Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Selecting additional settings
- Freezing and storing food
- Adjusting the interior fittings
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinges
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Water connection
- Electrical connection
Selecting additional settings
27
By touching theorsensor, you
can now select whether the safety
lock is activated or deactivated:
0: the safety lock is deactivated
1: the safety lock is activated.
Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and thesymbol will flash.
Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after ap-
proximately one minute.
Thesymbol will appear in the display
when the safety lock is activated.
Audible signals
The appliance has audible signals such
as the button tone and the door and
temperature alarms.
You can turn the button tone and the
door alarm on and off, but you cannot
turn off the temperature alarm.
There are 4settings to choose from.
Option3is set at the factory; this
means that the button tone and the
door alarm are switched on.
Switching acoustic signals on/off
Touch the settings sensor.
All symbols available for selection will
appear on the display and the sym-
bol will flash.
Touch the sensors for setting the
temperature (or) repeatedly until
the symbol flashes on the display.
Touch the OK sensor to confirm the
selection.
The most recently selected setting
flashes and the symbol lights up on
the display.