Operating and installation instructions Built-in coffee machines CVA 5060 CVA 5068 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - AU, NZ M.-Nr.
Contents Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessories supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Warning and Safety instructions . . . . . .
Contents Settings: customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Setting the timer . . . . . . . . . . . .
Contents Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Rinse the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caring for the environment Disposal of the packing material Disposal of your old appliance or machine The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Electrical and electronic appliances / machines often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment.
Guide to the machine Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow, for scrolling through the various programme options d OK sensor, for confirming the selection of a programme option and for saving a setting e Right arrow, for scrolling through the various programme options f Sensor for selecting hot water g Door grip h Hot water spout i Lighting j Drip tray cover k Central spout, height-adjustable l Stainless steel milk flask 6
Guide to the machine Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container j Central spout connector (connecting the brew unit and the central coffee spout) k Stainless steel milk flask l Central spout connector cap 7
Accessories supplied Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) and additional cap (not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning and rinsing the milk pipework Coffee spoon For adding the correct amount of ground coffee Cleaning powder For daily cleaning of the milk pipework Cleaning tablets For cleaning the brew unit Descaling tablets For descaling the water pipework Other accessories and spare parts – Test stri
Optional accessories Miele accessories and cleaning and conditioning products are available for your coffee machine. These can be ordered via the internet at www.miele-shop.com (depending on country), from Miele or from your Miele Chartered Agent.
Warning and Safety instructions ~ This appliance is not intended for This machine conforms with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on the installation, safety, operation and care of the machine.
Warning and Safety instructions Technical safety ~ Appliances which are built-in behind ~ Before installation, check the a furniture door must only be operated when the door is open. Do not close the furniture door when the appliance is in operation. appliance for visible signs of damage. Never install or attempt to use a damaged appliance.
Warning and Safety instructions ~ The appliance is only completely isolated from the electricity supply when: – the mains fuse is disconnected, – the screw-out fuse is removed (in countries where this is applicable), – it is switched off at the wall socket and the plug is withdrawn. Ensure that current is not supplied to the appliance until after maintenance or repair work has been carried out. ~ Never open the casing of the appliance.
Warning and Safety instructions ~ Do not use coffee beans which have been treated with anything containing caramel, any kind of sugar or any other substances. Do not put drinks containing sugar, or instant coffee in the machine. ~ Never place a drink with ignited alcohol under the central spout of the coffee machine. The flames could ignite plastic components and cause fire damage. ~ Hot water and steam could cause scalding. Be very careful when using these functions.
Using the coffee machine - first steps The following notes should help you get to know your coffee machine before starting to use it. C Controls This machine has sensor controls which react to touch. To operate the machine, you only need to touch the relevant sensor.
Using the coffee machine - first steps When you use the machine for the very first time, you will be prompted to select a language. If everything has been entered correctly, Set up successful will appear in the display. ^ Use the right or left arrow until the language you want appears in the display. ^ Confirm this message by touching the OK sensor. ^ Touch the OK sensor. The language you have chosen is now set. The request to set the clock format will then appear.
Filling the water and coffee bean containers The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee beans. It is vital that you programme in the water hardness level of your water (see "Settings: Customising your machine - Setting the water hardness"). Filling the water container The quality of the water plays an important part in the overall quality of the coffee.
Filling the water and coffee bean containers Filling the coffee bean container Only put roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Do not use coffee beans which have been treated with caramel, sugar or other substances. Do not put drinks containing sugar, or instant coffee in the machine. Sugar will damage the machine. ^ Pull out the coffee bean container. ^ Push back the lid and fill the container with roasted coffee beans.
Making drinks Pre-warming cups Important: the water piping must be rinsed through every day and the machine cleaned thoroughly before the first drink of the day is prepared. This will take place automatically if the Rinsing programme option has been set to "On" and the machine is cold. Hot water will run out of the central spout into the drip tray once the machine has heated up.
