Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Selecting additional settings
- Freezing and storing food
- Adjusting the interior fittings
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinges
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Water connection
- Electrical connection
Cleaning and care
46
Before cleaning
Turn the appliance off.
The display goes out and the cooling
function is turned off.
If this does not work, the safety lock is
activated (see “Selecting additional set-
tings – Activating and deactivating the
safety lock”).
Unplug the appliance or flick the cir-
cuit breaker to off.
Take any food out of the appliance
and store it in a cool place.
Remove the shelves:
Lift them up at the front slightly and
then pull them forward and out.
The telescopic runners on the
shelves are not dishwasher safe.
Removing the telescopic runners
To remove the telescopic runners:
1. Push the catch upward.
2. Push the telescopic runner to the
side.
3. Then pull the telescopic runner off to
the rear.
To reattach the telescopic runners to
the shelf after cleaning:
1. Hook the telescopic runner on at the
rear.
2. Then clip the catches into position at
the front.