User Guide

Before using for the first time
21
 Turn the dishwasher off with the 
button, if it is turned on.
 Press the Start button and, simulta-
neously, switch the dishwasher on
using the  button.
Keep the Start button pressed for at
least four seconds until the Start indi-
cator light comes on.
If this does not happen, start the proce-
dure from the beginning again.
 Press the  button three times.
The  indicator light will flash 3 times
at short intervals.
The set value will appear in the display
after .
The flashing sequence  will appear in
the display.
This indicates a factory default setting
of 3.
 Use the Start button to select the set-
ting required.
Each press on the button moves you
up a level. After reaching the highest
value, the counter starts from the be-
ginning again.
The setting is now saved.
 Turn the dishwasher off with the
button.