Making drinks Adjusting the height of the central spout The height of the central spout can be adjusted to suit the height of the cup so that the drink will not cool down as quickly as it would if the spout were further away from the cup. The crema will also be a better quality if the coffee does not have so far to go! ^ Place a cup under the central spout. The coffee is always dispensed simultaneously from both spouts. Espresso q ^ Slowly pull the central spout downwards.
Making drinks Double portion If you want to dispense a double portion of coffee or espresso or to dispense two portions at the same time: ^ Touch the OK sensor twice whilst "2 portions?" is in the display. The two portions will be dispensed one after the other. ^ To prepare two cups at the same time, place one cup under each jet.
Making drinks If you have not added any ground coffee, you must select "No". Otherwise the machine will assume that there is ground coffee in the chute, and only water will be dispensed the next time coffee is made! To make a drink ^ Place a cup under the central spout. ^ Touch the OK sensor. The machine will prepare espresso or coffee, which will then be dispensed from the central spouts. Do not open the machine door during the brewing process. This will damage the machine.
Making drinks To make drinks with milk, Cappuccino, latte macchiato, hot milk, milk froth ^ Place a suitable cup or glass under both jets. ^ place the lid on the stainless steel milk flask by twisting it anticlockwise until it locks into place. For best results with latte macchiato, the glass should be placed beneath the jets such that the espresso flows into the centre of the milk froth.
Making drinks User profile drinks After use The User profile function is used to select the quantity of water and milk for your drink, as well as the fineness of the ground, temperature and pre-brewing to suit your taste and that of your guests (see "Setting up user profiles"). Before switching the machine off for any length of time, the pipework, brew system, spouts and milk pipework need to be cleaned (see "Cleaning and care: "Rinse the system" and "Clean the milk pipework").
Setting the coffee grinder A good espresso or coffee with a thick, even crema depends not only on the quality, pressure and temperature of the water and the quality of the coffee beans, but also on the quantity of beans and how finely they are ground. The crema is evenly coloured but pale The crema should have an even nut-brown colour with dark stripes running through it.
Settings: customising your machine It is easy to customise your machine to suit your exact requirements. Timer: Here, you can set or activate the timer. The following options are available in the "Set" menu: Settings menu – Switch on at: The machine can be set to switch on at a specific time of day. To select the various programme options: Settings F q r H I J L n m C ^ Touch the right arrow sensor until "Settings" appears in the display, and then touch the OK sensor.
Settings: customising your machine Water hardness: Soft, Medium, Hard, Very hard Display: Contrast, Brightness Volume: Buzzer tones, Keypad tone Showroom prog.: Demo programme, Off Factory default: All settings can be reset to the factory default and user profiles deleted Selecting a language If you want to change the language used in the display, use the Settings menu and follow the flag symbol. ^ Select "Settings F" from the main menu and touch the OK sensor.
Settings: customising your machine Setting the time of day Clock format ^ Select "Settings F" from the main menu and touch the OK sensor. ^ Use the arrow sensors to select "Clock format". Settings Time of day Timer ^ Touch the right arrow sensor until "Time of day" is highlighted and touch the OK sensor. ^ Use the right arrow to select a 24 h or 12 h clock. ^ Touch the OK sensor when the option you want is highlighted. The clock format you have chosen will be saved.
Settings: customising your machine Setting the timer ^ Select "Settings F" from the main menu and touch the OK sensor. Settings Timer Coffee jug ^ Touch the right arrow sensor until "Timer" is highlighted and touch the OK sensor. ^ Select "Set" with the arrow sensors and touch the OK sensor. There are three options: Switch on at: You can choose a time for the coffee machine to switch on automatically, e.g. in the morning for breakfast. ^ Select "Switch on at" with the arrow sensors and touch the OK sensor.
Settings: customising your machine ^ First set the hour with one of the arrow sensors. Touch the OK sensor. ^ Then use the arrow sensors to set the minutes. Touch the OK sensor. The machine will now switch off after the time you have set. If Automatic rinsing is set to "On" and the machine has been used for making drinks, it will automatically carry out a brief rinse before it switches itself off.
