Manual & Installation Guide

Cleaning and care
28
Resetting the filter saturation counter
for the grease filters
Once cleaning is complete, the filter
saturation counter must be reset.
 While the fan is turned on, press the
filter saturation indicator  for
approx. 3 seconds until 1 is the only
indicator flashing.
The grease filter symbol  goes out.
When cleaning the grease filters before
the full operating time has elapsed:
 Press the filter saturation indicator
 for approx. 6 seconds until 1 is
the only indicator flashing.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
OdorFree Charcoal Filter
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odors.
They are fitted into the canopy above
the grease filters.
Charcoal filters are available from your
Miele dealer or from Miele. See
"Technical data" for the type and
reference number.
Installing/replacing the charcoal
filters
 Before installing or replacing the
charcoal filters, you must first remove
the grease filters (see previous
section for instructions).
 Take the charcoal filters out of their
packaging.
 Press the filters into the frame.
 Reinstall the grease filters.
 When installing the filter for the first
time, activate the filter saturation
counter (see "Operation").