Operating and Installation Instructions

Operation (Automatic and Manual modes)
24
Activating/changing the OdorFree
Charc
oal Filter operating hours
counter
The OdorFree Charcoal Filter is required
for extr
action mode.
The operating hours counter for the
OdorFr
ee Charcoal Filter requires one-
time activation and must be set to
match your cooking habits.
 Press the On/Off button 
to turn the
fan off.
 Tap the delayed shut-down button 
and the OdorF
ree Charcoal Filter but‐
ton  at the same time.
The OdorFree Charcoal Filter symbol 
and one of the fan setting indicat
ors will
flash.
The indicators 1 t
o
IS show the current
time setting:
Indicator 1 .............................
120 hours
Indicator 2..............................
180 hours
Indicator 3 ............................. 240 hours
Indicator IS.......................... deactiva
ted
 Tap the relevant button to select the
time r
equired.
 Confirm your choice by tapping the
OdorFr
ee Charcoal Filter button .
All the indicator lights go out.
If the setting is not confirmed within 4
minut
es, the old setting is retained.
Checking the filter saturation indica‐
tor
Before the set operating time has run
out, you can
check what percentage of
the time has elapsed.
 Press the On/Off button 
to turn the
fan on.
 Press and hold the grease filter but‐
t
on  or the OdorFree Charcoal Fil‐
ter button .
One or more of the power level indica‐
tors will flash.
The number of flashing indicators
shows the elapsed operating
hours as a
percentage.
Indicator 1 .....................................
25%
Indicators 1 and 2 .........................
50%
Indicators 1 t
o
3 ............................ 75%
Indicators 1 to
IS ......................... 100%
The elapsed operating hours remain
stored in the memory when the hood
is turned off or if power to the appli‐
ance is lost.