Operating and Installation Instructions Built-in Coffee System To prevent accidents and machine damage, you absolutely must read these instructions before installation or use. en – US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5 Preparing your appliance for an extended vacation.............................................. 15 SAVE THESE INSTRUCTIONS .............................................................................. 15 Guide to the appliance ....................................................................................... 16 Front view ............................................................................
Contents Resetting drinks .................................................................................................. 42 User profiles......................................................................................................... Accessing a user profile ........................................................................................ Creating a profile ................................................................................................... Selecting a user profile........
Contents Waste unit.............................................................................................................. Main dispenser ...................................................................................................... Sensor cover ......................................................................................................... Maintenance of the milk valve............................................................................... Milk flask with lid ................
IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage. Read this safety information carefully before operating the appliance. They contain important information on the safe installation, operation, and care of your coffee system.
IMPORTANT SAFETY INSTRUCTIONS Intended use Use this coffee system only in standard household environments for making coffee beverages such as espresso, cappuccino, latte macchiato, etc. Any other type of use is not permitted. The coffee system is not suitable for outdoor use. The machine is intended only for the preparation of coffee-based drinks such as espresso, cappuccino, latte macchiato etc. Any other usage is not supported.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Caution! Danger of burning and scalding on the dispensing dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee system or place parts of their body under the dispensing dispensers. Keep the coffee system out of reach of children. Children must be kept away from the machine unless they are constantly supervised.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation and repairs may only be carried out by a Miele-authorized service technician. Installation, repairs and other work by unqualified persons can cause considerable danger to users. A damaged coffee system could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
IMPORTANT SAFETY INSTRUCTIONS Do not cover or block the aeration and ventilation cross-sections. Condensation water can damage the coffee system or surrounding cabinets. Ensure that there is sufficient ventilation around the coffee system. The ventilation gaps in the housing unit and the gap between the top of the housing unit and the ceiling must be at least 78 3/4" (200 cm2). Otherwise condensation can build up and damage the machine or the housing unit.
IMPORTANT SAFETY INSTRUCTIONS Defective components should be replaced by Miele original parts only. Only with original Miele parts can the manufacturer guarantee the safety of the appliance. Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock. Use only genuine original Miele parts.
IMPORTANT SAFETY INSTRUCTIONS Plumbing Do not connect the coffee system to a hot water supply. The non-return valve must be easily accessible when the coffee system is built in. The protective sleeve of the water intake hose must not be damaged or become kinked. This will cause it to leak. The integrated Waterproof System offers protection from water damage, provided the following conditions are met: – the coffee system is correctly installed, connected to the electrical supply and plumbed in.
IMPORTANT SAFETY INSTRUCTIONS Proper use Danger of burning and scalding from the dispensers. The liquids and steam dispensed are very hot. Please note: – Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. – Do not touch hot components. – Hot liquid or steam could spatter from the dispensers. Ensure that the main dispenser is clean and fitted correctly. – Water in the drip tray can also be very hot. Take care when emptying it.
IMPORTANT SAFETY INSTRUCTIONS Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain a certain amount of residual moisture. These can damage the coffee system grinder as soon as grinding begins. Do not use coffee beans that have been treated with caramel, sugar or other substances. Sugar will damage the coffee system. Only add ground coffee or cleaning tablets to the ground coffee chute.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and care The coffee system must be disconnected from the electrical supply before cleaning or maintenance. Clean the coffee system and the milk flask thoroughly before using for the first time (see "Cleaning and care"). All parts of the milk system need to be cleaned thoroughly and regularly. Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on stainless steel surfaces. These damage the surface, causing it to lose its dirt repellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching.
