Operating and Installation Instructions Gourmet Drawer To prevent accidents and machine damage, read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 4 Caring for the environment .............................................................................. 13 Overview............................................................................................................. ESW 7010, ESW 7110......................................................................................... ESW 7570, ESW 7580, ESW 7670, ESW 7680 ..................................
Contents Appliance warranty and product registration ...................................................... 44 MieleCare ........................................................................................................... 45 Installation.......................................................................................................... IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION ................................... Installation notes .............................................................
IMPORTANT SAFETY INSTRUCTIONS Please note that the Gourmet Drawer is referred to in these operating instructions as the drawer. This drawer complies with all current local and national safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating and installation instructions carefully before using the drawer. They contain important information on safety, installation, use, and maintenance. This prevents both personal injury and damage to the drawer.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This drawer is intended for domestic use and use in other similar environments. The drawer is not intended for outdoor use. The warming drawer is intended for domestic use only as described in these instructions. All other use is at the owner's own risk and could be dangerous. Persons who lack physical, sensory or mental abilities, or experience with the appliance should not use it without supervision or instruction by a responsible person.
IMPORTANT SAFETY INSTRUCTIONS Safety with children As with any appliance, close supervision is necessary when used by children. Do not leave children unattended: Children should not be alone or unsupervised in the area where the appliance is installed. Do not allow them to sit or stand on the appliance. Be sure to supervise any children in the vicinity of the drawer, and do not let them play with it. The drawer gets hot when in use and remains hot for quite a while after being switched off.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician. A damaged drawer can be dangerous. Always check for visible signs of damage. Never use a damaged appliance. Reliable and safe operation of the drawer can only be assured if it has been connected to the electrical supply.
IMPORTANT SAFETY INSTRUCTIONS Any repairs not performed by a Miele authorized service technician will void the warranty. Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer. If the plug has been removed or the power cord is not supplied with a plug, the drawer must be connected to the power supply by a suitably qualified electrician.
IMPORTANT SAFETY INSTRUCTIONS This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The construction of the device assures that the FCC exposure limits are verifiably met using the integrated WiFi module EK037.
IMPORTANT SAFETY INSTRUCTIONS Correct use You could burn yourself on the hot drawer or hot dishware. Protect your hands with heat-resistant pot holders or gloves when handling hot items. Do not let them get wet or damp. Heat transfers through damp and wet material more quickly with the risk of scalding or burning yourself. Risk of fire. Do not store any plastic containers or combustible objects in the drawer. They can melt or catch fire when the appliance is switched on.
IMPORTANT SAFETY INSTRUCTIONS Keeping Warm mode is to be used for keeping hot dishes warm, not for heating up cold food. Make sure that any food placed in the drawer is at a high enough temperature. In some foods, bacterial growth may occur if the temperature is too low. Set the appliance to an adequate warming temperature. Loose fitting or hanging garments present a fire hazard. Wear proper apparel while operating the appliance.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Danger of electric shock. The steam from a steam cleaner could reach live electrical components and cause a short circuit. Never use a steam cleaner for cleaning.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Overview ESW 7010, ESW 7110 a Non-slip liner b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front.
Overview ESW 7570, ESW 7580, ESW 7670, ESW 7680 e d a b c a Non-slip liner b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front.
Overview Controls and indicators Sensor buttons Displays/Indicator lights a On/Off sensor control For switching the drawer on and off f sensor control For setting a specific duration or reverting to continuous operation. b Remote sensor button For controlling the drawer via your mobile device c Menu sensor button For selecting the operating mode d Temperature sensor button For setting the temperature e Duration sensor button For setting a specific duration or reverting to continuous operation.
Overview Included accessories The accessories supplied with your appliance, as well as a range of optional ones, are available to order from Miele (see “Optional accessories”). Wire Rack For increasing the loading area (ESW 7570, ESW 7580, ESW 7670, ESW 7680). Non-slip liner For keeping dishware secure.
Before first use Remove any protective foil and stickers. Heating up the drawer for the first time Do not remove stickers carrying safety or installation information or the data plate. Heat the empty drawer for at least 2 hours. This makes it easier to perform servicing and repair work. Cleaning the drawer for the first time Remove the non-slip liner and (if present) the wire rack from the drawer. Clean both with warm water and liquid dish soap, applied with a soft sponge or microfiber cloth.