Settings: customising your machine Coffee jug (making several cups one after the other) This function can be used to make up to 8 cups of coffee automatically one after the other (max. 1 l). ^ Select "Settings F" from the main menu and touch the OK sensor. Settings Coffee jug Prog. the amount ^ Touch the right arrow sensor until "Coffee jug" is highlighted, and touch the OK sensor. ^ Select the number of cups you wish to make (3 to 8), and confirm with OK.
Settings: customising your machine ^ Use the arrow sensor to select the drink that you wish to set the amount of coffee for and then touch the OK sensor. ^ Use the arrow sensor to set the amount to "more" or "less". ^ Touch the OK sensor to save the setting. Setting Pre-brewing When the Pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure.
Settings: customising your machine Setting Automatic rinsing Setting the Steam system To remove any coffee grounds and residual milk from the system, the water piping must be rinsed through before the first drink of the day is prepared. If Automatic rinsing is selected, the rinse cycle will take place automatically whilst the machine is still cold when the machine is switched on. This will also pre-heat the system because hot water is used for the rinse process.
Settings: customising your machine Lighting: Setting the brightness ^ Select "Lighting" and touch the OK sensor. You can set how bright the lighting should be on the machine: ^ Select "Switch off after" and touch the OK sensor. ^ Select "Settings F" from the main menu, and then touch the OK sensor. ^ Select the switch-off time you want with the arrow sensors and touch the OK sensor. Settings Lighting Info ^ Touch the right arrow sensor until "Lighting" is highlighted, and then touch the OK sensor.
Settings: customising your machine Info (showing the number of drinks) Safety (Activating the System lock) The "Info" option enables you to check how many drinks the machine has already dispensed or how many you can still dispense before it has to be descaled. The machine can be locked to ensure that it is not operated by unsupervised children or persons who are unacquainted with the operating instructions. ^ Select "Settings F" from the main menu, and then touch the OK sensor.
Settings: customising your machine To override the System lock ^ Touch the OK sensor for about 3 seconds. The machine is now temporarily unlocked and can be used to make drinks again. It locks itself as soon as the machine is switched off. Setting the water hardness For trouble-free operation of the coffee machine, and to ensure that the descaling reminder appears in the display at the appropriate time, it is important to set the water hardness level.
Settings: customising your machine – Very hard: Local water hardness levels 3-4 14-21 °d (2.5-3.8 mmol/l) or more Water through-flow: approx. 40 l Steam through-flow: approx. 30 min. ^ Select "Settings F" from the main menu, and then touch the OK sensor. Settings Water hardness Display ^ Use the arrow sensors to highlight "Water hardness" and then touch the OK sensor. ^ Touch one of the arrow sensors to set the water hardness, and then touch the OK sensor.
Settings: customising your machine Showroom programme All settings This function enables the machine to be illuminated in a showroom situtation without the heaters working. This option sets "All settings" back to the factory default. Resetting the factory default settings The "factory default" setting is used to reset the various settings back to the default status. From here you can select whether to reset all settings back to the default or to delete any user profiles.
Settings: customising your machine – Display: Contrast (medium), Brightness (maximum) – Volume: Volume of buzzer tones and keypad tone (maximum setting for both) – User profile: Revert (when switched on). User profiles You can delete all user profiles except for the standard one under "User Profiles". ^ Select "Reset" under "User profiles", and touch the OK sensor. User profiles are then deleted.
Programming the amount: setting the portion sizes The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. Not all espresso and coffee cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme the amount to use. With milky drinks the proportions of espresso, milk and milk froth are important for the taste.
Programming the amount: setting the portion sizes Programming the proportions for cappuccino or latte macchiato via the OK sensor ^ Place the appropriate cup or glass for the amount you want to programme under the spouts. ^ Select Cappuccino or Latte Macchiato. ^ Touch the OK sensor until the display shows the options for Cappuccino (Milk froth, Espresso) or Latte Macchiato (Hot milk, Milk froth, Espresso).