Guide to the appliance Front view a On / Off button b Touch display c Back sensor button d Door handle e Hot water dispenser f Drip tray cover g Main dispenser, with automatic height-adjustment and lighting h Milk flask with lid 16
Guide to the appliance Interior view i Ground coffee chute cover j Brew unit k Ground coffee chute l Grind control lever m Coffee bean container n Water tank with intake device o Drip tray with no-spill grid p Waste unit q Drip catcher r Main dispenser connector s Service cover 17
Accessories Additional accessories are available. Contact Miele or visit the Miele website for more information. These products and other useful accessories can be ordered via the Miele website. – Main dispenser connector cap Spare part Miele online shop: mielestore.
Operation Touch display The touch display can be scratched by pointed or sharp objects, e.g. pens and pencils. Only touch the touch display with your fingers. Touching the display with your finger emits a small electrical charge which in turn triggers an electrical pulse that is detected by the surface of the touch display. The touch display does not react when you touch it with objects. If your fingers are cold, the touch display may not react. The touch display is divided into three areas.
Operation Operating actions Each time you tap a possible option, the relevant field will light up orange. To select or open a menu Tap the desired field to select it. Scrolling You can scroll to the right or the left. Some menu options allow you to scroll up and down too. Swipe the screen, i.e. place your finger on the touch display and swipe it in the direction you want. Or: Tap the or arrows to scroll to the left or to the right in the display.
Operation The numerical keypad will appear. Tap the desired numbers. Once you have entered an accepted value, OK will light up green. Tap OK. Entering letters Profile names or the names for your own drinks are entered using a keyboard. It is best to select short names. Select the required letters or characters. Tap Save.
Operation Help When maintenance programs are selected, a context help appears in the bottom line Help. To display the information with images and text, tap Help. To return to the maintenance program, tap Close.
Operation Symbols in the display The following symbols can appear in addition to the text and the drinks symbols: Symbol Description Settings, e.g., the brightness of the display or the volume of the buzzer and keypad tones, are selected via a bar chart. This indicates information and instructions about operating the coffee system. Confirm the messages with OK. The system lock is active (see "Settings – Locking the coffee system (System lock ): The coffee system cannot be operated.
Before using for the first time Before using the coffee system for the first time, please read these instructions and make yourself familiar with the appliance and its controls. Setting the language Select the language and then tap OK. Select the location and then tap OK. The setting is now saved. Before using for the first time Install the coffee system and connect it to the electrical supply (see "Electrical connection" and "Installation").
Before using for the first time Select the water supply (Main Water) Water hardness The coffee system is intended for operation with a water connection. You can select the water supply from the following possibilities: The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee system will need to be descaled.
Before using for the first time Determining the water hardness You can measure the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area. Dip the test strip in your drinking water for approximately one second, then shake off any excess water. The result will be evident after about a minute. Setting the water hardness level Tap Settings.
Filling the water tank Change the water every day to prevent a build-up of bacteria. If the coffee system is plumbed into the water supply, the water tank will fill automatically as soon as the machine is switched on. The intake device in the lid ensures that the water is taken in slowly. If the coffee system has not been used to make any drinks for a long time, the water is left in the supply hose. This can impair the taste of the coffee. Discard the first full container of water.
Filling the coffee bean container Fill the coffee bean container with roasted coffee or espresso beans if you want to use freshly ground coffee beans for each cup of espresso or coffee. Alternatively, you can make coffee or espresso with ground coffee (see "Making coffee drinks from ground coffee"). Important! Risk of damage to the grinder. Only put roasted coffee or espresso beans in the container. Anything else, including ground coffee, will damage the grinder. Do not pour liquids in the bean container.
Turning the machine On and Off Turning on Turning off When the coffee system is switched on, it heats up and rinses the pipework. This not only cleans the pipework, but also warms it before coffee is prepared. Tap the On / Off button . If the coffee system still has an operating temperature higher than 140°F (60°C), rinsing will not take place. After a coffee has been dispensed, the machine pipework is rinsed before the machine switches off.
