Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time of day
- Water hardness
- AutoDos (AutoDos)
- Rinse Aid
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Extra Clean
- Extra Dry
- 2nd interim rinse
- Knock2open
- BrilliantLight
- Hygiene cycle
- Software version
- Showroom program
- Factory default
- Copyrights and licenses for the communication module
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Program options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Frequently Asked Questions
96
Fault messages
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before remedying the fault:
Turn off the dishwasher.
Fault FXX There may be a technical fault.
Turn the dishwasher back on after a few seconds.
Select the desired program.
Close the door.
If the fault message appears again, there is a techni-
cal fault.
Turn off the dishwasher.
Turn off the water supply.
Contact Miele Customer Service.
Waterproof The Waterproof system has reacted.
Turn off the dishwasher.
Turn off the water supply.
Contact Miele Customer Service.
Fault F78 Circulation pump fault.
Turn off the dishwasher.
Turn the dishwasher back on.
Select the desired program.
Close the door.
If the fault message appears again, there is a techni-
cal fault.
Turn off the dishwasher.
Turn off the water supply.
Contact Miele Customer Service.