Programming the amount: setting the portion sizes Programming the amount for hot water via the Hot water sensor ^ Place the appropriate cup for the amount you want to programme under the hot water spout. ^ Touch the Hot water sensor until "Prog. the amount" appears in the display. ^ When sufficient water has flowed into the cup touch the Hot water sensor again. "Save" will then appear in the display. Each subsequent portion of hot water will then have the same amount.
Setting up User profiles To cater for different tastes and preferences, you can enter up to 9 individual User profiles. For each User profile, you can select the following individual settings: – The amount of water for coffee-based drinks and hot water – The amount of milk for drinks with milk – The water temperature – Pre-brewing (See "Programming the amount: setting the proportions" and "Settings: customising your machine").
Setting up User profiles Creating a User profile Saving an entry ^ Use the arrow sensors to highlight "Create", and then touch the OK sensor. ^ When you have finished making your entry, use the arrow sensors to highlight the word "OK" and then touch the OK sensor. You can allocate up to 9 User profiles. If you try to allocate more than 9 User profiles, "Memory full" will appear in the display and you will need to delete one name to create space. Letters and numbers will now appear in the display.
Setting up User profiles Deleting a User profile After each use If you want to delete the User profile completely, The machine will automatically revert to the Standard User profile each time a drink is dispensed. ^ Select "Delete User profile" using the OK sensor. ^ Use the arrow sensors to select the user profile you want to delete. ^ Touch the OK sensor. A tick will appear after the user profile and after a short while it will be deleted.
Cleaning and care Overview Clean the coffee machine regularly to avoid a build-up of bacteria.
Cleaning and care Rinse the system Always allow the machine to cool down before cleaning. Please be aware that the water in the drip tray will be hot. Danger of scalding. Do not clean the machine with a steam cleaner as this will damage the machine. Do not use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface. It is important to clean the machine regularly, as the used coffee grounds will soon go mouldy.
Cleaning and care Milk pipework Clean milk pipework Rinse milk pipework To prevent milk going off in the machine and the pipework getting clogged up, it should be rinsed through after use. Rinsing is not a substitute for cleaning the pipework through at the end of the day. Maintenance q r H I J L n m C ^ Touch the right arrow sensor to highlight the maintenance symbol and touch the OK sensor. ^ Select "Rinse milk pipework" and touch the OK sensor. ^ Select "Start" and touch the OK sensor.
Cleaning and care Clean milk pipework of any blockages If you are getting steam instead of milk from the central spout the milk pipework in the machine is probably blocked. To clean the pipework in the lid for the stainless steel milk flask, fill the larger of the two plastic containers to the "max." mark with lukewarm water to dissolve the cleaning agent. Fit the lid from the milk flask to the container, making sure that it engages correctly.
Cleaning and care The hoses can now be cleaned with a brush under running water. ^ Take the cover off together with the milk pipework. Clean the whole component in the dishwasher without dismantling it. If there is still residual milk in the pipework after this, use the cleaning brush supplied to remove it. To do so, dismantle the cover and the milk pipework as follows: Do not take the milk pipework out of its holder. This could cause the pipes to leak. ^ Push the brush into both milk pipes from below.
Cleaning and care Stainless steel milk flask The stainless steel milk flask and lid must be washed by hand using hot water. ^ Now push the milk pipes into the guides (a) and push the spout holder (b) back on. It should click into place. ^ Fit the cover with the milk pipes back into position behind the machine front. ^ Re-fit the central spout (see "Central spout"). 50 It is important to keep the top of the flask and the seals clean (whilst filling it and carrying it).
Cleaning and care The central spout ^ Pull the central spout down as far as it will go (a), and pull the cover forwards to remove. ^ Remove the two rubber stoppers (a), and manually clean these and the jets thoroughly. If required, remove the bypass tube (b) as well. You can loosen possible blockages in the bypass tube by kneading it with your fingers or blowing air through it. Do not use a pin or other sharp object as these will damage components.