Dispenser adjustment The height of the main dispenser cannot be manually adjusted. The coffee system automatically detects the height of the cup or glass underneath the main dispenser. When a drink is requested, the main dispenser moves into the correct position before the drink is prepared. Make sure that you do not leave a spoon or other utensil in the cup as the height of the cup will be incorrectly determined. Turning the dispenser adjustment on and off The Drinks menu is displayed.
Preparing beverages Danger of burning and scalding Making a coffee drink from the dispensers. The liquids and steam dispensed are very hot. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. You can choose from a variety of specialty coffees: – Espresso is a strong, aromatic coffee with a thick hazelnut-brown cream layer – the crema – on top. Use espresso-roasted coffee beans for preparing espresso.
Preparing beverages Double portion You can request two portions of espresso or coffee at once in one cup or in two separate cups simultaneously. To fill two cups at the same time: Coffee pot: Preparing several cups of coffee one after the other You can automatically prepare several cups of coffee one after the other (max.1 l) using the Coffee Pot function. Up to eight cups can be prepared at the one time. The Drinks menu is displayed. Place a sufficiently large container under the main dispenser.
Preparing beverages Making coffee drinks from ground coffee Open the appliance door. To make espresso or coffee using ground coffee, add a portion of ground coffee to the ground coffee chute. This gives you the option of preparing a cup of decaffeinated coffee, for example, even though the coffee bean container is filled with roasted coffee beans. The coffee system will automatically recognize that ground coffee has been placed in the chute.
Preparing beverages Making coffee drinks from ground coffee If you want to make a drink with ground coffee: Tap Yes. You can now select which type of drink you would like to make with ground coffee. Place a cup under the main dispenser. Select a drink. Drinks with milk Danger of burning and scalding from hot steam coming out of the main dispenser! The liquids and steam dispensed are very hot. Only use plain milk. Most sugary additives can clog the milk lines. and damage the machine.
Preparing beverages Notes on the milk flask Milk is not cooled in the milk flask. Therefore, place the milk flask in the refrigerator if you are not going to use milk for a while. Good milk froth can only be achieved when cold milk (below 50°F / 10°C) is used. Push the milk flask into the coffee system. Preparing drinks with milk The Drinks menu is displayed. Place a suitable container under the main dispenser. a Lid Select the desired drink.
Preparing beverages Preparing hot water Caution! Danger of burning and scalding. The water dispensed is very hot. Preparing user profile drinks If you have already created a user profile (see "User profiles"), you can select it before preparing a drink. The Drinks menu is displayed. Tap Profiles and select the user profile you want. Place a suitable container under the hot water dispenser. The name of the user profile and the created drinks will appear in the display. Select Hot Water.
Preparing beverages After a drink has been prepared appears in the display a few minutes after a drink with milk has been prepared. Start rinse cycle Tap OK. The milk pipework will now be rinsed. Even if you do not confirm the message with OK, the milk pipework will automatically be rinsed after some time. Tip: Remove the milk flask, rinse the cover under running water, and close the milk flask using the compact cap. Cool the milk until the next time you use it.
Coffee the way you like it In order to customize the coffee system to the type of coffee being used, you can – Change the grinder setting – Change the amount of coffee – Set the brewing temperature – Pre-brew the coffee powder To avoid damaging the grinder, please note the following: Only adjust the grinder one setting at a time. Grind the coffee beans again if you want to adjust the grinder to the next setting. Open the appliance door.
Coffee the way you like it Changing the parameters of a drink You can change the amount of coffee, pre-brewing and the brewing temperature for each drink. The Drinks menu is displayed. Tap Edit or select Make drinks. Tap Change drink. Amount of coffee The coffee system can grind and brew 6-14 g of coffee beans per cup. The greater the quantity, the stronger the coffee. There are various ways to tell whether the amount of coffee is set correctly. The amount of coffee is too low, if Select a drink.
