Fully Integrated 24” MasterCool II K 2601 Vi / K 2611 Vi F 2601 Vi* / F 2611 Vi* KWT 2601 Vi / KWT 2611 Vi KWT 2661 ViS / KWT 2671 ViS Shown: KWT 2611 Vi Please note: This information is subject to change *The following models are not available in Canada : F 2601 Vi & F 2611 Vi 8miele.
Fully Integrated 24” MasterCool II SPECIFICATIONS Overall Unit Dimensions 233/4” (604 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche Minimum Cabinet Niche Opening Interior Volume 24” (610 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D K 26x1 Vi KWT 26x1 Vi F 26x1 Vi Refrigeration Volume ** ** 0 Freezer Volume 0 0 ** Chiller Volume Electrical 0 ** 0 K 26x1 Vi KWT 26x1 Vi F 26x1 Vi 110V / 120V, 60Hz, 15 Amps In the case
Fully Integrated 24” MasterCool II CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 24” MasterCool II POWER SUPPLY AND WATER CONNECTION (Water Connection For F 26x1 Vi Only) Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Fully Integrated 24” MasterCool II | K 26x1 Vi CUSTOM PANEL INSTALLATIONS Minimum 23 3/4” (604 mm) Minimum 3/4” (19 mm) outside frame 106 Pounds Page 5 of 12
Fully Integrated 24” MasterCool II | K 26x1 Vi DOOR PANEL DIMENSIONS KFP 2404 - Door Panel Available as an accessory for the following models: • K 26x1 Vi Page 6 of 12
Fully Integrated 24” MasterCool II | F 26x1 Vi CUSTOM PANEL INSTALLATIONS 23 3/4” (604 mm) in all cases Minimum 3/4” (19 mm) outside frame 143 Pounds Page 7 of 12
Fully Integrated 24” MasterCool II | F 26x1 Vi DOOR PANEL DIMENSIONS & DISPENSER CUTOUT KFP 2444 - Door Panel Available as an accessory for the following models: • F 26x1 Vi Page 8 of 12
Fully Integrated 24” MasterCool II | KWT 26x1 Vi(S) CUSTOM PANEL INSTALLATIONS 23 3/4” (604 mm)in all cases Minimum 3/4” (19 mm) outside frame 63 7/8” (1623 mm) max. 5 7/8” (140 mm) min. 137 Pounds 17 1/4” - 18 5/8” (439 - 473 mm) 2 1/2” - 3 1/4” (63.5 - 82.5 mm) Both Sides 10 1/8” (257 mm) min.
Fully Integrated 24” MasterCool II | KWT 26x1 Vi(S) DOOR PANEL DIMENSIONS KFP 2454 -Door Panel Available as an accessory for the following models: • KWT 26x1 Vi(S) Page 10 of 12
Fully Integrated 24” MasterCool II HINGING DETAILS 115° OPENING Available for the following models: • K 26x1 Vi • F 26x1 Vi • KWT 26x1 Vi(S) 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.4mm) 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) 0-3 /4” 1-1 1-1 /2” DOOR SWING AT 115° OPENING /4” (38 1” ( (32 mm 25 mm ) (19 mm 3”(76.2mm) 1-3/4”(44.
Fully Integrated 24” MasterCool II HINGING DETAILS 90° OPENING Available for the following models: • K 26x1 Vi • KWT 26x1 Vi(Si 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2” (51 mm) Handle or object that is NOT flush with Cabinet Front. 1-3/16” (30mm) 7/16” (11 mm) 0-1/8” (3 mm) 1-7/16” (36.5mm) 1-11/16” (43mm) 1-15/16” (49.