Cleaning and care Water container Waste container Empty the water container daily and fill with fresh, cold tap water just before use. After a certain period of time a reminder to empty the waste container will appear in the display. The waste container must be cleaned when this message appears. However it is better to clean the waste container every day to prevent coffee grounds from turning mouldy. There will probably also be water in the waste container left over from the rinsing process.
Cleaning and care Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. However, to avoid a build-up of odours, the drip tray should be cleaned every day. After running the last rinse, you should leave the drip tray in position for a while before cleaning it so that you catch any remaining water from the system.
Cleaning and care Coffee bean container The coffee bean container must be cleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container out of the machine and then push the lid back to remove it. Interior and machine door ^ First take out all removable parts and then clean the interior and the machine door with a mild solution of hot water and washing-up liquid. Use your vacuum cleaner to remove dry ground coffee residues.
Cleaning and care Brew unit The brew unit must be cleaned once a week by hand and without using washing-up liquid, because the moving parts are lubricated and the rubber seals could become brittle in a dishwasher. Leave the handle in the same position, otherwise the brew unit will be out of alignment and you will not be able to push it back into the coffee machine. ^ Remove the water container, waste container and the coffee chute cover. ^ Wipe any remaining coffee off the two perforated plates.
Cleaning and care Maintenance q r H I J L n m C ^ Touch the right arrow sensor to highlight the maintenance symbol and touch the OK sensor. ^ Select "Clean brew unit" and touch the OK sensor. ^ Press the light-coloured button under the handle of the brew unit a and whilst doing so turn the handle in the direction of the arrow b. ^ Select "Start" and touch the OK sensor. Various messages will now appear in the display. Degreasing the brew unit ^ Follow the instructions given.
Cleaning and care When prompted to Drop a cleaning tablet in the ground coffee chute, Machine front If soiling is not removed promptly, it could cause the surface of the machine to alter or discolour. Remove any soiling immediately. ^ Switch the machine off with the On/Off button. ^ remove the coffee chute cover and open the lid of the coffee chute. ^ Place a cleaning tablet into the coffee chute. ^ Close the lid, replace the coffee chute cover and close the machine door. ^ Follow the instructions given.
Cleaning and care Avoid the following on all types of front: – cleaning agents containing soda, amonia, acids or chlorides, – solvent-based cleaning agents, – cleaning agents containing descaling agents, – stainless steel cleaning agents, – dishwasher cleaner, – abrasive cleaning agents, e.g. powder cleaners and cream cleaners, – hard, abrasive sponges, e.g. pot scourers, brushes or sponges which have been previously used with abrasive cleaning agents, – sponge eraser, – sharp metal scrapers.
Descaling the machine The machine should be descaled regularly to ensure that it functions correctly. It will remind you when this needs to be carried out. When only 50 portions can be made before the next descaling programme has to be run, the following message will appear in the display the first time: No. of portions until descaling: 50. The remaining number of drinks that can be made before descaling will now show in the display after each drink is made. ^ Confirm the message by touching the OK sensor.
Descaling the machine To run the descaling programme To dissolve the descaling tablets Maintenance q r H I J L n m C ^ Touch the right arrow sensor until "Maintenance" is highlighted, and confirm with OK, or, ^ if the machine is switched off, touch the OK sensor whilst the machine is switched off. ^ Select "Descale" and touch the OK sensor. ^ Select "Start" and touch the OK sensor. The display will guide you through the whole procedure.
Problem solving guide ... nothing appears in the display. Repair work to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Various messages will appear in the display to warn of certain problems.
Problem solving guide ... the machine does not switch on even although the "Switch on at" setting for the timer has been activated. ... milk froth or milk is not flowing freely or not at all out of the central spout. The system lock has been activated. ^ Clean the central spout (taking special care to clean the rubber stoppers thoroughly) and the milk pipework as described in "Cleaning and care". ^ Deactivate it. (See "Settings: Customising your machine - Safety: Activating the system lock").