Before first use Miele@home Your drawer is equipped with an integrated WiFi module. To use this feature, you will need: - a WiFi network - the Miele app - a Miele user account You can create a user account via the Miele app. The Miele app will guide you as you connect your drawer to your home WiFi network.
Before first use Connecting via the app The Miele@mobile app can be used to connect to your network. If requested to activate the WiFi on the drawer, proceed as follows: Turn the drawer off. Install the Miele@mobile app on your mobile device. Press and hold the Duration sensor control. To log in you will need: At the same time, touch the Remote sensor control. 1. your WiFi network password 2. your drawer password Made in Germany Typ: ESWXXXX XX/XXX Fabr.- Nr. : 00 / XXX XXXXXXXXX / XXX M.
Before first use Connecting via WPS Your WiFi router must support WPS (WiFi Protected Setup). Signing out of WiFi (resetting factory defaults) Turn the drawer off. To set up a new WiFi connection, the existing WiFi connection must be disconnected. Press and hold the sensor control. Turn the drawer off. At the same time, touch the sensor control. Press and hold the sensor control. 2 h will light up constantly, 3 h will flash on and off.
Operation Using the appliance Malfunction can occur due to dirty and/or covered sensor buttons. The sensor buttons do not react or unintentional switching procedures result, perhaps even the automatic deactivation of the drawer. Keep the sensor buttons and indicators clean. Do not place anything over the sensor buttons or indicators. Damage caused by liquids. Liquids that get inside the drawer can cause a short circuit. Open and close a loaded drawer carefully to prevent liquids from spilling.
Operation Using MobileStart Risk of burning due to hot dish- Touch the sensor control to activate MobileStart. ware. Empty dishware will become very hot when heated using the Keeping food warm operating mode. Use pot holders when removing the dishware. The indicator light above the sensor control will light up. You can operate your drawer remotely with the Miele@mobile app. Operation via the sensor buttons has precedence over operation via the app.
Operation Temperature settings Each operating mode has its own temperature range. The factory default recommended temperatures are printed in bold. The temperature can be altered in 10°F (5°C) increments by touching the sensor control. The last temperature selected is automatically activated the next time the drawer is switched on, and this is shown in the control field (exception: Low temperature cooking).
Keeping food warm Tips To maintain your food’s optimum quality please note the following: - Place the hot food in pre-heated dishware. Place the dishware in the drawer while it is being pre-heated. - Do not cover roast or fried food which you want to keep crisp. These types of food need to be kept warm at a higher temperature. - Cover liquids and food with a high moisture content with a suitable lid or heat-resistant foil. This will prevent moisture escaping and condensing outside the dishware.
Keeping food warm Health risk caused by using too low a temperature. Bacteria may develop in the food if the temperature used for keeping food warm is too low. Only use the Keeping food warm operating mode. This operating mode is for keeping food warm which has just been cooked and is still hot. It is not for reheating food that has gone cold. Select the Keeping food warm operating mode. Select the desired duration. Pre-heat the drawer for approx.
Keeping food warm Settings Food Dishware Cover dishware Temperature for the setting Position Bottom Wire Rack* X Steak rare Plates No X Bakes/gratin Gratin dish Yes X Roasting Plates Yes X Stew Pot Yes X Fish strips Pan No X Meat in a sauce Pot Yes X Vegetables in sauce Pot Yes X Goulash Pot Yes X Mashed potatoes Pot Yes X Plates Yes X Baked potatoes/ new potatoes Plate/pot Yes X B
Warming dishes Tips - Spread the dishware out across the whole surface if possible. Stacks of plates heat up more slowly than individual pieces of dishware. If you cannot avoid stacking plates, place these at the front of the drawer. Use the wire rack (depending on model). - Do not place large serving dishes right up against the vents. They will cover the warm air outlets. The dishware will not heat up evenly.
