Operating and Installation Instructions

Cleaning and care
29
 If the filters have been installed incor‐
r
ectly, you can insert a small screw‐
driver into the slit to disengage the
locking clip.
Resetting the filter saturation indica‐
tor for the g
rease filter
Once cleaning is complete, the filter
saturation indicator must be reset.
 While the fan is turned on, press the
gr
ease filter button  for approx. 3
seconds, until only the 1 is flashing.
The grease filter symbol  goes out.
When cleaning the grease filters before
the full operati
ng time has elapsed:
 Press the grease filter button  for
appr
ox. 6 seconds, until only the 1 is
flashing.
OdorFree Charcoal Filter
If the hood is equipped for recirculation,
an OdorFr
ee Charcoal Filter must be in‐
stalled in addition to the grease filters.
This filter is designed to absorb odor-
causing agents and is mounted in the
canopy above the grease filters.
OdorFree Charcoal Filters are available
from your Miele dealer or from Miele.
See "Technical data" for the type and
reference number.
Installing/replacing the OdorFree
Charc
oal Filter
 To install or replace the OdorFree
Cha
rcoal Filter, the grease filters must
first be removed as described above.
 Remove the OdorFree Charcoal Filter
from its packaging.
 Press the OdorFree Charcoal Filter in‐
t
o the frame.
 Reinstall the grease filters.
 When installing the fil
ter for the first
time, activate the filter saturation
counter (see "Operation").