Coffee the way you like it Brewing temperature Pre-brewing ground coffee The ideal brewing temperature will depend on: When the pre-brewing function is turned on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee. – the type of coffee, – whether an espresso or a coffee is being prepared, and – the altitude of the region.
Portion size The flavor of the coffee produced depends not just on the type of coffee used, but also on the amount of water used. You can program the amount of water to suit the size of your cups and the type of coffee you are using. For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed with these drinks. Additionally, you can set the portion sizes for hot milk and milk froth alone.
Resetting drinks You can reset drink portions and parameters for all drinks to the factory default. The Drinks menu is displayed. Tap Edit and then Reset drinks. Reset all drinks to default? display. Tap Yes.
User profiles If the coffee system is used by several people with different coffee preferences, you can create individual user profiles in addition to the Miele profile. Creating a profile In each user profile, you can make settings for individual drinks (portion size, amount of ground coffee, brewing temperature and pre-brewing). Select the name you want using the keyboard and tap OK. The name of the current user profile is shown at the top left of the display.
User profiles Changing a user profile You can set up the coffee system so that after each use it automatically reverts back to the Miele standard user profile, or it retains the last selected user profile. Select Edit and then Change profile. You now have the following options: – Manually: The selected user profile will be retained until you select another user profile manually. – After each use: The machine will change back to the Miele standard user profile automatically after a drink is dispensed.
User profiles: Creating and editing your own drinks You can create your own drinks for each user profile and, for each drink, you can adjust the portion size and other parameters, e.g., amount of coffee, temperature. You can also change the names of your drinks and delete any unwanted drinks from your user profile. A maximum of nine drinks can be saved under one user profile. First call the desired user profile: The new drink will appear in the current user profile.
MyMiele You can display drinks you make frequently, drinks from profiles, and preferred maintenance programs in the MyMiele screen. Deleting entries The MyMiele screen can be set to appear as the start screen (see "Settings Start screen"). The MyMiele screen will then appear when the coffee system is turned on. Select the entry and then tap OK. Tap Edit. Select Delete entry. The entry will be deleted.
Settings You can use the "Settings" menu to customize the coffee system to suit your individual requirements. Accessing the "Settings" menu Changing and saving settings Tap Main Menu or Back. Select Settings. The Drinks menu is displayed. Select the option you want to change. Tap Main Menu or Back. Change the setting and tap OK. Select Settings. The setting is now saved. Now you can check or change the settings. You can recognize currently selected settings by the color frame.
Settings Setting options The factory default for each option is indicated by *.
Settings Menu item Available settings Start Screen Main Menu Drinks Profiles MyMiele Info Number of drinks – / Espresso / Coffee / Lungo Coffee / / Latte Macchiato / Caffè Latte / Milk Froth / Total coffee drinks Cappuccino Hot Milk / Hot Water No.
Settings Language Clock type You can select the language (and location variant of that language) for all dis-play text. You can display the time of day in an Tip: If you select the wrong language by mistake, you can find the "Language" option by following the flag symbol . analog or Time of day You can set the clock type, time display, clock format, and time of day. Display (time of day You can choose from the following options: digital manner.
Settings Timer There are two timers with the following functions: The coffee system: – switches on at a particular time, e.g. in the morning for breakfast (Turn on at) – switches off at a particular time (Turn off at) – switches off after a particular length of time if none of the buttons have been touched or no drink has been made (Turn off after, only for timer 1). You can allocate timer functions to individual days of the week.
Settings Turn off after The Turn off after timer function is only available in Timer 1. If none of the keys have been pressed or no drink has been prepared, the coffee system will turn itself off after 30 minutes to save energy. You can change this to another time of between 15 minutes and 9 hours. Selecting days of the week (day allocation) Select the day of the week you want. The selected day of the week will be marked with a . When all days of the week required are marked: Tap OK.
