User Guide

Frequently Asked Questions

General problems

Problem Possible cause and solution

The indicator lights and

time display are dark.

The dishwasher has switched off automatically to

save energy.

 Turn the dishwasher on again with the  button.

Detergent residue is left

in the dispenser at the

end of a program.

The dispenser was still damp when detergent was

added.

 Make sure the dispenser is dry before adding de-

tergent.

The dispenser cover

cannot be closed.

Detergent residue is blocking the latch.

 Remove the detergent residue.

The inside of the door

and/or the interior walls

are wet after a program

has finished.

This is caused by the drying system and does not in-

dicate a fault. The moisture will dissipate after a

while.

Water remains in the

wash cabinet at the end

of a program.

Before fixing the fault:

 Turn the dishwasher off with the  button.

The filter system in the wash cabinet is clogged.

 Clean the filter system (see "Cleaning and care -

Filter system").

The drain pump or non-return valve is blocked.

 Clean the drain pump or the non-return valve (see

"Frequently asked questions").

The drain hose is kinked.

 Remove the kink.