrician. ~ To reduce the likelihood of circuit overload, do not operate another high wattage appliance on the same circuit. ~ Do not modify the machine power cord or plug. ~ Do not use an extension cord to connect this appliance to electricity.
IMPORTANT SAFETY INSTRUCTIONS Use ~ Be aware of loose fitting or hanging clothing when using the rotary iron. Items such as wide sleeves or apron strings could be wound in the roller. ~ Remove all jewlery and tie back long hair before ironing. ~ Do not allow children to play on or near the rotary iron, or to operate it themselves. ~ Close supervision is necessary for any appliance being used by or near children. Do not leave appliance unattended while connected.
Guide to the Rotary Iron l a m b k j c i h g d e f a Temperature selector h Laundry rod b Emergency release i Feed board c Control panel j Roller d Release catch k Heater plate e Power cord l Finger guard f Foot pedal switch m Water reservoir with cap g Ironing table 7
Guide to the Rotary Iron Control panel g a f b e c d a Roller speed selector e Steam indicator Q b On/Off indicator I-0 f Temperature indicator oC c On/Off button I-0 g Water empty indicator a d Steam switch Q 8
Moving and folding the appliance Transport strut Do not remove the transport strut until the rotary iron has been placed onto the four rollers. ^ Pull out the transport strut. Keep the strut in a safe place. It will need to be attached each time you transport the appliance.
Moving and folding the appliance The rotary iron sits on 4 rollers. ^ Hold the iron by the ironing table and push or pull to move it. To steer the iron and to handle obstacles such as carpet edges and doorways: ^ Hold the ironing table and release the catch, located on the right-hand side at the back, underneath the ironing table. ^ Tip the iron slightly. The iron can be moved either when folded or unfolded.
Before using for the first time Power cord The power cord is wound behind the ironing table. ^ Unwind the cord. ,Do not insert the plug into the electrical socket yet.
Before using for the first time A dust cover is placed on the roller for protection during shipping. ^ First remove the feed board by lifting it out of the right hand holder, then pull it out to the left of the roller. ^ Plug the appliance in and turn it on. The heater plate will rise automatically. ^ The protective dust cover can now be pulled off. 12 ^ The adhesive film supplied with iron can now be placed around the temperature selector.
Before using for the first time Preparing the work area Preparing the laundry When positioning the rotary iron, make sure it is level. This will ensure even steam production and keep the appliance from rolling sideways. Proper preparation of the laundry is essential for good results. A height-adjustable chair and a flat surface for stacking completed items will be useful.
Before using for the first time Pulling into shape and smoothing out ^ Pull the dampened laundry into shape as usual. ^ Smooth out any ribbons, straps, seams, and hems. ^ Large items such as table cloths, bed linens, etc., should be folded lengthways into a number of pleats so that they can be ironed as easily as possible. Testing the finger guard The finger guard is a safety feature, and should be checked every time the rotary iron is used. ^ With the iron turned on, press the foot pedal all the way down.
Steam setting For ironing dry or nearly dry laundry items, the steam setting can be used. Only ever fill the water reservoir to the lower edge of the spout. Ironing with and without steam If the laundry items are already damp, use the iron without steam. The steam setting is intended for pressing dry or nearly-dry laundry. Filling the water reservoir ^ To prevent water from spilling over when you close the roller down, be sure the cap is secure.
Steam setting Emptying the water reservoir ,Do not attempt to empty the water reservoir unless the roller and water are both cool. Always empty the reservoir once you have finished ironing. This will help prevent damage to the reservoir from damage caused by standing exposure to such elements in the water as chlorine, calcium, and copper. ^ Unscrew the cap. ^ The funnel can be screwed into place for easier emptying. ^ Slowly flip open the roller while simultaneously holding a suitable receptacle (e.g.
Ironing Turning on and off Selecting the ironing temperature (operation without steam) The temperature selector is used to set the ironing temperature. The temperature range is marked by dots on the ring around the temperature selector. These correspond with the international fabric care symbols for ironing. Material Use the I-0 button to turn the rotary iron on and off.
Ironing Turning the steam setting ON and OFF Before turning on the steam setting, you will need to turn the temperature selector to the ßßß setting. ^ Use the Q button for "Steam" to turn this setting on and off. Turning on ^ Press the Q button. ^ Turn the temperature selector to the desired temperature. The "Temperature" indicator oC will light up while the roller is heating up. The light will go out when the desired temperature is reached.
Ironing Selecting the roller speed Ironing There are 5 roller speed settings, from low (approximately 6.5 ft/min.[2 m/min]) to high 15 ft/min. [4.5 m/min]). The ironing process is controlled by the foot pedal, which has three operating positions: A lower roller speed makes it easier to iron complicated articles, such as shirts and blouses.
Ironing Positioning the laundry Removing the feed board ^ Arrange the laundry items on the feed board so that they are straight, and smooth them out by hand. The feed board can be removed when shaped garments are being ironed, e.g. skirts (round). ^ Then turn the roller by hand until the edge of the article to be ironed can be hel by the heater plate. ^ Lift the feed board out of the right-hand holder, then pull it outward toward the left of the roller. ^ Press down the foot pedal.
Ironing Tips After ironing – To avoid creasing: Stop the roller, pull the item back towards you slightly, and smooth it out by hand. If needed, dampen again with a wet cloth or spray bottle. ^ Turn the appliance off. – If possible, always use the whole width of the roller, to maintain the smooth, elastic surface of the roller. – For small items, such as handkerchiefs, alternate between the right and left-hand sides of the roller.
