Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Selecting additional settings
- Freezing and storing food
- Adjusting the interior fittings
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinges
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Water connection
- Electrical connection
Selecting additional settings
26
Certain settings for the appliance can
only be selected in settings mode.
While you are in settings mode, the
door alarm and any other fault mes-
sages are suppressed automatically,
but the alarm symbol lights up on
the display.
Available settings
Activate and deactivate the
safety lock
Turn the ice maker on/off (set
the amount of water; rinse the
ice maker; set the cleaning po-
sition for the ice cube tray)
Switch acoustic signals on/off
Change the brightness of the
display
Switch Sabbath mode on/off
All available settings for the ice maker
are described in “Making ice cubes”
and “Cleaning and maintenance”.
All other available settings are de-
scribed below.
Safety lock
The safety lock can be activated to pre-
vent:
- the appliance being switched off by
mistake,
- the temperature being changed by
mistake,
- selection of the SuperFrost function,
- settings being adjusted by mistake (it
is only possible to deactivate the
safety lock).
This prevents the appliance being
switched off or settings adjusted with-
out your knowledge; for example, by
children.
Activating and deactivating the safety
lock
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the symbol lights up in the display.