Settings Eco mode Lighting Eco mode is an energy-saving mode. The steam system does not heat up until a coffee drink or steam for hot milk / milk froth is requested. You have the following options: If Eco mode is switched off, milk froth and hot milk, as well as coffee and espresso, can be made one after another. The steam system remains heated up and much more energy is used. The coffee system will indicate that the energy consumption has been altered.
Settings Start screen You can choose which screen appears when the coffee system is switched on. – Main Menu – Drinks – Profiles – MyMiele Info (displaying information) Under the Info menu option, you can choose to display the number of prepared portions for each type of drink. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled or before the brew unit needs to be degreased (No. of uses until). To return to the previous display: Tap OK.
Settings Water hardness Dispenser adjustment See "Before using for the first time" for information about water hardness. Please see "Dispenser adjustment" for details of this feature. Display brightness Factory default setting You can set the display brightness in the bar chart. You can reset the settings to the settings at delivery (factory default settings). Volume You can set the volume of the buzzer and keypad tones in the bar chart.
Settings lighting will come on, but drinks cannot be dispensed and other actions cannot be carried out. If you activate the Demo mode, you cannot turn the appliance off with the On / Off button .
Cleaning and care The coffee system must be cleaned regularly to prevent a build-up of bacteria.
Cleaning and care Clean by hand or in dishwasher The following must be cleaned by hand only: – Main dispenser cover Danger of burning and scalding on hot components or by hot liquids. Always allow the coffee system to cool down before cleaning it. Caution: Water in the drip tray can be very hot. – Brew unit – Coffee bean container and the coffee bean container lid – Service cover Some components of the coffee system are dishwasher-safe.
Cleaning and care All external surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a breakage. Contact with unsuitable cleaning agents can discolor the external surfaces. Wipe up any spillages or splashes of descaling agent immediately.
Cleaning and care Drip tray Burn hazard! If the rinsing process has just finished, wait a few minutes before removing the drip tray as the water used for rinsing will run out of the coffee dispensers. Clean the drip tray every day to prevent unpleasant odors and mildew. A prompt will appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty it at the latest when this prompt appears.
Cleaning and care Drip tray cover Water tank Remove the drip tray cover. Change the water every day to prevent a build-up of bacteria. The drip tray cover can be cleaned in the dishwasher or by hand using warm water and liquid dish soap. Dry the drip tray cover thoroughly. Make sure that the valve, the underside of the water tank and the surface the water tank sits on are clean. Otherwise the water tank will not sit correctly.
Cleaning and care Waste unit Main dispenser After a certain period of time a reminder to empty the waste unit will appear in the display. The waste unit must be cleaned when this message appears. However, it is better to clean the waste unit every day to prevent a build-up of bacteria.. There will probably also be water in the waste unit left over from the rinsing process. Clean the waste unit daily.
Cleaning and care Press the catch upwards , grasp the dispensing unit by the handle, and pull it forwards and off . Turn upper connecting piece and pull it upwards to remove it. Remove lower connecting piece in the same way. Pull off the dispenser nozzles . The Y-piece connector should not be removed. Clean all parts thoroughly. Hold the dispenser at the sides and pull it forwards to release it.
Cleaning and care Tip: Place the dispenser upright in the top basket of the dishwasher. Lay the adapters and dispenser nozzles in the cutlery tray. Reassemble the dispensing unit in the reverse order. Make sure that upper adapter clicks into position. Press the dispenser nozzles firmly onto the dispensing unit. Make sure that all parts are tightly connected to one another. Refit the dispensing unit in the main dispenser and tap OK. Put the cover back into place and tap OK.
Cleaning and care Sensor cover Maintenance of the milk valve The sensor cover for the cup protection cut-out is located under the main dispenser. If the automatic dispenser adjustment sensors do not clearly recognize a container, this sensor will stop the main dispenser. The milk valve should be cleaned once a week to ensure good quality milk froth without spraying. If required, the sensor cover can be cleaned once a week in the dishwasher or by hand using hot water and liquid dish soap.