Problem solving guide ... the coffee grinder makes a louder noise than usual. There may be stones in amongst the coffee beans, or the bean container may have emptied during grinding. ^ Switch the machine off immediately. ^ If the bean container is not empty, call Miele. If it is empty, fill the container with fresh beans. ... the espresso is dispensed too quickly. The coffee is too coarsely ground. ^ Set the grinder on a finer setting (see "Setting the coffee grinder"). ...
Problem solving guide ... coffee preparation has been interrupted. If the water container empties whilst a drink is being prepared, a message will appear in the display to ask if you wish for the drink preparation to continue after the water container has been refilled. If you do not respond to this question with "OK" within 5 minutes, drink preparation will be cancelled. ... only water is dispensed when coffee has been selected.
Problem solving guide ... there is a lot of residual "coffee water" in the waste container. If the slide control for the grinder is set to too coarse a setting, too much residual "coffee water" can be left in the waste container. ^ Set the grinder on a slightly finer setting (see "Setting the coffee grinder"). ^ If necessary, adjust the amount of coffee (see "Settings: Customising your machine - Setting the amount of coffee"). ... the coffee machine makes loud noises during the descaling programme.
Problem solving guide ... the crema is not as it should be. ^ Check that the grinder setting is not too coarse or too fine, and adjust accordingly (see "Setting the coffee grinder"). ^ Check the temperatures the different types of coffee have been set to. If the temperature is too high, there will be dark patches in the crema. Reduce the temperature (see "Settings: Customising your machine - Setting the temperature").
Problem solving guide ... The message "Fault - 1" to " Fault 4", or " Fault - 80" to " Fault - 83" appears in the display? ^ Switch off the machine and wait for approx. 1 hour before switching it back on again. If this fault message continues to appear in the display, please call Miele. ... the message "Fault - 73" appears in the display. The brew unit cannot be positioned correctly. ^ Take the brew unit out of the machine and clean it thoroughly (see "Cleaning and care - Brew unit"). ...
Problem solving guide ... the message "Fault -74" or "Fault 77" appears in the display? ^ Switch off the machine and shortly after switch it back on again. If this fault message continues to appear in the display, please call Miele. ... the message "Check the brew unit" appears in the display. The brew unit may be dirty. ^ Follow the instructions in the display. ^ Clean the brew unit (see "Cleaning and care - Brew unit").
After sales service In the event of a fault which you cannot correct yourself, please contact: – your Miele Chartered Agent or – Miele The telephone number and address for Miele is given on the back page. When contacting your Chartered Agent or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your appliance. Warranty The warranty for this appliance is 2 years. For further information, please refer to your warranty booklet.
Electrical connection All electrical work should be carried out only by a suitably competent person, in strict accordance with national and local safety regulations. The machine is supplied with a mains cable with moulded plug for connection to a 220 - 240 V mains supply. The voltage, rated load and plug rating are given on the data plate. Please ensure these match the household mains supply. Connection should be made via a switched socket which is easily accessible after installation.
Installation Building-in and combination options The appliance is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. The machine can also be installed in a mobile unit which is available to purchase.
Installation Installation Before installation make sure that there is no power supply to the machine. This also applies should it ever need to be taken out of its housing unit. The machine may only be used when it has been built in. It can only be used in areas with an ambient temperature of +15 °C to +60 °C. You will need two Allen keys (size 3 and 5) for installing the machine.
Installation Adjusting the door hinges If the machine door becomes difficult to open or close after installation, you can adjust the hinges to realign it: ^ Carefully turn the lower socket screws a to centre the machine in the niche. ^ Tighten both upper socket screws b by hand to secure the machine in the unit. Do not overtighten them. ^ To adjust the door in direction a, turn screw a. ^ To adjust the door forwards or backwards (direction b), turn screw b.
Alteration rights reserved / 0511 CVA 5060, CVA 5068 M.-Nr.