User manual

Warning and Safety instructions

 The Miele Electrobrush is a motor driven accessory for use only

with Miele vacuum cleaners. For safety reasons, the cleaner must

not be used with an Electrobrush produced by another manufacturer.

 While the vacuum cleaner is under warranty, repairs should only

be undertaken by a Miele authorised service technician. Otherwise

the warranty will be invalidated.

 Do not use the vacuum cleaner if the cable is damaged. If the

cable is damaged it must be replaced together with a complete

cable rewind. For safety reasons this must only be done by Miele

Service or a Miele authorised service technician.

 Do not pull or carry the vacuum cleaner by the cable, and be care-

ful not to damage the cable when withdrawing the plug from the

socket. Keep the cable away from sharp edges and do not let it get

squashed, for example, under a door. Avoid running the vacuum

cleaner over the cable. This could damage the cable, plug or socket.

The appliance must not be used if any of these have suffered dam-

age.

 When vacuuming, in particular fine dust, e.g. sawdust, sand,

plaster, flour, talcum powder etc., electrostatic charges build up nat-

urally. Under certain conditions these charges will be released. To

avoid the unpleasant effects of these discharges, a metal inlay has

been incorporated into the underside of the handle. Please make

sure that you keep your hand in constant contact with this metal

strip during vacuuming.

 Do not allow the vacuum cleaner or Electrobrush, telescopic suc-

tion tube or suction hose to get wet. Clean only with a dry or slightly

damp cloth.

 The Electrobrush, telescopic suction tube and suction hose con-

tain electrical cables. The plug connectors must not come into con-

tact with water. Danger of electric shock. They should only be

cleaned with a dry cloth.