Cleaning and care Milk flask with lid Soiling can lead to machine malfunctions. It is important to keep the neck and flange of the milk flask clean (while filling it and carrying it). Taking apart the milk flask lid and cleaning it with the cleaning brush Milk fat can deposit in the milk flask lid. When this happens, milk will spray when milk froth is made. Clean the milk flask holder on the coffee system with a damp cloth.
Cleaning and care Bean container Pull the bean container out of the appliance and pull the lid toward the back and off. Clean the bean container and its lid by hand using warm water and liquid dish soap. Dry both components. Also use the cleaning brush to clean the milk pipework in the lid from the top and bottom. Slide the lid back on, then slide the bean container back into the appliance. To reassemble the lid: First insert the seal into the lid.
Cleaning and care Interior and machine front Main dispenser connector First take out all removable parts and then clean the interior and the machine front with a mild solution of hot water and liquid dish soap. The part which connects the brew unit and the main dispenser is located on the inside of the machine front. Tip: Use your vacuum cleaner to remove dry coffee grounds. A small drip catcher is located inside the front of the machine at the bottom.
Cleaning and care Brew unit Remove the brew unit and wash by hand If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See "Frequently asked questions"). Clean the brew unit by hand only using warm water. Do not use liquid dish soap.The moving parts of the brew unit are lubricated. Liquid dish soap will damage the brew unit. When the brew unit has been pulled out, do not alter the position of the brew unit handle.
Cleaning and care Care programs The following maintenance programs are available: – Rinsing the coffee system – Rinsing the milk pipework – Cleaning the milk pipework – Degreasing the brew unit – Descaling the machine Press the button on the end of the handle of the brew unit and while doing so turn the handle clockwise . Close the machine door. Perform the respective maintenance program when prompted to do so in the display. You will find more information in the following pages.
Cleaning and care Rinsing the coffee system Rinsing the milk pipework After a coffee has been dispensed, the machine pipework is rinsed before it turns off. This removes any residual coffee grounds. Milk residue can clog up the milk pipework. If you have made a drink with milk, the coffee system will rinse the milk pipework automatically after a few minutes. The Drinks menu is displayed. Tap Main Menu or Back. Select Maintenance and then Rinse the Appliance.
Cleaning and care Cleaning the milk pipework Make sure that the milk pipework is cleaned regularly and thoroughly. Milk contains natural bacteria that will multiply if the pipework is not sufficiently clean. Contamination in the coffee system can be a health hazard. The milk pipework must be cleaned approximately once a week. The coffee system will remind you to do this. Three days before the milk pipework must be cleaned, Clean the milk pipework in days appears in the display.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee system. Fill the water tank to the mark with lukewarm water and stir the solution. Please adhere to the mixing ratio. It is important that you do not fill the water tank with too little water, otherwise cleaning will be incomplete.
Cleaning and care When Place a cleaning tablet in the ground coffee chute and close the chute appears in the display: Remove the coffee chute cover and open the lid of the coffee chute. Drop a cleaning tablet into the ground coffee chute. Close the lid, replace the coffee chute cover and close the machine front. Follow the instructions given in the display. If Program Finished appears in the display: Tap OK. The brew unit has now been cleaned.
Descaling the machine Important! When descaling the appliance, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up immediately. Lime scale builds up in the coffee system through use. How often the appliance needs to be descaled will depend on the water hardness level in your area. It should be descaled regularly to ensure that it functions correctly.
Descaling the machine Performing a descale Replace the water tank in the coffee system and close the front. Follow the instructions given in the display. When Fill the water container with fresh tap water up to the descaling symbol appears in the display: Fill the water tank to the mark with lukewarm water. Drop two descaling tablets in the water. Follow the instructions for the mixing ratio carefully. It is important that you do not fill the water tank with too much or too little water.