Ironing Power failure To free a trapped item: In the event of a power failure, pull the emergency release lever up. If there is a power failure while the iron is in use, the heater play will stay pressed onto the roller. The item being ironed will be held there, and can become scorched. ^ Pull the emergency release lever up. The pressure is reduced, and the item can be removed. When the power is restored (the On/Off indicator comes on), push the emergency release lever back down.
Ironing Tips Towels, dishcloths, handkerchiefs, napkins, etc. ^ Lay the item with the straight grain of the fabric to the feed board. This will prevent it from losing its shape and will be easier to fold. Pass handkerchiefs diagonally through the rotary iron and, if necessary, fold them and then iron again. ^ Please use the whole length of the roller. Tablecloths ^ Avoid creases by ironing the middle first.
Ironing Tips Duvet covers Pillowcases ^ Lay the pillowcase on the feeder plate, position under the heater plate and iron in one step. ^ If the open end has buttons, only pass it through the rotary iron if the buttons are heat resistant. If the duvet cover has buttons at the open end, iron the buttons first. Note: Only pass this end through the rotary iron if the buttons are heat-resistant.
Ironing Tips Shirts ^ Remove the feed board to iron shirts. ^ Then turn down the collar and press lightly, holding taut. 1. Shoulder yoke 3. Front sides ^ Arrange the yoke, collar first, on the roller and smooth out. ^ Hot press the yoke. 2. Collar The collar is ironed on both sides using the left hand end of the roller. Stop ironing when the button comes to the heater plate. ^ Lay the button hole front on the left hand end of the roller with the side seam along the edge of the roller.
Ironing Tips 4. Back 5. Cuffs and sleeves ^ Start at the side seam. Pull the shirt over the roller as far as the arm hole. Smooth it out. ^ First iron both sides of the cuff on the left edge of the roller. Fold double-cuffs with one button hole placed over the other one and press lightly. ^ Starting from the side seam iron past the armhole, then pull the shirt further onto the roller and iron the full back length to the second arm hole.
Ironing Tips Smock-type aprons Steam-pressing pants ^ Iron smocks as you would a shirt. ^ Lay each pant leg separately on the roller. Let the upper part hang down over the left edge of the roller. Aprons with ties ^ Iron the ties one by one up to the bib, then over the bib and up to the waistband. ^ Then iron, in passes, up to the waistband, or iron crosswise. Let the bib hang over the left edge of the roller.
Cleaning and care ,Turn the iron off and unplug it from the outlet before performing any maintenance work. Cleaning the heater plate ^ Check that the temperature selector is set " g ". ^ Allow the heater plate to cool before cleaning. ^ Pull the emergency release lever up to make sure easier cleaning. ^ Clean lime or starch deposits from the heater plate using a non abrasive household cleaner. Avoid spraying the heater plate. Do not use abrasive cleaners.
Cleaning and care Ironing cover It is normal for the ironing cover on the roller to become slightly brown with use. Wash the cover with a hot temperature program (140°F [60°C]). If the cover looks worn and used, it can be easily replaced. Ironing covers are available at your Miele dealer or Miele. Replacing the ironing cover ,The ironing cover should only be ^ Unwind the old ironing cover. changed when the appliance is cold. ^ Remove the feed board.
Cleaning and care ^ Hold the corners of the cotton padding, pull taut, and lay it taught over the heater plate. Note : the slot for the cotton padding is now at the top. ^ Insert the long edge of the new ironing cover into the retaining slot with the side seams inside (upside down). Keep side ties hanging free and smooth out. ^ Turn the roller by hand in the direction you iron (see arrow) until the retaining slot is at the bottom. ^ Turn the rotary iron on.
Cleaning and care Once the roller has completed 3 or 4 revolutions and the end of the ironing cover is under the heater plate: ^ Turn the rotary iron off while keeping the foot pedal pressed down. The ironing cover is held firmly in place with the heater plate which is still lowered. ^ Tighten the cords at the left and right-hand sides of the roller, tie together and tuck under the cover. ^ Put the feed board back into place. ^ Turn the rotary iron on. The heater plate will rise.
Frequently asked questions ,Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot be held responsible for unauthorized work. The rotary iron does not turn on. Possible fault Solution The rotary iron has no power. Plug the machine in and check if the circuit breaker has tripped. The laundry is not properly or poorly pulled in.
Frequently asked questions No steam is being produced. The indicator light Q for "Steam" goes out while ironing. Possible fault Solution The iron temperature is too low for steam production. Set the temperature selector to ßßß and wait until the display light comes on. No steam is being produced. The indicator light Q for "Steam" goes out while ironing, and the indicator a for "Water empty" is red. Possible fault Solution The water reservoir is empty. Fill the water reservoir.
After sales service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of you appliance given on the data plate under the front side of the appliance.
Electrical connection The appliance is supplied with a power cord and NEMA 6-20 P plug ready for connection to a 2AC 208-240V 60 Hz power supply (see data plate). The fuse rating is 2x20 amps. ,Do not modify the machine power cord or plug, the machine is approved for US and CDN. All electrical work should be carried out by a qualified electrician in accordance with local and national safety regulations. Do not connect the rotary iron to an extension cord.
Technical data Height 37 3/4" (folded 41 3/8") [95.9 (folded 105.2) cm] Width 38 3/4" (folded 19 5/8") [98.
Help protect our environment Disposal of packing materials Disposal of an old appliance The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Old appliances contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrapping, bags, etc. are disposed of safely and kept out of the reach of children.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany All rights reserved / 47.21 M.-Nr.
