Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions .......................................................................... 4 Caring for the environment ................................................................................. 13 Guide to the appliance......................................................................................... 14 Modes of operation.............................................................................................. 16 Operation .........................................
Contents Technical data ......................................................................................................
Warning and Safety instructions This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on the safety, installation, use and maintenance of the appliance. Miele cannot be held liable for non-compliance with these instructions.
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the cooker hood unless they are constantly supervised. Children 8 years and older may only use the cooker hood unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation. Children must not be allowed to clean or maintain the cooker hood unsupervised.
Warning and Safety instructions Technical safety Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance. The electrical safety of this appliance can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met.
Warning and Safety instructions For safety reasons, this appliance may only be used after it has been built in. The cooker hood must not be used in a non-stationary location (e.g. on a ship). Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults. Only open the housing as described in the instructions given in the installation sheet and in the Cleaning and care section of this booklet.
Warning and Safety instructions Using at the same time as other heating appliances that depend on the air from the room Warning - danger of toxic fumes Great care should be taken when using the cooker hood at the same time and in the same room or area of the house as another heating appliance which depends on the air in the room.
Warning and Safety instructions In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heater are in operation simultaneously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible.
Warning and Safety instructions Correct use Never use a naked flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over a naked flame. When switched on, the cooker hood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard. The cooker hood can become damaged when exposed to excessive heat. – When using the cooker hood over a gas hob, ensure that any burners in use are always covered by a pan.
Warning and Safety instructions Do not use the cooker hood without the filters in place. This way you will avoid the risk of grease and dirt getting into the appliance and hindering its smooth operation. The filters should be regularly cleaned or changed as appropriate. Saturated filters are a fire hazard. The cooker hood can get very hot during cooking due to heat rising from the hob. Do not touch the housing or the grease filters until the cooker hood has cooled down.
Warning and Safety instructions Exhaust ducting must be of non-inflammable material. Suitable material is available from Miele specialist dealers or the Miele Spares Dept. The appliance must not be connected to a chimney or flue which is in use. Neither should it be connected to ducting which ventilates rooms with fireplaces. If exhaust air is to be extracted into a chimney or ventilation duct no longer used for other purposes, seek professional advice.
Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Guide to the appliance 14
Guide to the appliance a Telescopic extension piece b Tower c Canopy d Controls e Grease filter f Recirculation grilles (only for recirculation mode) g Hob lighting h Charcoal filter (special accessory for recirculation mode) i On/Off control for the fan j Controls to select the fan power level k On/Off control for the hob lighting 15
Modes of operation Depending on the model of the cooker hood, the following options are available: Recirculation mode (requires purchase of conversion kit and charcoal filter: see "Technical Data") Extraction mode The air is drawn in and cleaned by the grease filter and directed outside. Non-return flap The non-return flap is designed to prevent the exchange of room and outside air taking place. The flap is closed when the cooker hood is switched off.
Operation Switching the fan on Press the On/Off control . Automatic switch-off of the Intensive setting The fan will switch on at level 2. The symbol and 2 will light up in the power level display. You can set the Intensive setting so that it only runs for 10 minutes before reverting automatically to level 3. Selecting the power level To set this option, both the fan and the hob lighting must be switched off. For light to heavy cooking vapours and odours, select from power levels 1 to 3.
Operation Switching the fan off Use the On/Off control to switch the fan off. The symbol will go out. Switching the hob lighting on / off The hob lighting can be switched on and off independently of the fan. To do this, press . The symbol will light up when the hob lighting is switched on. Safety switch-off Should the cooker hood be left on, the fan will switch off automatically after 10 hours. The lighting will remain on. Pressing the On/Off control will switch the fan back on again.
Energy saving tips This cooker hood operates very efficiently and economically. The following will help you to save even more energy when using it: – Ensure that there is sufficient ventilation in the kitchen when cooking. In extraction mode, if there is insufficient air flow the cooker hood cannot operate efficiently and this causes increased operating noise levels. – Always cook with the lowest possible setting.
Cleaning and care Casing General information The surfaces and controls are susceptible to scratches and abrasion. Please observe the following cleaning instructions. All external surfaces and controls can be cleaned using hot water with a small amount of washing-up liquid applied with a well wrung-out soft sponge or cloth. Do not let moisture get into the cooker hood. Only use a damp cloth when cleaning. This is particularly important around the controls.
Cleaning and care Important for the controls Do not leave soiling on the controls for any length of time. Otherwise they may suffer discolouration or damage. Remove soiling straight away. Please observe the general notes on cleaning earlier in this section. Do not use stainless steel cleaning agents on the controls. Important for appliances with glass surfaces Glass surfaces can be cleaned using a proprietary non-abrasive cleaning agent designed specifically for use on glass.
