Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Selecting additional settings
- Freezing and storing food
- Adjusting the interior fittings
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinges
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Water connection
- Electrical connection
Frequently Asked Questions
51
Messages in the display
Message Possible cause and solution
The symbol lights up
in the display. You can-
not switch the appli-
ance off.
The safety lock has been activated.
Completely deactivate the safety lock (see “Select-
ing additional settings”, section “Activating and de-
activating the safety lock”).
“F0toF9” appears in
the display.
There is a fault.
Contact Miele Technical Service.
“FE*” appears on the
display.
There is a fault.
Contact Miele Service.
The alarm symbol
lights up in the display.
An alarm also sounds.
The door alarm has been activated.
Close the appliance door. The alarm symbol
will go out, and the alarm will stop sounding.
The alarm symbol
flashes in the display.
The temperature in the freezer zone has risen higher
or fallen lower than the set temperature.
This could be due to, for example:
– the appliance door being opened too often, or
being left open,
– a large quantity of fresh food being placed in
the freezer all at once without the SuperFrost
function being turned on, or
– a prolonged power outage.
Rectify the cause of the alarm. The alarm symbol
will go out, and the alarm will stop sounding.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.
The symbol flashes
on the display and the
indicator light on the ice
cube maker flashes
when the ice cube
maker is switched on.
The water supply line is not open.
Open the water supply line.