User manual

22
Lift the release catch for the dust
compartment lid and raise the lid as
far as it will go.
The dustbag has a flap which closes
automatically when the dust compart-
ment lid is raised to prevent any dust
escaping.
Pull the dustbag out by the grip on
the collar.
Fit the new dustbag in the blue
holder as far as it will go. Leave it fol-
ded up when you take it out of the
box.
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
A safety device prevents the lid clos-
ing without a dustbag in place. Do
not use force!
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
When to change the motor protection
filter
Replace this filter every time you start a
new packet of dustbags.
Every packet of original Miele dustbags
contains a motor protection filter. Mul-
tipacks contain four motor protection
filters (only available in selected coun-
tries).
How to change the motor protection
filter
Open the dust compartment lid.