Descaling the machine Descaling when not prompted by a message Tap Main Menu or Back. Select Maintenance . The descaling process cannot be cancelled once you have tapped "OK." The process has to be completed through to the end. Select Descale. The descaling process will begin.
Frequently Asked Questions Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them. However, please note: Important! Never open the casing of the appliance. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
Frequently Asked Questions Message Possible cause and solution F73 or The brew unit cannot be positioned correctly, or it is dirty and the coffee cannot be processed. Check whether you can remove the brew unit (see "Cleaning and care - Brew unit"). If you can remove the brew unit, clean it (see "Cleaning and care – Brew unit"). Check the brew unit Push the coffee ejector of the brew unit into the correct position (see image). Push the waste unit and the water tank back in the machine.
Frequently Asked Questions Message Possible cause and solution F234 Cup protection switch-off has been activated three times since switching on the coffee system. The cups or glasses being used are not recognized by the automatic dispenser adjustment. Use only cups or glasses that can be recognized by the automatic dispenser adjustment. There is a fault with the automatic dispenser adjustment. Turn the machine off with the On / Off button. Wait for 2 minutes before turning it back on again.
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The display remains dark when the coffee system is turned on using the On / Off button. The On / Off button was not touched for long enough. Tap the On / Off button and keep it pressed for at least 3 seconds. The plug is not properly plugged into the electrical outlet. Insert the plug into the electrical outlet.
Frequently Asked Questions Problem Possible cause and solution The coffee system does The system lock feature has been activated. not switch itself on, al- You need to deactivate the system lock (see "Setthough the timer setting tings - System lock"). Turn on at has been actiA day of the week has not been selected. vated. Check the timer settings and change them if required (see "Settings - Timer"). The machine was not used after being switched on automatically three times in succession.
Frequently Asked Questions Problem Possible cause and solution The machine door will not close. The containers are not pushed all the way in. Check the containers. The door hinges are not correctly aligned. Adjust the door hinges (see "Installation - Adjusting the door hinges"). The door is difficult to open and close. The cap of the main dispenser connector is not sufficiently greased. The silicone cap gets jammed in the brew unit. Check the silicone cap for damage.
Frequently Asked Questions Problem Possible cause and solution During rinsing, no or considerably less rinsing water than usual comes out of the main dispenser. No or considerably less coffee than usual comes out of the main dispenser. The displays and preparation noises are unchanged. The waste unit contains considerably more "coffee water." The main dispenser is not correctly mounted. Make sure the main dispenser has been assembled as described (see "Cleaning and care – Main dispenser").
Frequently Asked Questions Problem Possible cause and solution Loud noises are heard during the descaling program. This is not a fault. These noises occur when water is flushed through the machine at a high pressure. or Preheating is Main Water: On is probably selected and the coffee permanently visible in system is not connected to the water supply. the display. No drinks Fill the water tank. can be prepared. Then check the water setting (see "Settings - Main water").
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its walls, the more important it is to pre-heat it. Pre-heat the cup, for example, with hot water. The brewing temperature is set too low. Set a higher brewing temperature (see "Brewing temperature"). The brew unit filters are blocked. Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Frequently Asked Questions Problem Possible cause and solution The coffee trickles too slowly into the cup. The grind level is too fine. Set the grinder to a coarser setting (see "Grinder setting"). The crema on the coffee or espresso is "not right". The grinder setting is not correct. Set the grinder to a finer or coarser setting (see "Grinder setting"). The brew temperature is too high for the type of coffee being used. Set a lower brewing temperature (see "Brewing temperature").
Frequently Asked Questions Problems when preparing milk Problem Possible cause and solution The milk sprays during dispensing and hissing noises can be heard. Even though milk froth should be prepared, only hot milk emerges from the main dispenser. The milk temperature is too high. Good milk froth can only be achieved when cold milk (below 50°F/10°C) is used. Check the temperature in the milk flask. The milk flask has not be inserted properly so that not only milk, but also air is suctioned in.