Warming dishes ESW 7010, ESW 7110 The following loading examples are intended to serve as a guide: 6 place settings 6 dinner plates 10 1/4" (26 cm) 6 deep soup plates 9 1/16" (23 cm) 6 dessert plates 7 1/2" (19 cm) 1 oval platter 12 5/8" (32 cm) 1 serving bowl 6 5/16" (16 cm) 1 serving bowl 5 1/8" (13 cm) Or one of the following arrangements: 12 dinner plates 10 1/4" (26 cm) 18 deep soup plates 9 1/16" (23 cm) 16 soup bowls 4" (10 cm) 6 dinner plates and 6 deep soup plates
Warming dishes ESW 7570, ESW 7580, ESW 7670, ESW 7680 The following loading examples are intended to serve as a guide: 12 place settings 12 dinner plates 10 1/4" (26 cm) 12 deep soup plates 9 1/16" (23 cm) 12 dessert plates 7 1/2" (19 cm) 1 oval platter 12 5/8" (32 cm) 1 serving bowl 7 1/2" (19 cm) 1 serving bowl 6 5/16" (16 cm) 1 serving bowl 5 1/8" (13 cm) Or one of the following arrangements: 40 dinner plates 10 1/4" (26 cm) 60 deep soup plates 9 1/16" (23 cm) 45 soup b
Low temperature cooking With Low temperature cooking, food is cooked at a low temperature over a long period of time. Using this method, food loses less liquid as it is cooked gently and so remains succulent and tender. If food probes from other Miele Builtin Appliances are used in the drawer, they may affect the built-in appliances. Only use the Miele Built-in Appliance Food Probe with the built-in appliance that it was supplied with.
Low temperature cooking Using the Low temperature cooking operating mode Tips Select the Low temperature cooking operating mode. - Do not cook the food all the way through. Sear the food again after cooking. Place the heat-resistant dishware in the bottom of the drawer. - The food can be sliced straight away. It does not need to rest. The drawer will pre-heat automatically for 15 minutes and then operate at the preset temperature of 185°F (85°C) for a preset time of 4 h.
Low temperature cooking Pre-heat the cooking container for 15 minutes. In this time, rest the food at room temperature. Place the food into the pre-heated cooking container in the compartment. The cooking durations given in the charts are guidelines only. The food can be cooked further if required. Beef cooking chart [min] Medallions 1 per side 115-125 (45–50) 1 1/4"-1 1/2" (3–4 cm) 1–2 per side 130-140 (55–60) thick 2 per side 150 (65) 45–60 65–80 95–110 Sirloin steak approx. 0.
Low temperature cooking Pork cooking chart Type of meat [min] * °F [°C] [min] Tenderloin approx. 19 1/2 lb (550 g) 6–8 total 145 (60) 90–110 Medallions approx. 1 1/2" (4 cm) thick 2 per side 145 (60) 85–100 145°F (65°C) = well done Searing time, Core temperature, Cooking duration, Temperature setting Lamb cooking chart [min] * °F [°C] [min] Rack of lamb approx. 1/4 lb (170 g) 2–4 2–4 135 (60) 150 (65) 45–60 85–100 Rack of lamb approx.
Low temperature cooking Fish cooking chart Type of fish [min] °F [°C] [min] Salmon 0.8 lb (400 g) 2 on the skin side 126 (52) 45–60 Trout (whole) approx. 3/4 lb (350 g) 2 per side 126 (52) 15–30 Cod/skrei 0.4 lb (200 g) No searing 126 (52) 75–90 Sea bream (whole) approx. 1-1.1 lb (480– 500 g) 2 per side 126 (52) 25–40 Branzino (whole) approx. 1-1.
Other uses Food Cookware Cover dishes Defrosting berries Bowl/plate No 0:50 Dissolving gelatin Bowl No 0:15 Proofing Bowl Yes, with plate 0:30 Preparing yogurt Yogurt jars with lids – 5:00 Pot Yes, with lid 0:40 Melting Chocolate Bowl No 0:20 Defrosting vegetables Bowl No 1:00 Soaking rice pudding Temperature setting / Temperature setting / Duration 36 [h:min]
Networking with Miele Built-in Appliances Networking enables the drawer to operate automatically depending on the operational state of another Miele Built-in Appliance. Example: The drawer pre-heats dishware at the right time before or after using the networked built-in appliance. Prerequisites The following conditions must be met for networking the drawer with other built-in appliances: - The drawer is connected to the household WiFi network via Miele@home.
