Fully Integrated 18” MasterCool II F 2411 Vi F 2461 Vi* / F 2471 Vi Shown: F 2471 Vi merged with K 2801 Vi Please note: This information is subject to change *The following models are not available in Canada : F 2461 Vi 8miele.
Fully Integrated 18” MasterCool II SPECIFICATIONS Overall Unit Dimensions 173/4” (451 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche Minimum Cabinet Niche Opening 18” (458 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D Interior Volume F 24x1 Vi Freezer Volume * Electrical Electrical Requirements F 24x1 Vi 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separate outlet must be used for each appliance.
Fully Integrated 18” MasterCool II CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 18” MasterCool II POWER SUPPLY AND WATER CONNECTION Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Fully Integrated 18” MasterCool II | F 2411 Vi CUSTOM PANEL INSTALLATIONS Minimum 17 3/4” (451 mm) Minimum 3/4” (19 mm) outside frame 123 Pounds Page 5 of 9
Fully Integrated 18” MasterCool II | F 2411 Vi DOOR PANEL DIMENSIONS KFP1804 - Door Panel Available as an accessory for the following models: • F 2411 Vi Page 6 of 9
Fully Integrated 18” MasterCool II | F 2461 Vi / F 2471 Vi CUSTOM PANEL INSTALLATIONS 17 3/4” (451 mm) in all cases Minimum 3/4” (19 mm) outside frame 143 Pounds Page 7 of 9
Fully Integrated 18” MasterCool II | F 2461 Vi / F 2471 Vi DOOR PANEL DIMENSIONS & DISPENSER CUTOUT KFP 1844 - Door Panel Available as an accessory for the following models: • F 2461 Vi • F 2471 Vi Page 8 of 9
Fully Integrated 18” MasterCool II HINGING DETAILS 115° OPENING Available for the following models: • F 24x1 Vi 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.4mm) 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) 0-3 /4” 1-1 1-1 /2” DOOR SWING AT 115° OPENING /4” (38 1” ( (32 mm 25 mm ) (19 mm 3”(76.2mm) 1-3/4”(44.