Frequently Asked Questions Exchanging the elbow connector If you can prepare only hot milk instead of milk froth, check the following first: – Is the milk in the milk flask cold (< 50°F / 10°C)? – Have the main dispenser and milk flask lid been cleaned carefully? – Is the main dispenser correctly mounted? If you still cannot prepare milk froth, follow the steps described to exchange the elbow connector. You need the elbow connector that was provided as a spare part. Do not use a needle or similar implement.
Frequently Asked Questions Push the tubes back into the elbow connector and replace this in the machine. Make sure that the land on the elbow connector is pointing downwards. Re-insert the air intake tube into the opening . Replace the service cap and close the door.
Technical Service After sales service Warranty In the event of a fault that you cannot correct yourself, please contact For more information, please refer to the included warranty. – Your Miele dealer MieleCare (USA only) or – Miele Technical Service The telephone number for Miele is listed at the back of these instructions. When contacting Miele, please quote the model and machine number of your coffee system. This information is given on the data plate inside your appliance.
Saving energy If the settings of the following functions are altered from the factory default, energy consumption will increase: – Eco mode – Lighting – Time display – Timer 92
Packaging material / Disposal of old machine Disposal of packaging material Disposal of your old appliance The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Old electrical and electronic appliances often still contain valuable materials. However, they also contain harmful substances that were essential for the proper functioning and safe use of the equipment.
Plumbing Notes on connecting to the water supply The appliance must be connected to the water supply by a qualified professional. Disconnect the appliance from the power supply before connecting it to the water line. Turn off the water supply before connecting the water lines for the coffee system. The water being used should meet the drinking water standards of the country where the machine is used.
Plumbing Parts must only be replaced with original Miele spare parts, available from Miele. Connecting the appliance to the water supply line Make sure that the supply line is not kinked or damaged. Remove the water connection cover from the bottom of the back panel of the machine. Take the angled side of the brass fitting and check whether a gasket is present. If not, insert one. Screw the supply line coupling nut onto the threaded union.
Plumbing This product is tested and certified by the WQA against ORD0902 for California "lead free" compliance.
Electrical connection Make sure that the power to the machine is OFF before installing or performing maintenance or repairs. All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous.
Installation Installation and combination options The appliance is designed to be built into a tall unit.
Installation It can also be combined with other Miele built-in appliances. If the coffee system is to be built in above another appliance, there must be a full-width, closed shelf between them.
Installation Ventilation Condensation water can damage the coffee system or surrounding cabinets. The specified ventilation cross-sections absolutely must be observed. Do not cover or block the ventilation cross-sections. Clean the ventilation cross-sections on a regular basis. Due to the heating of water, water steam can condense inside the coffee system and inside the door.
Installation Installing the coffee system Make sure that there is no power to the machine during installation. This also applies when uninstalling. The machine may only be operated when installed and in an ambient temperature range between +50°F (10°C) to +100°F (38°C). For installation, you will require two socket wrenches in sizes 3 and 5. Tip: We recommend providing a place to sit the coffee system which is the same height as the building-in niche.
Installation Adjusting the door hinges If the machine door becomes difficult to open or close after installation, you can adjust the hinges to realign it: Open the appliance door, and partially tighten the side socket screws. Carefully turn the lower socket screws to center the machine in the niche. Tighten both upper socket screws by hand to secure the machine in the unit. Do not over-tighten them. 102 Tighten the screw to align it flush with the cabinet front.
Copyright and licenses Miele uses software to operate and control the appliance. The copyright authorization from Miele and other relevant software suppliers (e.g. Adobe) must be respected. Miele and its suppliers reserve the rights to the software components. In particular the following are prohibited: – copying and distribution, – modifications and derivations, – decompilation, reverse engineering, disassembling and other such reductions of software.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
CVA 6805 en – US, CA M.-Nr.
