Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Selecting additional settings
- Freezing and storing food
- Adjusting the interior fittings
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinges
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Water connection
- Electrical connection
Adjusting the interior fittings
36
Removing freezer drawers on
telescopic runners
Some of the freezer drawers are on tele-
scopic runners and can be removed for
filling, emptying, or cleaning purposes.
Pull the drawers out as far as they will
go.
Holding the sides of the drawer at the
back, lift it up and then forward and
out.
Push the runners back in again to
avoid damaging them.
Be careful not to wash away the spe-
cial lubricant in the telescopic run-
ners during cleaning.
Wipe the telescopic runners with a
damp cloth to clean them.
To replace the drawer, push the run-
ners back in completely and then
place the drawer on them.
Push the drawer into the appliance
until it clicks into position.
Removing the shelves
The shelves can be removed.
Lift the shelf slightly at the front and
then pull it forward and out.