Cleaning and care Use a proprietary household dishwasher detergent. Select a dishwasher programme with a wash temperature between 50°C and 65°C. To take out a grease filter, release the locking clip on the filter, lower the filter approx. 45°, unhook it at the back and remove it. Cleaning the grease filter by hand Clean the filter with a soft nylon brush in a mild solution of hot water and a small amount of washing-up liquid. Do not use "neat" washing up liquid.
Cleaning and care Charcoal filter If the cooker hood is connected for recirculation, a charcoal filter must be inserted in addition to the grease filter. This is designed to absorb cooking odours. It is fitted in the canopy above the grease filter. Replacement charcoal filters can be obtained from your Miele retailer or via the internet at www.miele-shop.com. See back of manual for contact details, and "Technical data" for type and reference number.
Cleaning and care Changing a halogen lamp The halogen lamp gets very hot during operation. It can cause burns even after being switched off for some time! Wait a few minutes before replacing a lamp. Remove the grease filter. Remove the charcoal filter if the cooker hood is being used in recirculation mode. Disconnect the cooker hood from the mains electrical supply before replacing the lamp. Push the button above the lamp down a little. Turn the halogen lamp anti-clockwise and pull it out.
Installation Before installation Before installation, it is important to read the information given on the following pages as well as the "Warning and Safety instructions" at the beginning of this booklet. Protective foil The housing components have protective foil around them to protect them from transport damage. Dismantling Should the appliance ever need to be dismantled, follow the installation instructions in reverse order as described on the installation sheet.
Installation Assembly parts 26
Installation a 3 protective sheets for use when fitting the tower b 1 exhaust connection for exhaust ducting 150 mm c 1 reducing collar for exhaust ducting 125 mm d 1 non-return flap for fitting into the exhaust connection on the motor unit (not needed for recirculation mode) e 2 protective spacers for use when fitting the tower f Wall bracket for securing the cooker hood to the wall g Conversion kit for recirculation mode including directional unit and flexible aluminium hose (the conversion kit is not
Installation Appliance dimensions The diagram is not drawn to scale.
Installation a Extraction b Recirculation c Ventilation grille positioned at the top for recirculation de (only d is required for recirculation mode cooker hoods): The shaded area represents the wall or ceiling area for the vent cut-out, for fitting the connection socket and on EXT models for feeding the connection cable through to the external motor. Recirculation mode cooker hoods only require an electrical connection socket.
Installation Installation recommendations – When deciding on the safety distance between the hob and cooker hood, please note that a distance of 650 mm above electric cookers/hobs may be preferable to give more working space under the hood. Drilling diagram for wall mounting Please follow the directions given in the installation instructions supplied for drilling. – Account should also be taken of the height of the person who will be using the hood most often.
Connection for air extraction If this cooker hood is used at the same time as a heating appliance that relies on oxygen from the same room there is a risk in certain circumstances of toxic fumes building up. It is essential that the "Warning and Safety" instructions are observed. The cooker hood should be installed according to local and national building regulations. Seek approval from the building inspector where necessary. – Ensure that all connections are strong and airtight.
Connection for air extraction Condensate trap In addition to insulating the exhaust ducting, we recommend that a suitable condensate trap is also installed to collect and evaporate any condensate which may occur. Condensate traps for 125 mm or 150 mm ducting are available as optional accessories. When installing a condensate trap, ensure that it is positioned vertically and if possible directly above the exhaust socket. The arrow on the housing indicates the direction of air-flow.
Connection for air extraction Recirculation mode The silencer needs to be positioned between the exhaust socket and the directional unit . Ensure there is adequate space for fitting it. Extraction mode with external motor To minimise noise from the motor in the kitchen, the silencer should be positioned in front of the external motor if possible, or, if the ducting is long, above the exhaust socket on the cooker hood .
Electrical connection All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable. Ensure power is not supplied to the appliance until after installation or repair work has been carried out.
After Sales / Guarantee In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or the Miele Service Department. Contact details for Miele are given at the back of this manual. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. When contacting your dealer or Miele, please quote the model and serial number of your appliance. These are shown on the data plate.
Technical data Fan motor* Hob lighting Total connected load* Voltage, frequency 200 W 1 x 50 W 250 W AC 230 V, 50 Hz Fuse rating Mains connection cable length 5A 1.
Technical data Data sheet for domestic cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
Technical data Data sheet for domestic cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
Technical data Data sheet for domestic cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.miele.com.au China Miele (Shanghai) Trading Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District 200040 Shanghai, PRC Tel: +86 21 6157 3500, Fax: +86 21 6157 3511 E-mail: info@miele.
DA 5966 W DA 5996 W DA 5996 W EXT en-GB M.-Nr.
