dimension guide

ManualsBrandsMiele ManualsElectric CooktopCombiSet™ 14.94" Electric Barbecue Grill Cooktop-Stainless Steel-CS1322BGE240V

Product and Cut-out Dimensions Page 1 of 5

CS 1322 BG Electric Barbecue CombiSet

1322

Electric

Barbecue

CombiSet

Location Codes

1 – Spring clips

2 – Appliance front

3 – Installation height

4 – Power supply box with connection cable, Length = 47 ¼” (1200 mm)

208 V 60 Hz 20 A fuse rating

208 V, 60 Hz, 20 A fuse rating

240 V, 60 Hz, 15 A fuse rating

Ensu

re that the power outlet is accessible after installation

5 – Drain valve – Ensure that the underside of the appliance is always accessible for draining away the water.

6 – Rating label – Ensure that the electrical supply matches the rating. Adhere rating label sticker supplied with the

appliance into the manual.

Shipping weight 44 lbs (20 kg)

Shipping dimensions 26” (660 mm) L x 19” (483 mm) W x 12” (305 mm) H

Notes

Indoor use

The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of

the appliance provides a sufficient seal for the countertop.

All installations must be done in accordance with local codes.

Drawing is not to scale Specification Sheets OJS

02212012

Summary of content (5 pages)

PAGE 1
Product and Cut-out Dimensions Page 1 of 5 CS 1322 BG Electric Barbecue CombiSet Location Codes 1 – Spring clips 2 – Appliance front 3 – Installation height 4 – Power supply box with connection cable, Length = 47 ¼” (1200 mm) V, 60 Hz Hz, 20 A fuse rating 208 V 240 V, 60 Hz, 15 A fuse rating Ensure that the power outlet is accessible after installation 5 – Drain valve – Ensure that the underside of the appliance is always accessible for draining away the water.
PAGE 2
Product and Cut-out Dimensions Page 2 of 5 CS 1322 BG Electric Barbecue CombiSet Cut-out Dimensions For two CombiSet Appliances Cut-out Dimensions For three CombiSet Appliances For the installation of two appliances the width of the countertop cut-out D is the sum of A and C. For the installation of three appliances the width of the countertop cut-out D is the sum of A and B and C.
PAGE 3
Product and Cut-out Dimensions Page 3 of 5 CS 1322 BG Electric Barbecue CombiSet The illustration above represents the attachment of spring clips 1 and support bars 2 for 3 appliances An additional support bar is required for each additional appliance. The position for the attachment of an additional support bar depends on the width of appliance B.
PAGE 4
Product and Cut-out Dimensions Page 4 of 5 CS 1322 BG Electric Barbecue CombiSet Safety distances to back wall 1 – Wall frame 2 – Wall covering x = thickness of the wall covering 3 – Countertop 4 – Countertop cut-out 5 – Minimum safety distance with flammable materials 2" (50 mm) with non-flammable materials 2" (50 mm) minus x If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high temperatures can damage these materials.
PAGE 5
Product and Cut-out Dimensions Page 5 of 5 CS 1322 BG Electric Barbecue CombiSet Safety distance above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the electric barbeque and the hood above it. See the installation i t ti instructions ffor th the h hood d ffor th these safety f t measurements. t If the hood manufacturers instructions are not available or if flammable objects are installed over the electric barbecue (e.g. cabinets, utensil rail, etc.