Sabbath mode To comply with religious requirements, the drawer can be programmed for the duration of the Sabbath. This mode will be switched off automatically after about 24 or 72 hours, depending on the setting, and normal operation will resume. When this function is activated, the duration setting is deactivated and the sensor controls must be touched for longer than usual. Activating Sabbath mode Duration of 24 hours If necessary, switch the drawer off. Press and hold the sensor control.
Cleaning and care Risk of damage due to moisture Danger of burning from hot inte- ingress. The steam from a steam cleaner could reach live electrical components and cause a short circuit. Do not use a steam cleaner to clean the drawer. rior. The interior of the drawer will be hot after use. Allow the drawer to cool down to a safe temperature before cleaning. All surfaces could be discolored or damaged if unsuitable cleaning agents are used. All surfaces are susceptible to scratching.
Cleaning and care Cleaning the drawer front and interior Malfunction can occur due to dirty and/or covered sensor buttons. The sensor buttons do not react or unintentional switching procedures result, perhaps even the automatic deactivation of the drawer. Keep the sensor buttons and indicators clean. Do not place anything over the sensor buttons or indicators.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Problem Possible cause and solution The drawer does not heat up. The electrical plug is not properly inserted. Insert the electrical plug. The breaker has tripped.
Frequently Asked Questions Problem Possible cause and solution The dishware is too hot. The Warm Dishes/Plates or Warm Cups/ Glasses operating mode was not selected. Set the correct operating mode. The temperature setting is too high. Select a lower temperature. Abrasion marks on the top edge of the front panel. 42 Installing or removing an appliance above the drawer has caused abrasion marks.
Optional accessories Miele offers a range of useful accessories, as well as cleaning and conditioning products for your appliance. Wire Rack These products can be easily ordered from the Miele webshop. These products can also be ordered from Miele Technical Service (see the end of these operating instructions) or your Miele dealer. For increasing the loading area (ESW 7570, ESW 7580, ESW 7670, ESW 7680). Non-slip liner For keeping dishware secure.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
MieleCare This service is available in USA only. MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory trained professionals can guarantee the safety, reliability, and longevity of your Miele appliance.
*INSTALLATION* Installation IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION Risk of damage caused by incorrect installation. Incorrect installation can cause damage to the drawer and/or the combination appliance. The appliance must only be installed by a qualified person. The electrical outlet must be easily accessible after the installation of the drawer. The drawer may only be built in combination with those appliances specified by Miele as being suitable.
*INSTALLATION* Installation Installation notes The drawer is available in 3 models, which differ in height. The building-in dimensions for the drawer must be added to the building-in dimensions for the combination appliance to establish the niche size required.
*INSTALLATION* Installation Installation dimensions ESW 7010, ESW 7110 Combination with an H 2840 or CVA/DGC/H 7x4x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Combination with a DGC/H 7x6x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Side view 50
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 2 51/64 in² / 1,800 mm²) for power cord, water hoses, and ventilation ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet.
*INSTALLATION* Installation Installation dimensions ESW 7570, ESW 7670 Combination with a CVA/DGC/H 7x7x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Combination with a DGC/H 7x8x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Side view 54
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 2 51/64 in² / 1,800 mm²) for power cord, water hoses, and ventilation ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet.
*INSTALLATION* Installation Installation dimensions ESW 7580, ESW 7680 Installation in a tall or base cabinet Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Side view 57
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 2 51/64 in² / 1,800 mm²) for power cord, water hoses, and ventilation ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet.
*INSTALLATION* Installation Installation Check that the base on which the drawer will sit is clean and level (use a level). This is important for the appliance to function correctly. Push the drawer into the housing unit until the drawer front is flush with the housing unit and make sure that it is correctly aligned in the unit. Open the drawer and use the 2 screws supplied to secure it to the side walls of the cabinet.
*INSTALLATION* Installation Electrical connection ATTENTION: Before installation or servicing, disconnect the power supply by either removing the fuse, manually “tripping” the circuit breaker or unplugging the appliance. Pull the plug not the cord. Installer: Please leave these instructions with the customer. Connection Make sure that the connection data on the data plate matches that of your electricity supply.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Customer Service & Support Phone: 888-99-MIELE(64353) info@mieleusa.com www.mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
ESW 7010, ESW 7110, ESW 7570, ESW 7580, ESW 7670, ESW 7680 en-US M.-Nr.