Operating and Installation Instructions

Installation
35
8
5
/
8
"
220 mm
8
5
/
8
"
220 mm
dai3435aus
 Draw two intersecting lines on the
ceiling.
 For vented mode:
– Place a section of the exhaust duct‐
ing in the ceiling and feed it down
thr
ou
gh the cross-sectional area as
illustrated. Exhaust ducting of ap‐
prox. 27 9/16" (700 mm) length is re‐
quired between the ceiling and the
hood exhaust socket.
– Secure the exhaust ducting to the ex‐
haust
socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
 Place the power cord and guide it
thr
ough the ceiling in the area shown.
A power cord approx. 27 9/16"
(700 mm) in length is required be‐
tween the ceiling and the hood con‐
nectors.